Satellite 5205-s705: IDE #0 ERROR at startup

Similar Questions

• Satellite Pro A10 - IDE 1 # error at startup to the top

  HI, I have a Satellite pro A10 and everything is working very well in recent years to date.
  A few days ago I started having a cd read error / invalid dvd disc format still drives fine on all the other PCs work.

  Today as I get #1 error on boot up IDE... the laptop is always standard when I got off the shelf. thinking the drive might be dead due to wear I replaced the drive with a drive to work and I still get the same error. I removed the completely STRANGE and yet to come.

  I also updated the usb floppy bios that has been a success. and the best part of all this. the dvd - rom supplied with the laptop works fine in my other a10 tosh!

  Someone at - it ideas. I really need to replace the motherboard if I can help it. This is the only problem with the laptop.

  THX in advance people.

  Hello James

  IDE 1 # error is typical when ODD is not accepted by the system. The reason may be defective drive or the use of non-compliant readers. The fact is that each player can not be used with all portable models because of the allocation of the different pins.

  In your case, it is really strange that the work by car on other A10 but not on this one. Because of this, I presume that there may be a problem with connectors. I'm afraid there is not much to do. You can try to check out them and see if they are clean and not oxidized.

  Sorry, but we cannot speculate what may be the problem but, as you know, only intensive test may give you more answers.

  Good luck and let us know if you will find what is the problem of resources.

• Satellite A40-SP151 - ide #1 error on non-existent drive.

  OK, I got a laptop Satellite A40-sp151; 3 months ago we sent it to repair and they have damaged the connector of the cd player.
  If we use it without the cd unit.

  It was fine, but yesterday I received an error ide #1, without apparent reason.
  The worst is that said error won't start the computer as it will freeze.

  Hello

  The ide #1 error means that the BIOS does not recognize the device that is connected to the #1 controller.
  Especially the HARD drive is connected to the controller of #0 and the CD/DVD drive is connected to the #1 controller.

  In your case, it seems that the CD/DVD drive is bad and that is why this error.

  Welcome them

• Satellite A40-141 - IDE #1 error after the insertion of a new CD/DVD drive

  Hey there!

  I have a laptop Toshiba Satellite A40 - 141 series.
  I have built in a new dvd driver and after I restarted my laptop

  I get the message IDE # 1 and I can't use the driver. I read in some forums that I probably need to update my bios. Now, here's the problem. I can only update version 1.5 for my laptop.

  I tried that and get the message that I already have version 1.5. I can't find an another update of bios for the A40 series except the 1.5 which is since 2004.

  Can anyone help please?

  Sorry for the long talk and bad English :-)
  Thank you

  Hello

  You are completely wrong boyfriend.
  This problem will be resolved not the BIOS updates!

  You bought the car just not compatible.
  The IDE #1 error means that the device connected to the IDE 1 controller was not recognized. Why? Because of the wrong master/slave/C-salt settings!

  Slim portable settings are controlled by the firmware and cannot be changed as weird for desktop PC.

  Either you contact the manufacturing of the CD/DVD drive and will require an update of the firmware and how to change these settings or you need to purchase a new compatible RATING

  Good bye

• Satellite Pro A10: IDE #1 error - drive doesn't appear unless the CD is inserted

  Hello

  I've been recently wearing on my bed watching a DVD when I fell asleep with the laptop sitting next me on my bed. During the night, however I moved and he accidentally knocked on the side of my bed.
  The next day when I booted up the loading it said IDE #1 error since then I understand it is a mistake to CD/DVD drive, the device works very well, starts ok (except the IDE error) and I can use it as usual except that there is no DVD drive in 'My computer', which is a bit of a pain when I want to watch a movie/play a game or install something.

  The drive itself is completely insensitive, when I press the button to eject the tray, it doesn't do a thing.
  I decided to try to remove and put back the drive to see if it was struck just loose when he fell of the bed as he fell only in short way (approximately down to 18 ".)

