Satellite 5200 - Touchpad scrolling in Opera / Touchpad backlighting

Hello.

Recently downloaded the Opera browser & find scrolling Synaptics stopped working!
All other functions seem good & scrolling is always fine with MS Explorer
Can someone tell me if this can be fixed?
[Using a Satellite 5200-902]

Also Touchpad light turns off after 5 seconds. [This is normal]
Does anyone know if it is possible to find the code and change it to say 60 seconds?

Any help on the above would be appreciated
Thank you

I m not sure but I think that Opera explore doesn t support this option.

But if opera supports this option, then perhaps, you must activate only in the opera settings?
But sorry I n t use Solution Explorer and so I can't give you a statement exactly hoe to do.

But play around with the settings or visit some sites support Opera

Tags: Toshiba

Similar Questions

  • Satellite 5200: Question on TouchPad scroll function

    My Satellite 5200 Series has a scroll wheel PHYSICS to the title of the two touchpad buttons 'the mouse'. I found a useful feature heavily but cannot find all the current models that have preserved it.

    It was rejected?

    Is there another way to scroll with newer machines?

    I would rather not add an external mouse because it blocks a precious USB port AND I actually use my laptop outside on my KNEES.

    Hi Tatterdemalion,

    Most modern laptops using a touch pad have a scrolling function software (which can be disabled if you wish) to control automatic scrolling. This is very useful for navigation text in Word documents or web pages etc., the technique (when enabled) is to set the top left or right of the touchpad to 'activate' and by touching this area temporarily, it will change the pointer of the foam to indicate the auto scroll option. Then only, drag the pointer slightly down and the screen starts to scroll until you tap the key again.

    A manual scroll mechanism is also available and can be used simply by stroking the right side of the touchpad (down to scroll down and up to scroll to the top) and the bottom of the touchpad to scroll left and right.

    I find these features useful, but I know other people who find them extremely irritating. It is useful to check.

    Kind regards

  • Satellite A350 - Touchpad does not work, but an external mouse works

    Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

    I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

    What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

    Thank you, and sorry for my bad English. :-(

    Hello!

    The touchpad does appear in Device Manager or you have here yellow exclamation points?

    Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
    Did you check that?

    In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • Satellite L655 - Touchpad not responding

    My Toshiba Satellite L655 touchpad no longer works.

    When I open the properties of the mouse > device settings, there is no entries in the devices section.

    Pointers?

    Hello

    Maybe you need to update/reinstall the driver from the touchpad again if the suggestion posted by Akuma didn t help.

    Maybe there is something wrong with the software/driver for the touchpad, so it of certainly worth a try

  • Satellite 5200 701: which cable should I connect to PJ2 port on motherboard

    Hello world.

    Currently, I am trying to fix a laptop Satellite 5200 701. The keyboard and touchpad are both dead but see the place in the Device Manager.

    When I opened the folder, I found the motherboard has an empty on port marked PJ2.
    When I looked in to it that I discovered that this is a port to connect a cable that feeds power to the keyboard, so I think that's the problem.

    My problem is trying to find out what wire should be connected to it and what another port.

    If someone could help, I would be grateful.
    Thank you very much.

    Hello

    How can you come to the idea that the keyboard needs some extra internal powersupply? The keyboard has only one connector that is important, and this is the connector of the KEYBOARD. Only this and nothing else.
    If there is an empty port then it has nothing to do an extra wire must be connected or whatever.

    Another thing: If the keyboard and touchpad appear in Device Manager then why they do not work? Didn t you think a software framework could be the problem? Please try another operating system, a linux live CD might be a good choice to make sure that the keyboard and the touchpad are really not work.

    Simply reconnect the keyboard and then try a linux live CD (knoppix would be a good choice, but you can also try ubuntu) to check if it work s.

    Welcome them

  • Remove the satellite 5200-902-word of past BIOS

    Just turn on the computer laptop Satellite 5200-902 Harman Kardon hangs on the Toshiba screen and asks me the password I never set.
    I can't boot from any external device. In the little LCD Panel under the touchpad, I see the prompt for the password after three incorrect attempts, turned off the laptop.

    You kindly help me?

    BIOS password can be set only. If you don't set it maybe someone else did it for you make problems. BIOS password can be removed by Toshiba authorized personal only.
    You must also understand that BIOS password is very important security feature and how to remove it isn't for the public forum.

    I hope you agree with me.

