Satellite 4090XCDT - Memory Upgrade help needed

Similar Questions

• Alienware Area 51 R2 memory upgrade help

  Hello

  I recently ordered an Alienware R2 with 16 GB of memory. It is still being built / shipped. I have decided to upgrade the memory up to 32 GB, however, I can't find any information to see if there are homes of free memory opened on the computer when it comes with 16 GB? Could someone tell me?

  In addition, because I don't have yet a series number, I couldn't find the memory upgrade to this unit on the Dell Web site. Could someone tell me a reference number for the upgrade of memory? 2 x 8 GB

  Thank you very much for the help!

  You will probably get a better response if you re - this post in the forum of Alienware Club where people hang out.

• Satellite A60 memory upgrade does not help

  Hi, I have a Satellite A60-793 and I want to upgrade the memory by adding a 512 MB of memory currently installed.

  I tried to install a 512 MB DDR PC2700 333 MHz SODIMM module, but the system does not boot to the top: it emits a long whistle blow and then stops automatically. If I remove the module, the system starts properly.

  I have already updated my BIOS, I here something more, I can do to make it work?

  You simply used bad, faulty or not fully considered supported modules.

  Recommend to test it with another new

• Satellite C660 1E2 - memory upgrade help

  Hello

  I have this laptop which came with Windows 7 and 1 GB of memory - I found very slow the 1 GB and bought an extra 4 GB of crucial DDR3 PC3-8500. When I install the new memory it is bios but Windows crashes (blue screen).

  I don't check before hand, but the existing memory DDR3 PC3-10600, I know running 2 speeds at the same time is not ideal, but it does not have the 4 GB with the 1 GB or on its own.

  Does anyone have ideas - PC3-10600 speed do I need?

  Thanks in advance,

  Craig

  According to specification for laptop, your laptop must be delivered with 2 GB of RAM.
  Are you sure that 1 GB is inside?

  In any case, your laptop can be upgraded up to 8 GB of RAM and compatible RAM modules are:
  1 GB DDR3-1066
  PA3675U-1M1G

  2 GB DDR3 - 1066
  PA3676U-1M2G

  4 GB DDR3 - 1066
  PA3677U-1M4G

  Please check specifications for these modules using the part number. I assume that you now have a problem of compatibility.
  What brand is the new RAM?

• Satellite 4010CDT memory upgrade

  Can someone help me with this OLD problem... ?

  How memory is changed in the satellite 4010cdt series... ?
  I have looked in all the obvious places, but can't see where she could go

  Thank you

  Hello

  I found some information:
  First of all, you can use a 128 MB module and you can upgrade the memory maximum. 160 MB (internal memory of 32 MB, 128 MB)

  AFAIK memory module housing is under the keyboard.
  You need to remove the keyboard to upgrade the memory.
  But if you remove the keyboard, you have to be careful.

• Satellite 2140cds MEMORY UPGRADE PROBLEMS

  I currently own a 2140CDS satellite with 32 MB of ram standard.

  I bought a module of memory of 128 MB (128 MB 144pin SODIMM PC100 3.3V CL = 2) of technology crucial to take my ram up to the maximum of 160 MB.

  When I install the RAM, the computer doesn't recognize it, and I get no error while starting the system, the system shows still 32 MB

  I had verified memory module and it works well, I had my slot memory computers checked to see if he had any problem with it. The computer and the module of memory seem to have no failure.

  Can anyone give me a hint or help to solve this problem.
  If I need to use memory from another provider IE KINGSTON

  Concerning

  Scott Bremner

  Hi Scott,.

  I suggest these two modules autour swapping or just use the new 128 MB module to the main location.

  Also, make sure that the modules of memory are firmly and correctly locked in place.

  The normal recommendation is to use only authentic RAM Toshiba modules, but personally, I use the RAM modules that I got from ORCA, so I don't think that there should be no problem with your crucial.

  HTH

• Re: Satellite M100 - Memory Upgrade - Recovery CD

  I want to upgrade memory. It would affect my recovery process because it allows to detect a different set of equipment being installed?

  Another question is, does anyone know how to recover your Windows product key, as I only have the XP Recovery CD. Lost the box.

  Thank you

  Hello

  Just a few answers to your questions:
  > It would affect my recovery process because it allows to detect a different set of equipment being installed?
  N ° upgrade RAM has no influence on the recovery procedure. Just be sure that you are using compatible RAM modules
  > Does anyone know how to recover your Windows product key, as I only have the XP Recovery CD
  When you use original CD facilities of Toshiba Recovery for your model Mobile you did you need to activate it using the Windows key.
  http://APS2.toshiba-tro.de/KB0/FAQ6701IF0002R01.htm

  If you have any other questions please let me know.
  Good bye

• Satellite L505D - memory upgrade Possible?

  Hi all.

  I have laptop Satellite L505D-S5965. It has 3 GB memory DDR2 SDRAM 333 MHz. Specifications are here:
  http://www.CNET.com/laptops/Toshiba-Satellite-L505D-s5965/4507-3121_7-33695859.html

  I could install 2 times x 4 GB DDR3 800 MHz in this laptop? My CPU/motherboard support it? Or can I install DDR2 600 Mhz SDRAM?

  I saw a couple of laptops same on ebay that had mentioned DDR3.

  I don't know, but the motherboard is probably V000185540. It has a AMD X 2 QL - 65 processors.
  CPU info can be found here:
  http://www.CPU-world.com/CPUs/K8/AMD-Athlon%2064%20X2%20QL-65%20-%20AMQL65DAM22GG.html
  It is stated that the speed of the bus
  333 MHz dual channel DDR2 SDRAM memory controller
  One 2000 MHz 16 - bit HyperTransport link
  Made it me confused - this is the maximum speed of memory, I can install it?