  I removed all the covers on the bottom of the laptop and checked that all was in place correctly and to try to understand how to remove the drive but would not do too adventurous as to worsen the situation, the only thing I have done is to remove the CPU fan and remove a few stuffed animals and remove the HARD drive and glanced to make sure it was not damaged in any place) It wasn't) and then replaced and replace all covers.

  When I rebooted the system, it started fine as usual, and the player react when I press the eject button, but the DVD player (sometimes) will now appear in 'My computer', but only when I insert something (be it a DVD/game/program), then it displays the error message an error of e/s on the device there.

  Any help of you all would be a great help, I thought just remove the drive and replacing it with a new one as a DVD RW one but I do not know how, I would be very grateful for advice and guidance you could provide.

  Thank you very much
  Michael

  Hi Michael,

  It is possible that the relocation of your optical drive may be necessary to refer it to the full. Unfortunately on the A10, it will be dismantled in order to achieve its screws located under the keyboard.

  Please see the following link for the complete disassembly instructions. The DVD player is covered in step 13. http://www.irisvista.com/tech/laptops/ToshibaA15/SatelliteA15_laptop_disassembly_1.htm

  concerning

• Satellite 2450-101-ide #0 error appears

  Hello

  I've been everywhere looking for an answer to my perhaps problem you guys here can help me. Im getting an ide #0 error when I start my laptop, essentially the original hard drive has become defective, I had to keep reinstalling windows on it because that recognize all a udden, it would just not my operating system.

  Anyway, I recently bought a new hard drive and it was all works very well for about a week, then all of a sudden I turn on the laptop and no hard drive is detected at all and all I get is "error ide #0", I checked in the bios and its not reading the hard drive at all.

  had no idea what that means or what he should do about it here, can anyone help me or point me in the right direction?

  Thank you

  After a few exstensive read on this forum, I think it may have something to do with the size and the hard drive, it is a 120 GB fujitsu CA0653-B042, I feel that maybe it is not compatible or even great!

  so... My question is if it's not compatible is it still possible to make it work in the first place, as this was very much a week?

  Post edited by: Abracadabra

  Hello

  This very mysterious case as you have already said the IDE #0 error is displayed because the BIOS can not recognize the HARD drive than claire.
  But usually the BIOS should not recognize the HARD drive the first time because of the size of the HARD drive, it's strange why the HARD drive worked for a week

  Anyway, in my opinion the 120 GB seems to be too big and so you should try another size maybe 60GB

  PS: Have you tried to change the jumper on the HARD drive to another position?

• Satellite 2450-401: "IDE 1 ERROR" after installing the new NEC AD - 7543A thin disk

  I have a Toshiba 2450-401 and I buy a slim NEC AD - 7543A labelflash drive.
  When a reboot my Toshiba raise an error: "IDE 1 error".
  This is a message of incompatible equipment? There is a solution for this error?
  How can I solve this?

  Hello

  What to say dudea? ¦a? ... seems you have made a big mistake and purchased a bad CD/DVD drive.
  This error message is only displayed if the drive supports bad master\slave or c - salt settings!

  You should know that not all readers are compatible and can be used in the laptop!
  AFAIK the operating manual provides information on some readers supported!

  But if you na? t know this drive is compatible, try to contact the service provider allowed in your country and order the support one new!

  Good luck

• New DVD - RW double layer burner on Satellite 2450-S203 (IDE 1 # ERROR)

  Hi all

  I have a toshiba 2450 S203.
  For this laptop, I bought a new writer NEC ND-6650 double layer DVD.
  I took out the orginal, unscrewed the chassis power off and place it on the new. Insert the new DVD burner in my computer, the led starts too burn. Insert a cd in there and nothing happened. Looked in my computer and the DVD player was not shown. Restart my computer and I got an erro: IDE 1 # ERROR. Can someone help me with this problem.

  Thanks in advance,

  Daniel

  Hello Niko

  Is it possible to make it work properly? My Tecra M1 has a CD burner. I wish I had a DVD burner inside.

  Thank you.

• Satellite SA50-110 - IDE #1 error after the insertion of a new CD/DVD drive

  Hey there!