  • Satellite 5200-903d: unable to burn DVDs

    Hi, I have a satellite 5200-903d winxp sp2, and now when I insert a blank dvd, it appears like a full cdrom. Iused to use drag / drop and dvdshrink/nero with no problems. now, it seems to go through the motions of burning, but still left with a blank dvd. any help will be appreciated.
    regards bob

    [Edited by: admin December 17 05 08:54]

    Hello

    In my opinion, your DVD player is faulty. The position of the laser for reading and writing is not the same. It will be interesting to find out, you can watch DVD movies and if all DVD media can be read correctly. Try to remove the drive from Device Manager. Let the operating system detects the drive again and test it.

    I put t think you can do something.

  • Satellite 5200-801 - arrangement of keys

    I have laptop satellite 5200 801 with reinstalled Windows Xp Pro. The operating system has been installed not support which was sold with my laptop, but separately CD. Now, I installed all the drivers. Everything works fine, except the keyboard.

    On my computer laptop keyboard keys @ and "are not on the same premises as in other keyboards. @ key is not between shift + 1 and shift + 3. But this is close the Enter key. So which keyboard to choose to use these keyboard shortcuts, as it is written on a keyboard? Now, I have English United States... Or maybe I need additional drivers or any application, where I can change the assignment of the keys?

    I will be judging for all your advice and assistance.

    Try again with British English.

  • Question on the LCD Inverter for Satellite 5200-902

    Hello!

    I would like you (if possible) to inform me about the voltage characteristics of input/output of the inverter LCD to my laptop computer Satellite 5200-902.
    I need to check if the backlight bulb is powered correctly, because there is no backlight.

    Parts of my ups codes/numbers are:
    G71C00011121
    HBL-0284
    K1278365
    which seems to me meet the Toshiba part numbers P000354880. Please inform me concerning my inverter Toshiba part number, I found on the internet also the P000439470, with code G71C00011221, which is supposed to be the replacement of the P000354880 (G71C00011121).
    I also found the G71C00011121 but with different codes concerning the HBL-xxxx and 12xxxxx. Is this a problem or are all compatible with my laptop LCD G71C00011121 (SHARP LQ150U1LA03 P000374340)

    So, could you give me the following information:
    1. the characteristics of voltage input/output of the inverter LCD (HBL-0284, G71C00011121, K1278365)
    2. If the P000354880 is the part number for my ups.
    3. If the P000439470 has replaced the P000354880 and has an identical output.
    4. If the codes HBL-xxxx and? Â? 12xxxxx G71C00011121 of significance in the case where I have to replace my inverter.

    Thanks in advance for your help and for your time!

    Hello Andrew

    I'm really interested if anyone here can give you the info. Don't forget this is the forum of users and if you wait until the Info for Toshiba technicians you can wait a long time.
    It will be better for you to contact the service authorized in your country. If anyone has this info and access to the database of Toshiba need Toshiba service.

    Bye and good luck!

  • Dysfunction of graphics on a Satellite 5200 801

    I have a Toshiba Satellite 5200-801 (nr.PS 520-31P1D-PT) with the following problem:

    After pressing the button operation, the screen shows vertical stripes, alternately, with large rectangle B & W points. After Windows XP spit and the only thing I can do, it's a hard reboot again and again once.

    It happened all of a sudden without any specific reason a few days ago, and now I never finished a full boot sequence Windows normal.

    I read another discussion here in this forum, and I guess that the problem should be on the graphical circuit inside the motherboard. Do you think this could be a malfunction of this series from Toshiba?
    I try to call today for the phone number of European support, but after 15 minutes of waiting I hang it up.

    Here in Lisbon (Portugal), I have no idea how to solve this problem.

    Could all those who have already opened this model, you tell me if the graphic chipsset could be changed? (This is perhaps a silly question :-(sorry on this subject)

    Thank you very much for other ideas solving this dysfunction,
    Luis Pitta (from Lisbon)

    Hi Luis

    He damage of s to hear that I agree with you it could be a graphics card but I put t think it is of a common malfunction of this series laptop.
    You know, these defects occur just my laptop another production was fixed 2 times due to the fault of the sound card
    I think laptops are more affected by various malfunctions due to the temperature inside the laptop. The devices together produce a lot of heat and after several times the chip can damage all simply.

    It seems that you don't have much experience with this replacement and so I don't t recommend trying to fix it yourself. Firstly the replacement of the devices isn't easy as on the desktop PC and second you don t have the right parts.
    The technicians of the partner of service authorized in your country have more experience as a common user like me and you.
    Guys should check the laptop

  • Satellite 5200: lines on the screen - driver does not properly

    Laptop: Satellite 5200 702

    A few days ago, my laptop screen went all funny lines, came to the screen in a form of flickering green, the laptop froze and then the driver failed. The funcitons still mobile but I have these lines always start the toshiba XP loading screen system, so I know it will be a hardware problem. I have attached an external monitor to confirm that this is not a screen problem.

