Satellite 5105 CD/DVD Rom Drivers

Similar Questions

• Hello, I accidentally unistall my drivers cd/dvd rom. Peut help click my cd/dvd rom drivers.

  Hello, I accidentally unistall my drivers cd/dvd rom. Peut help click my cd/dvd rom drivers.

  You should not have to open your computer.

  Click Start, type: Device Manager

  Press enter on your keyboard

  Click Find hardware changes on the toolbar

  Your optical drives should be redétectés. Restart your computer and see if it shows up.

  If this does not work, try the following suggestions by Rob Brown MS - MVP

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

• Satellite Pro 2100: DVD - ROM not detected - need drivers

  Hello
  My DVD ROM disappeared also from 'my computer' and in the Device Manager.
  Where can I get a driver for the standard DVD ROM?
  Computer does not see the disk, how ' do it see the player "so that I can install the driver?

  All the words of wisdom?

  Hey riri,.

  Check in Device Manager to see if your DVD-ROM is listed and if so was it an exclamation mark against it? If it is, then simply remove it from your system and restart. Windows will identify as a new device and install with the correct driver.

  It is also possible that the drive may have 'disappeared' If you have recently removed any software DVD. It is a known issue and a solution is described in the following Microsoft Knowledge Base article: -.

  http://support.Microsoft.com/kb/320553/en-us

  Kind regards

• Satellite P10-304-DVD-ROM/CD-RW questions!

  Hello world

  I own one of the original computers Satellite P10-304, which has a DVD-ROM/CD-RW combo drive. For these last months, we have one or two problems with that. It was a little skittish in which CD it reads, but in the last days he almost completely stopped read correctly (audio/data) CD / DVDs. He doesn't seem to know they are there. However, the Player opens and runs well, as if it were playing the CD, but nothing happens on the PC.

  Curiously, I then looked on the list of the system, and the DVD-ROM/CD-RW driver had an excalamation mark. Even more curiously, the pilot was called TOSIICA! DWD something or other, when I'm sure it should have been DVD TOSHIBA etc.etc. Following the instructions, I uninstalled and then tried to reinstall, but it does not appear now when I try to add hardware.

  Confusing.

  I would be very grateful if anyone has any suggestions?

  See you soon,.

  Ian.

  Hello

  It looks like a car damage registry entry.
  But that is only my suggestion. The other possibility is broken (lens calibration problem) by car.
  You say that you have already removed the drive from the Device Manager, but the peut t OS recognizes the drive again. Well, in this case one of the possibilities is to use the System Restore tool or retrieve the device with the recovery CD.
  But if the drive is broken recovery procedure doesn t help. In this case, only the replacement of the drive can solve this problem.

• Satellite 4090XCDT - updated DVD-ROM CD-ROM

  I have my daughters old Satellite 4090 & installed me o/s and improved for max 192 MB of Ram. I can't upgrade HDD as this is incorporated.
  I've cleaned inside & it runs good considering the age & the whole package.

  It is for my granddaughter to use as a computer 1 learning.
  I also tried to upgrade the CD for Toshiba SD - C2202 DVD-ROM.
  I have this installed and I can read the CD ok but can not read the DVD.

  I was unable to locate a driver that can help.
  I would like suggestions, I'm assuming that the dvd - rom works well.
  This is a used unit bought on ebay.

  First of all the CD/DVD drive little matter if this player s only a CD or DVD, doesn t need no 3rd party driver!
  Windows Microsoft own driver controls the CD/DVD drive and I think that the disc is properly recognized in Device Manager.

  > I have this installed and I can read the CD ok but can not read the DVD.
  I guess you want to play a DVD for a movie. Am I wrong?
  Well, you need a DVD playback software to play a DVD movie.
  I use WinDVD program. It was already installed on my Toshiba laptop
  But there are a lot of freeware apps that are able to play DVD movies too.

  Google has just a little bit.

• CD and DVD-Rom drivers have suddenly stopped working

  Device drivers CD/DVD-Rom does not recognize the CD and have suddenly stopped working.

  you have changed the cd rom or dvd rom and does not recognize the CD... go to my computer and you see that there is no cd/DVD-rom installed - there is the http://support.microsoft.com/mats/cd_dvd_drive_problems/ solution

• CD/DVD Rom Drivers

  I need drivers for CD/DVD Rom

  Hello

  CD and DVD player, most, not all, use the default Windows drivers. Try the methods here and
  If necessary check with the manufacturer of system support and Forums (if any) as well as the real
  manufacturer of disc/device support.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Im trying your doing a clean install of windows 7 and it says cd/dvd rom drivers are missing

  Installation does not go as expected, ive installed 100's of times and now im getting cddvd rom drivers are missing and help guys

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

  Go into the BIOS to start the computer and change the setting from IDE to AHCI. This allows Windows 7 to recognize the SATA CD or DVD ROM drive you dΘmarrez since and it should install.

  This probably won't work if your CD/DVD-ROM is not a SATA drive.

• Satellite A200 - HD DVD ROM is not working

  Hello

  Can someone give me advice what to do with my HD DVD ROM It's playback discs after departure upward but then if I don't play anything for a while (30 minutes or 1 hour) and then try to play HD DVD ROM stopped reading anything and the laptop became frozen. Sometimes it even stops with the error message.

  If I restart my computer then HD DVD ROM still works but for a short time.

  What should I do?

  Kind regards
  Olga

  You have cd/dvd utilities in the system tray? Maybe they are causing a problem.

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Re: Portable Satellite C - CD/DVD Rom drive is corrupt

  My driver for the CD-ROM/DVD-Rom drive is corrupted TSSTcorp CDDVDW TS L633C
  (Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19))

  I UNINSTALLED THE DRIVER AND RE STARTED BUT GET THE SAME ERROR
  Do you know where I can load an update.

  Jer

  I think that you are using Windows 7 (or vista or XP) then there is automatic and manual setting set for code 19 here - http://support.microsoft.com/kb/982116

• Satellite S1800-750 - DVD ROM Drive doesn't recognize any CD or DVD

  Hello together,

  I have the following problem:

  In my DVD ROM drive are recognized any CD or DVD.

  But not fundamentally CD or DVD sometimes separate that sometimes the other!

  Where is that which can do here?

  Should I change the DVD ROM drive?

  Help me please!

  JMK!

  Hello JMK

  Can you please be more specific? You have this problem with the original media, self created or if you want to burn own media?

  As far as I know this unit is 4 years old and it is really possible that laser calibration don t work much more and it can happen that in short time you will not be able to use the DVD at all.

• Satellite L750-11W - DVD rom doesn't read any DVD

  The problem is very annoying, that the dvd rom is not reading my dvd;

  I tried to install a game on a dvd but it doen't want to read it, I have, but another dvd (different game) and it read; the two DVD works on other laptops (I checked)

  DVDs are not made by me, they are purchased in the store

  any ideas on what's going on? I reinstalled the driver but nothing

  I use w7 ultimate x 64

  I found your other son that you posted some time there is failure of CD/DVD drive.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=72663

  My idea was to clean the laser lens, but has already been suggested in other threads as well.

  In my opinion, there is not much to do sometimes firmware could be updated to improve the compatibility between the different discs, but this is possible only in case these packages would be available.
  I checked the page of the Toshiba UE driver and firmware update is not available for the series L750.
  So I guess that your problem is related to the WEIRD malfunction.

• Satellite A200-27R dvd/rom dirve works not

  I got an A-200-27R (vista) and the dvd rom is not reading the disks.
  ~ I woke up this morning to find my hard drive has completely disappeared.

  So ive deleted and on google uppercase letters in the registery files and sent back the icon in my computer page.
  But even when I put the disk in the light blinks, it looks like his will load up then nothing else only a few clicking noises of him.

  On my computer, it won't even explore or anything like that. Do not get no error nothing. just the blue round slider (loading I think) and then nothing

  Help, please
  Im hoping it to be a simple fix or wire drop sumthing.

  You should try to clean the lens of DVD - ROM with cleaning disc. Probably, there is dust on the lens, and the disc can not be played...

• Satellite L300-1CU-DVD-rom drive does not work in Win7

  Hello

  I have IMPROVED MY TOSHIBA Satellite L300-1CU FOR WIN 7 NOW cd rom (MAST * one UJ880AS DVD RAM) quit working. DRIVE USED DOOR OPEN WHEN I CLICK ON THE DRIVE IN EXPLORER (DVD RW drive (D :)) MESSAGE SAYS "PLEASE INSERT a DISK INTO DRIVE D:" what I'VE DONE.))

  I DELETE THE UPPER & LOWER EDITORS IN THE REGISTRY AND UNINSTALLED THE DRIVER DVD AND STARTED RE! NOTHING HAS WORKED, PLEASE COULD YOU HELP?

  SO THAT THE UPGRADE OF THE SYSTEM OF THE UNITED NATIONS INSTALLED TO VARIOUS PROGRAMS OF TOSHIBA... !

  Did you upgrade using the Toshiba upgrade kit or you installed Win7 clean and clean installation?
  Can you confirm that the optical disc drive works well with factory settings (Vista preinstalled original)?

• Satellite Pro A60 DVD ROM (Mat * a UJ - 811 t) error Code 39

  I receive an error Code 39 message in the properties of the material for this device
  This code indicates the drivers are missing or damaged.

  Tried the drivers on Matsu * a Panasonic site - that refer you to the OEM Toshiba.

  Cannot find drivers anywhere on the Toshiba site or the forum search.

  Grateful for any help.

  This;

  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Restart again

  Good bye