Satellite 5205-S505 - how to install the new OS after replacing HARD drive

Similar Questions

• Satellite 5205-S505 - how to remove the battery with the damaged battery latch?

  I try to set aside my laptop (satellite 5205-s505) today. But I found that the release latch was damaged somehow. What can I do?

  My seriously damaged lcd. I have method to close the LCD to save energy (just use external moniter)?

  This battery is a very good question. I think you're the first person who asked it.
  If you cannot remove the only way is, I think, to disassemble the entire laptop and somehow free battery.

  When you use the external monitor, you have to use the FN + F5 key combination and switch to an external monitor only. Portable computer's LCD will be OFF.
  You can also check the Advanced display settings. Usually, you can also find settings to define where should be the office.
  Check it out!

• Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

  I had a HARD drive error.

  So I formatted the hard drive (after trying for months to get the process to finally finish that)
  Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

  I searched the net and found nothing of use!
  Help, please

  see you soon
  Nick

  Hello

  You need to create the own recovery in the past disc!
  This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

  In case you have not created this disk, it is possible to order this support:
  http://backupmedia.Toshiba.EU/landing.aspx

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.

• How to install the items 11 without a hard drive

  Help, I bought photoshop elements 11 and no disc in my laptop drive, they told me at the store I was able to install it with just the serial number?

  Download the trial version and activate it with your serial number.

  Mylenium

• How to install a newer version of a wlan driver?

  Hello everyone. I am a novice with computers and I need to know how to install a new version of a wlan driver since I received in my circular i should put to update the driver and I followed the instructions in the message and I did download the driver but still missing the installation because so far the old version of the wlan He is still there and I still receivin the message saying that I should change the driver to the latest version. As I don't know enough about it, I'm afraid to uninstall the old version, because I am not shure if I would be able to install a new and I need a driver wireless function. Thanks for any help on this

  Hello

  1. what operating system is installed on the computer?
  2. What is the brand and model of the computer?
  3. have you downloaded the driver from the manufacturer's Web site?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I suggest you make sure that you have downloaded the latest driver on the manufacturer's Web site. After you get the driver file, you can use the steps in the sectiondownload and update a driver yourself and check if that helps you install the driver correctly.

  I hope this helps.

• How can I reinstall the CC without having to start a new account after a hard drive change?

  How can I reinstall the CC without having to start a new account after a hard drive change?

  Just got my PC back from repair with a new drive installed and al, I see for the CC options for new accounts to create, I already have one so I want to reinstall my account without having to pay for a new account.  Can someone tell me how to do it please?

  Hello

  Please visit the given link to download CC: download and install Adobe Creative Cloud applications

  * Connect with your Adobe on which you have registered the product ID.

  Concerning

  Bianka Attre

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• How to solve the problem of having a hard drive of the unknown?

  I have just installed a new western digital internal hard drive for my toshiba. The problem is that my computer called the unknown hard disk and also need of a digital signature. How can I fix these problems?

  You must follow the instructions provided with your hard drive.  This would involve the creation of a partition and format.  If you have a Windows 7 installation disk, you can boot from it and simply follow the instructions on the screen.  However, you need to get the drivers you need from Toshiba.  If you can get the discs to restore the factory settings, this would be ideal because that would include drivers AND software pre-installed.  This includes free software from Toshiba.  On my Toshiba Satellite L755 I bought in December, it came with instructions to create these discs.  If you did, you're all set.  If you do not, well see what you can get from Toshiba.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• How to install the new HDD on Satellite M70?

  Hi, I have a Satellite M70 PSM75E, I want to move a hard drive of 250 GB, can give me instructions how to install and what type of disk HARD inface do I go?
  Your help is appreciated

  Hello

  It is difficult to say if the 500 GB will work in this good old classic... I think that 250GB should be sufficient for all applications you want to install.

  However, you could try the 500 GB. If it doesn t work you can bring back to your computer store or you can test it directly in the shop. Then you'll know if it of an option for you or not. Be creative! ;)

• I use two different versions of Firefox for two different employers - how to install the new version without losing an old?

  An employer requires that I use Firefox 3. The other requires that I use the most recent version. How to install a new version of Firefox to another path without overwriting the old version?

  The best way to have a version be an installation of Firefox Portable. The mobile facility is autonomous and will not affect your installation of Firefox "ordinary".
  
  http://PortableApps.com/apps/Internet/firefox_portable

  Otherwise, you will need to set up a profile specifically for version 2 and make sure the correct profile is launched in each version.
  
  http://support.Mozilla.com/en-us/KB/managing+profiles
  
  http://KB.mozillazine.org/Shortcut_to_a_specific_profile

  Overall, you are probably best to replace your current version of Firefox 3.6.25 with Portable Apps - http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 - version and install Firefox 9.0.1 that your installation "regular".

• Satellite L10-209 - how to install the display driver for Windows 7?

  I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD

  How to install the display driver (graphics card)?
  Tools & Utilities CD does not work with Win7,

  Hello

  I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

  Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
  http://www.Intel.com

  Check this box!

• HP Touchpad ~ how to install the new battery?

  How to install a new battery for my dead touchpad? Finally an I tried to open and ended up breaking a bunch of clips and buttons.

  The TouchPad does not have a device that is not repairable.  However, Google is your friend and comes to success like this, which includes a link to a repair of third-party 'guide '.