    Sometimes I turn on the laptop and the screen will be fine and loaded drivers, but that only lasts for about 2 minutes then XP lock ip, blue screens and reboots. Then once it to load with the dirver does everything wrong.

    I took the flat laptop cleaned and looked for something sensitive which could be causing it? I have not changed or verified the memory of the laptop, if it's an idea to do?

    Any suggestions?

    Hello

    This really looks like to me a graphics card failure. What do you think?
    Have you tried recovery of the operating system with the recovery CD Toshiba delivered? If this is not the case, try to install the OS from CD. Then you can be sure that the issue is not relegated to a malfunction of the software (driver) to 100%.

    But generally, I don t think you can fix it yourself. I m not sure if the graphics card may be withdrawn or entire motherboard but if it s a bad hardware work if the part needs to be replaced.
    If you have no significant experience in the laptop repair, then you should ask a technician for help.

  • Bad video memory - Satellite 5200

    I have a scrambled on display problem
    a Toshiba Satellite 5200. The adapter is
    NVIDIA GeForce4 460 Go, 64 MB, integrated
    RAMDAC. A test of Micro-Scope shows a bad
    video memory. How to solve the problem
    (change the video, or only video memory card
    or is it possible to exclude a damaged part
    video memory)?

    Thank you.

    Hello

    I read about this diagnostic software and it seems that this software is operating system independent, which allows the program to directly access hardware, bypassing the DOS or Windows, for faster and more accurate troubleshooting.
    But nevertheless, I recommend you to ask for help ASP. It may also start a diagnostic test and can give you an appropriate response.

    By the way: it of not possible to replace a graphics memory or graphics card.
    The graphics card is a small chip that attaches to the motherboard. In this case, you will need to change the motherboard. Well, but before you start to replace whatever it is ask for a care service

  • How to change the boot on Satellite 5200 sequence

    Hey, I've got laptop - Satellite 5200 901 and I would like to reinstall OS but I don't know how to operate the cd boot, always laptop run the operating system from the HARD drive.
    I would like to change boot on a CD and I don't know how to change it.
    I tried the keys F1 to F12 and I can't start the configuration of the BIOS.

    Please help me with this.

    Please try pressing the C button at the beginning upward. It will require your laptop to use CD/DVD-ROM as first boot device.

    Are you using the original recovery CD for the installation of the OS?

  • Logitech headset 30 and Satellite 5200 903

    Hello
    I want to use a headphone logitech usb30, but it does not work with the Satellite 5200 903. What can I do? The operating system is Windows XP with SP2. When I connect the headset with a usb port, it does not work.
    Thanks for any response or tip

    Hello

    I don't know if there is a software that must be installed, but you need to check all the device sounds and Audio properties. Please also check the Volume control there mute option enabled.

    The volume control on the front of your laptop should also not be set at the minimum level.

  • Satellite 5200 903: problems with Fn + F5 and button Middle YPP

    Hello
    I updated my Win XP Home for Win XP Pro and installed all the goodies of toshiba from the home page. Two things do not work as expected if:
    * Fn + F5 is not scroll the screens available
    * The YPP middle button cannot be used as a middle mouse button

    Don't know why Fn + F5 does not work, all other Fn keys work as expected. They show the OSD, too. FN + F5 does not display the OSD menu and no service :/

    The YPP button: I tried the driver on the site of toshiba and synpatics.com
    The problem is: in Control Panel, I can choose functions to each button. The "middle button" function is available for the left and the right key, but not the middle. And it is not recognized as button in the Middle, but like PageUp.

    Any ideas? The laptop is a Satellite 5200 903.

    Thanks for your help.

    Ataraxis

    Post edited by: ataraxis

    Hello Ataraxis

    First of all I must tell you that the Satellite 5200 is a great unit. If I found one that doesn't cost a lot of money, I will buy it.

    For your questions:

    As far as I know if you want to use the FN + F5 key combination you must install TOSHIBA Hotkey Utility for Display Devices V2.1.0.0 - 1. I hope that this tool is installed correctly. If you want you can try to install again.

    I'm not 100% sure but I think that this little button in the Middle does not have the same function as mouse button of the medium, as a dial and it will be used to start the Launcher of sPad. If you want you can check it in s. manuals I've read n t, but I hope you can find a good explanation about the features of this little button.

    Good luck!

Maybe you are looking for