  AMD 780 G with SB700 south bridge chipset is.

  Operating system is Windows 7, should be no problem with it.

  If someone wants to be able to answer my question, I would appreciate it a lot.

  Post edited by: Scandic

  > Can I install 2 times x 4 GB DDR3 800 MHz in this laptop?

  I put t understand why ask you this question?
  You have validated the page with specifications and it is said clearly: Max RAM taken in charge: 8 GB
  So you can use 2 x 4 GB RAM modules

  The speed of the RAM depends on the speed of the front side Bus: care page says: 800 Mhz.
  So still fastest of all the RAM would go to 800 Mhz

  > Can't do my CPU/motherboard? Or can I install DDR2 600 Mhz SDRAM?
  You cannot mix DDR3 and DDR2. Both are physically different.

• HP m9500y memory upgrade help

  Hi people,

  I have a desktop HP Pavilion Elite m9500y with 8 GB of ram installed.  It supports 16 gb and I am having trouble locating the 4 GB modules to install and replace the 4x2gb modules here.  I want to use Dual Channel for performance improvements that accompany it.  My research shows that I can use DDR II SDRAM 800 Mhz memory.   Anyone know where I can find the memory and what it will cost to upgrade?  I checked Kingston, PNY and a few others with no luck.

  Thank you

  Steve

  Hi, Steve:

  I couldn't find any either when I checked Crucial site, even though it states your PC can take 16 GB memory PC2.

  You run the dual channel mode right now if you have installed 4x2GB strips.

  NewEgg.com sells PC2-6400 4 GB chips of some manufacturers.

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007611%20600006067%20600006107&IsNodeId=1&name=DDR2%20800%20%28PC2%206400%29

  Paul

• Satellite P200D Memory Upgrade

  If I buy the Toshiba Ginga USB 16 GB stick it to increase the memory on my laptop I have spin short so that wouldn't be a good this what else I can do, you can propably guess I don't know anything about the technical side of pc

  > If I buy the Toshiba Ginga USB 16 GB stick it to increase the memory on my laptop

  There is no relationship between the usb stick memory and laptop. You can use it to store data, external storage device.

• Power supply and graphics upgrade help needed

  Looking to upgrade my graphics card and psu.
  
  Current system is HP p6360uk
  I7 860 Lynnfield 2.8 ghz
  Iona 7613 motherboard
  6 GB of ram
  HD5450 1 GB graphics card
  300 watt PSU
  
  Graphics card, I'm looking to be either R7 250/260 2 GB
  
  Power supply will be Corsair modular cx500m
  
  Mainly play games such as Dirt2 and Dirt3. Dirt2 plays ok at the time, Dirt3 works however only very few details.
  
  All advice welcome, thanks in advance!

  Hello

  The R7 AMD 250 or 260 according to the brand and the model will have enough performance to run Dirt 2 and Dirt 3.  The Corsair CX500m is a good choice.

• My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

  I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

  You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

  (138456)

• Satellite 4090xcdt: Exchange of conventional memory

  Hello

  I got laptop repair Toshiba Satellite 4090xcdt.
  It turns out that managers be damaged (I scanned program Memtest-86 v.3.3) error after Exchange came out continually.

  It turned out that the laptop has a component of 64 megs more and it just, it causes errors.
  My question is the following: is the framework integrated or well placed somewhere in the envelope?

  If the first possibility, it was he able him to turn off {np. the PIN on the plate (I biosie search - the lack of results), if the second how oneself for him to obtain and take upon himself.}

  I'm sorry for the language...

  It of very difficult to understand what you mean but I think that you want to update the memory.
  AFAIK This oldie was equipped with internal memory of 64 MB.
  If you want you can upgrade memory for max 192 MB (64 MB + 128 MB)

  You can use the PA2062U 128 MB SDRAM module.
  These modules are very rare, because the new series of notebooks don't support this type of modules!

• Satellite 4090xcdt - Question about hardware upgrade?

  Hello!
  I want to upgrade the hardware in my old satellite 4090xcdt so I want to know what is possible.
  1. HARD drive: is there a maximum or something else?
  2 DVD: is it possible to replace the CD on a dvd player? How can I remove the cd player?
  3 CPU: is it possible to replace the CPU with a bit more recent? If so, how?

  Thank you in advance!

  Hello

  This unit is an oldie. It s about 7 years and as far as I know it has been bundled with a 4 GB HARD drive.
  Unfortunately I put t believe that more HARD drive be recognized on this laptop.
  The series XCDT supports 4GB max and XDVD series supports hard drives 6 GB.
  Xdvd models were shipped with a DVD - rom drive and these models have been supported: SD-C2102 and SD-C2202
  In addition, it is not possible to upgrade the processor.

• Satellite L500-1KK - upgrade of the memory

  Hello

  My L500-1kk came with the following memory specifications:

  Standard memory: 4 096 (2 048 + 2 048) MB
  maximum extension: 8 192 MB
  technology: DDR2 RAM (800 MHz)

  Locations of memory expansion 2 × (1 to configure)

  1. now, I need to update my system to 8 GB, because it says that my system has 2 x memory slots, and it is Mo (2 048 + 2 048), does that mean I need to replace the original modules with 4 GB modules?

  2 (1 for configure) means? is it an empty space where I can add a 4 GB module?

  3. what else do I need to know about adding memory to my system?

  Thank you

  Hey,.

  If you want to switch to 8 GB of RAM, you must remove the two modules of 2 GB (current) and purchase two 4 GB modules.

  As you have already written in the memory specifications, you need RAM DDR2 800 MHz.

  You can buy new memory modules in an ASP or check you some online stores. Kingston is also good RAM modules.

  Interesting information about the upgrade of RAM you will find also in your manual!