  I have a Toshiba Satellite SA50-110 portable psa50e.
  I have built in a new dvd driver and after I restarted my laptop

  I get the message IDE # 1 and I can't use the driver. I read in some forums that I probably need to update my bios. I do it. But the error continues.
  Can anyone help please?

  I am that all readers of optical discs aren't for each laptop model. The problem is: assignment of pins. Therefore, it is very important to use compatible hardware components.

  In my case the problem is compatibility.
  With the SA50-110 Satellite, what can I use?

  Sorry for the long talk and bad English :-)
  Thank you

  Help please

• Satellite A300 - CEC_MAIN. EXE error at startup

  Hello, I have a Toshiba Satellite A300 network and when I run Windows Vista and the error message is displayed. This error is cec_main.exe.

  I have remove the camera assistant software and restart the computer, restart when Windows the message not to apears. I have install the camera assistant software, and this error again.

  Does anyone have the solution?

  Hello

  The CEC_MAIN. EXE application belongs to the software of the camera, and if you have already tried to reinstall, you should check your firewall and security software.
  I think that your security software is blocking this application in order to check this!

  If it doesn't work remove the software and reboot the laptop. Use CCleaner to clean the system and reboot once again. After that, install the latest software for the Toshiba page.

  Welcome them

• Satellite A300-276 - nvraid.sys error at startup of Windows

  Good evening

  Recently, I am trying to install Windows 7 in my Satellite A300-276. I actually install but when I want to start it apears a message saying:
  "Unable to start Windows. A recent hardware or software change might be the cause. To fix (...) »

  and then, on the same page:
  'File:\Windows\system32\Drivers\nvraid.sys '.
  "Status: 0xc0000098.
  "Info: Windows could not load a critical system driver is missing or corrupt.

  Could someone help me with this?

  Thank you very much.

  Best regards

  André

  Hey,.

  You can start Windows in safe mode?

  In addition it might be interesting what you have installed or changed the software/driver. Perhaps restore the system to an earlier point might be useful.

  By the way: did you use a Microsoft Windows 7 disk?

• Satellite L450D - 13G - PXE - E61 error at startup

  This laptop has run chkdisc spontaneously started since I bought it 9 months ago, but now I crashes followed by inability to start or do anything. PXE - E61 media test failed. Its still under warranty so I will not do any DIY material. Anyone know what it is or if I should send it to Toshiba? His work at the minute, but it is to his death a bad.

  Hey Ironman,

  I found an interesting article on the site Web of Toshiba on this behavior and I think that it s useful to you:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• C satellite does not start successfully - error at startup

  Turned on laptop today and received the following message:

  + Reboot and select proper boot device or insert boot media in selected boot device and press a key.

  Don't back up drive made when buying any body got a solution for this?
  Thank you
  Bev

  Hi Bev

  Can you please tell us what model of laptop do you have?

  Enter the BIOS and set it to default settings.
  HARD drive recognized and listed correctly in the BIOS settings?

  After this try to start Notepad, and then press F12. Choose the HARD drive as a boot device and press ENTER. What happens when you do this?

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• IDE 1 # error with Panasonic UJ - 820B in PS210E Satellite Pro 2100

  Hello
  I am a newbee on this forum. Can someone help me with the following problem?

  I try to install a Panasonic UJ - 820 B CD/DVD drive in my Toshiba SP2100 Pro PS210E - 003 DM - Satellite of THE.
  It fits perfect, but... my give me bios ide 1 # error. My bios is 1.40 and I can't find an update.
  I can't even find the master/slave switches

  DOE - anyone have a solution for this problem?

  thnx

  What to say? With short words: you try to use ODD not compatible. The assignment of pins is the same and the STRANGE may not be recognized correctly.

  Sorry but I don't have a solution for this laptop more old. Maybe partner allowed in your country can provide you with more information.

  By the way: are looking for a little to this forum. Somewhere I read about bypassing these two pins of connection (something about the PIN 45 and 47). I remember no more.