Satellite A 200 will not be stopped correctly

Similar Questions

• My Aero notebook will not be stopped correctly, no more. Can you help me resolve this you problem?

  My Aero notebook will not be stopped correctly more and when I turn it on it said "it was not shut down properly.  Can you help me resolve this you problem?

  It runs on Microsoft Windows 7.
  I got messages saying something on a certificate.
  At the bottom I selected the hardware and the drivers, but I don't know if that's the problem.
  Hello
   
  
  1. you receive an error message/code? If Yes, what is the exact full error message?
  2 have you made changes on the computer before this problem?
  3 does take more time to shut down the computer?
   
  
  Follow the steps.
   
  
  Method 1
  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
   
  
  Method 2
  Run the fix since the articles and if it helps.
  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/975777
  You can't do a computer that runs Windows 7 stops or sleep
  http://support.Microsoft.com/kb/977307
   
  Run a virus with Microsoft Safety scanner scan and check if the computer is infected.
  Method 3: Microsoft Security Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  You can also download & run Microsoft Security Essentials on your computer.
  See the link: http://windows.microsoft.com/en-US/windows/products/security-essentials
   
  Response with more information to help you.

• HD DVD on the Satellite X 200 - will not play with vista 64-bit

  I installed vista 64 bit on my x 200, thought I had everything working, but when I went to install the Toshiba HD DVD software, I get a message saying: it cannot be installed on this computer. I tried some third party decoders, and none of them has managed to read HD DVD!

  All ideas

  See you soon

  Jim

  As already said and mentioned by Sandors Toshiba software which can be downloaded from the Toshiba page supports only the 32-bit version of Windows.
  You cannot install it on 64 bit OS.

  In addition, the HD DVD drive that is published on the page is only the updated version.
  You will need the Toshiba HD DVD player, which is part of the image of Toshiba, if you want to install the update of the page.

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Windows 7 Home Edition Premium will not be stopped

  I have a Samsung R510 laptop running a processor Intel Core 2 Duo with 4 GB of ram. I installed Windows 7 Home Premium and now find that the laptop will not be stopped. Sometimes the "Disconnect" message and nothing else happens and sometimes the "Shutting Down" message is displayed and again, nothing else happens. I pressed the power button to turn off the machine. It was a clean install and at the present time, there is no other software installed yet. Please help for the moment I think re - install Vista and deduct £70 has passed on 7

  How your question is related to Windows Update (compared to the Windows upgrade)?

  Try posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Win XP will not be stopped

  All of a sudden when I turn off my computer that is running Windows XP, my computer will not be stopped. I'm under win xp on two other computers, and I don't have this problem. Is there any solution for this?

  Download this reg file and merge... https://DL.dropboxusercontent.com/u/31372342/FastShutdown.reg
  Reset the computer and try to stop. Is the problem still there.
  The user profile hive cleanup service could help. http://www.Microsoft.com/en-US/Download/details.aspx?ID=6676

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• I am trying to install a D-Link router, but it will not designate the correct IP address.

  Im trying to install a d-link router and it will not get the correct ip address. I then tested on my roommates with a newer version of windows laptop and the router has worked. d-link technology says I may new new setting lan drivers installed for this problem. help someone?

  original title: router problems

  Make sure that this adapter you set obtain IP and DNS addresses automatically.  Go to your network connections and right click on your internet connection and select 'Properties', then click on (highlighted) Protocol Internet (TCP/IP) and then click on the properties button and make sure that the IP address and DNS are both set to obtain automatically addresses.

  Go to the Services management console (type services.msc in the box run from the start menu) and make sure that the DHCP Client service is set to automatic startup.  Restart the computer and see if things improve.

  John

• My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  Hi Harry,.

  · What happens when you try to stop?

  · You receive an error message or error code?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  You can check the link below: Windows XP Shut Down and auto-restart issues: http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• Windows will not work stopped... it crashes with just a mouse pointer and the blue screen.

  Windows will not be stopped.  Laptop crashes with blue screen and a mouse pointer.  This laptop has XP Professional SP3.

  Look in the event log to see if any errors are recorded.  Install the Service Profile Hive Cleanup (UPHClean) Microsoft and see if things improve.  See here for more information:

  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based:

  http://support.Microsoft.com/kb/837115

  John

• Videos in my card sd will not be imported correctly

  Hello, I tried to import videos from my sd card on my laptop and some of them will not be imported correctly. When I say it will not be imported correctly I average it says it imported, but when I click on the video screen is black and you can hear the sound in the video. Most of them imported fine but four have not up to now why is this and how to fix this? If anyone knows please tell me thanks!

  camera: sony alpha a5000

  I can view fine on the camera.

  My camera will not record anything without the sd card if it also helps.

  SD card: perfomance elite pny 16 GB

  Laptop: toshiba which has windows 8

  Sorry I don't know the model

  Dayana Hello,

   

  Thanks for posting in the Microsoft Community. I understand that you are unable to play the videos that you have imported from an SD card.

  To help you better, please answer a few questions.
  1. what player you use to play the file?
  2. What is the file format of the video files which you can't play?
  3 have you tried to play with different media player?
   

  If you use Windows Media Player, you can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992/en-us

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player can not read the
  file.
   
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8
   
  If the file format is supported, you can try the following and see if it helps.
  Method 1:
  Run the troubleshooting in the Windows Media Player library.
  (a) press Windows + C set, click Search, and then click settings and then in the search box, type Troubleshooting.
  (b) click on programs.
  (c) then run convenience store to Windows media player library.
  
  Method 2:
  1. in order to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties.
  On the file tab, look at the sections of video codec and Audio codec.
  2 download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download Codecs player
  3. configure the protocol settings on the Tools menu, click Options, and then click the network tab. In the Streaming protocols area, select all the check boxes Protocol. When connecting to a server running Windows Media Services, Windows Media Player tries to use all selected protocols.
   
  Hope the helps of information. Let us know if you need help with Windows related issues.
   
  Thank you.

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Satellite A200-1UQ will not be on the way, power supply cable LED flashing

  Hello

  My A - 200 satellite 1UQ turns off suddenly when you are connected to the power. Now, he will not be in service.
  When I plug the cable LED (blue) - power cable on the laptop flashes quickly with no difference in speed or make a pause between flashes (so a balanced pace).
  I tried removing the battery and tried another adapter and power cable.

  So my question is: what does the flashing blue LED mean? And, possibly, what can I do to fix this?

  Thanks in advance,

  Matt Bloem

  Hello

  Check it please this Toshiba document as a first step and send a few comments - http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm