Satellite A - CD/DVD drive problems

Hi guys go crazy...

I have the following questions, trying to burn a cd or dvd. Sometimes I'm not recignise the disc as a blank disc ready for use, sometimes it burns then shows nothing on the disc, sometimes it burns more than one disk then fails, sometimes it works perfect...

Today for example, I put in a 6 discs tried to copy the data off hd then failed, 7th disc works fine. Then when I go into the program, he suddenly used recignise of blank discs, I'd caution saying cd/dvd inserted could not detect with success, there is no logic to it... several times I went in only ashampoo and it does never no cd burner device detected, never had this before... Sometimes I questions with him rarely find a dvd that I have to put a few times and then he found it.

Im not sure if its related, but I have this error came as well, or what it is - this related to?

Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6000.2.0.0.768.3
Locale ID: 3081

More information about the problem:
BCCode: d1
BCP1: 02DAA3C4
BCP2: 00000002
BCP3: 00000000
BCP4: 8AD7707C
OS version: 6_0_6000
Service Pack: 0_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini051209-02.dmp
C:\Users\Ryzie\AppData\Local\Temp\WER-81635-0.SysData.XML
C:\Users\Ryzie\AppData\Local\Temp\WER71B5.tmp.vers ion.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

I ran a cd cleaning through it no help... tried to diffΘrents cds and dvds without help, install windows from scratch twice and update some software, used software of different formatting and options.

I have restored the backup disk computer not better, I updated the package value drivers and silent dvd software. I tried to burn in Explorer, nero, shrink dvd, ashampoo buring etc etc... Still get mixed results.

Im not sure if it's a hardware problem or software, I've never had a problem with it reading true copy DVD, sometimes probs wih burned those but if I put it six times, it works.

Any ideas, im wasting a lot of CDs and DVDs with my failures...

Hello

Burning questions of CD or DVD are mainly related to a non compatible drive or finally it may be really a hardware problem (ODD).
But first, you should check some different discs from different manufacturers.

I had similar problems, but since I use the R TDK (CD and DVD), I have not noticed problems

PS: I use Nero too. in my opinion the best burning software

See you soon

Tags: Toshiba

Similar Questions

  • Satellite A100 CD/DVD drive problem

    Hello.. I can normally play any type of cd or dvd, the cd or the dvd turns just in the computer and it opens, when I restart the computer and put the disc in a straight line, after the cd/dvd will play... If I'm going to play another cd/dvd at a later date, I have to restart the entire procedure, by restarting the computer.

    There is no drivers on the computer... I see... However I download the latest version of itunes every time, which seems to cause the problem. In the past, it was ok, but now the problem is just constant.

    I don't know how to put this problem right.

    I hope this helps...

    Hi mate

    I agree with Alex.
    The itunes could affect the registry and change the filter settings.
    You could remove the filters manually.

    Register, choose the key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    He remove the Upperfilters and Lowerfilters values

  • Satellite 2430 DVD drive problem

    Hello
    My Satellite 2430 has had a strange DVD problem and may not know what is all about. All started when I tried to make a full recovery. The unit was not able to boot from the DVD. I checked the DVD player with different bootable disk, but still nothing. Unit won't boot from DVD drive even if you press F12 and peripheral DVD selected. Not to mention that the recovery DVDs is loaded normally in my desktop pc. Notepad starts Windows OK the HARD disk and, which is incredible, is that, inside Windows, everything is OK. The DVD player works like a dream. However, it is not enough to perform a full restore, as the recovery process cannot be initialized by Windows. A leap that the BIOS is at the origin of the problem, I've upgraded to version 1.6, but there is no change in the behavior of the DVD.
    Any thoughts, before using a big-big hammer?

    Hello

    Have you tried to change the boot priority in the BIOS?
    If this isn't the case, then first change the startup procedure to the CD player. The local network must be on the end.

  • Re: Cd/DVD drive problem - code error 39 on Satellite P series

    Hello

    It is my first request for assistance.
    My CD/DVD drive is most recognized, and when I go to Device Manager and click on CD/DVD I'm informed that the cdrom.sys file is there but cannot be loaded.

    An error number 39 is reported.
    Any advice would be greatly appreciated, but please keep things simple to the actions of a single line if possible.

    Of course, you can get a few tips ;)
    I think you might find faster if you are looking for first in the forum, but I'll try to help you too.

    He error code 39 is very common issue and can be resolved easily.
    See this MS knowledge base article:
    http://support.Microsoft.com/kb/314060/en-us

    So first of all remove the CD/DVD drive device manager.
    Then access the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Reboot the laptop and wait until the CD/DVD drive has been installed again.

    That s it. ;)

  • Satellite L40 - CD/DVD drive does not end to close after burning

    Hello

    My TOSHIBA SATELLITE L40 works correctly under VISTA HOME PREMIUM. This is the first time that I realize that the CD/DVD driver is unable to complete a session of engraving using NERO8, NERO9, ASHAMPO TSHIBA DISC CREATOR or in Windows mode. The burn starts fine from 0% to 100% where it remains for a long time. Where can be the problem come from? Is the driver broken only for burning?

    It correctly reads all CDs and DVDs once loaded.

    Thank you!
    [email protected]

    Hello

    I think that this problem can be caused by using fully compatible diskettes
    I had many problems with different CD or DVD from different manufacturers.
    I tested several brands and finally I had a good experience with TDK discs Verbatim R my disk manages this disc better than others

    Perhaps, you should also test different drives from different manufacturers.

  • Satellite C660 - 11K DVD drive does not

    I was just become acquainted with my new laptop Satellite C660 - 11K that I bought for Christmas and came to try playing a DVD for the first time tonight.

    The first one I tried was a business produced in format DVD RW DVD. When I inserted in the DVD player, I got a "Windows Media Player has encountered a problem during playback of the file" error message. Following the troubleshooting guide to check my sound, video settings and game controllers do not solve the problem.

    I then tried a purchased movie DVD (DVD-video format) and received the same error message.

    Finally, I have inserted an audio CD purchased and tried to play it through Windows Media Player and iTunes, but could not play all titles. The Gracenote software did, however, identify the CD and track names.

    By Device Manager, I found that my DVD drive is a TSSTcorp CDDVDW TS-L633C and that it is enabled, the value of region 2 DVD and it has drivers up to date.

    Am I missing something stupid that prevents me to get my DVD player to work, or do I have a defective DVD player?

    Any help or ideas greatly appreciated.

    Thank you.

    Hi mate

    Perhaps you need a firmware update for the CD/DVD drive.
    I found this Toshiba document:

    + ODD Firmware Update to fix problems with audio sound distortion on playback of the CD in Windows 7 +.
    http://APS2.toshiba-tro.de/KB0/TSB0502VV0000R01.htm

    Please check and if necessary, update the firmware!

  • Satellite 2430: CD/DVD drive does not work - i/o error

    Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
    F:\ is not accessible.
    The request could not be performed because of an i/o error.

    I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!

    Begging you a lot
    Michael Borger

    In my view BIOS update will not change.
    I assume that the reader has worked in the past with the same BIOS version
    It is a drive hardware problem or some registry keys are corrupt.

    I think that it s a hardware malfunction may be a matter of lenses.
    But try this;
    Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.

    Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
    The firmware should again loads.

    But if these procedures help t, I don t see it differently as for replace the drive

  • Satellite A210 CD/DVD drive disappeared

    I have laptop Satellite A210-12U (PSAEGE) and the CD/DVD drive has no advert for it.

    By ad, I mean its not listed via Start/computer, have only Vista (c), data (E :) listed there. I don't find in Device Manager or the other.

    Light on the CD/DVD tray lights up when starting and turns on when I place a DVD in the drawer, but nothing happens.

    Any solution?

    Post edited by: Bluesnapper

    Post edited by: Bluesnapper

    Hello

    To be honest, I don't understand. You are talking about the Cd/Dvd drive missing or Dvd Toshiba player?

    Anyway, try this:

    1. access to the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

    Reboot the laptop and wait for the CD/DVD drive would appear once again

    or

    2 go to the page of the Toshiba driver and download dvd player

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    Post edited by: Jeka-HE

  • Satellite Pro A210 DVD Drive not working no-error code 39

    Hi all

    My Satellite Pro A210 dvd player does not load.
    When I looked inside, he showed an error code 39.
    I tried uninstalling and reinstalling but it still doesn't work.

    Any ideas?

    Hello

    To my knowledge, the 39 error message appears if the CD/DVD drive is not visible in my computer.
    You can try this workaround:
    Go to Device Manager and remove the drive CD/DVD from the list of devices.
    Then go to the registry (regedit) and remove upper and lower key filters:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Then restart the device and test again
    I think this should help!

  • Satellite M40-CD/DVD drive disappeared

    My CD/DVD drive has disappeared from my COMPUTER and won't read any CD the CD alone, it will read is the recovery CD. It must be a software problem, but I don't know how to sort. Anyone have any ideas? It's out of warranty so back to toshiba will cost me a fortune!

    Can anyone help?

    Hello

    If the ODD is not shown in Windows Explorer, but listed in the Manager for devices with yellow symbol (!) Please do this http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 (method 1).

    Please let me know what happens after that.

  • Satellite L755 - CD/DVD drive does not

    I own Satellite L755 and the dvd rom does not work (do not read disks and show on the disks in the computer).

    When I go into the Device Manager in windows it displays error code: 39 which means that the driver is defective.

    It is not the first time its happening.
    It happens after a few months and I need to back up and do the system recovery each time.

    Is there a way to fix this without making the system recovery each time?

    Hello

    Try this workaround:

    Go to Device Manager and remove the CD/DVD drive entry (mark and press DELETE)

    Then start the registry and remove the filters above and below the following key:

    HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Control \Class------{4D36E965-E325-11CE-BFC1-08002BE10318}

    It may be useful

  • Satellite L350 - CD/DVD drive does not open

    I have a new laptop, less than a month, but his habit of CD/DVD tray open by pressing eject button. Eject-do a right-click on its icon does not open it no more.

    There is no disc inside, it is visible in the BIOS, no sign of a driver problem in Device Manager. I tried reinstalling the driver, but that didn't help.

    Any solution for this problem would be appreciated. Thank you.

    Hi inecro,

    If the CD/DVD drive doesn t open more I think that you can do anything in this case.

    I can only confirm what writes Akuma. You need to replace the CD/DVD drive and you get a new from an authorized service provider. If your laptop is under warranty you can get a new one for free.

    I had the same problem a few months ago. EPA has replaced the CD/DVD drive in a few days and I come back my laptop. Very fast service and the technicians are friendly. :)

  • Satellite U300 - CD/DVD drive cannot read disks

    My CD/DVD drive does not work.

    It can be heard at work (or maybe working), but it cannot read the discs - music films or niether. The 'properties', says the disk is full, but can not read the contents. Neither is it give details of the content.

    If I run iTunes or Real Player, suffice to say it is a blank disc in the drive and told me to get ready to burn to a disc. But in his own info says that the disc is full! Windows XP sees the drive in 'Properties' and said that it is complete, but does not display the contents of the disc. Devices, said the drive (type HL-DT-STDVDRAM GSA-U10N) "working properly".

    I have turned off the HDD (software protection movement) protection because he stirs a warning whenever the unit darn picked. I tried to use the drive with it on and outside. My computer is 18 months old (I think), but this problem has existed for a year and gets more and more frustrating.

    Help please.

    Hello

    You can find enough son here in the forum about problem of CD/DVD disc then please use the search function of the forum first.

    I founded an interesting thread for you you need to check:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162032

  • Portege 4000 CD/DVD drive problems

    Afternoon,

    Someone at - he experienced problems with the CD/DVD drive on the failure of 4000? If so, had any luck by encouraging working again?

    Thank you

    Andy.

    Hello

    If there is no way to make it work again try to use the System Restore tool or preinstall OS using the recovery CD. After that it should work fine again except there are a few hardware malfunction.

    Good bye

  • Re: Satellite L650-11F, DVD drive disappeared Windows 7 after that BIOS installed

    Hello

    I would like to ask for help about this problem:

    Today one of the programs from TOSHIBA, that came with my laptop (L650-11F), warned me about an update of the BIOS (v1.80) after download and install my DVD drive disappeared from Win7 and it has a continuous yellow light on it. It does not even open when I press the eject button.

    I have however maybe install the old version 1.60 back would help, but TOSHIBA does not keep older drivers version apparently.

    Any help would be greatly appreciated.

    Hello!

    Restart your computer. During the startup, at the beginning, press the F2 key to enter the BIOS Setup. In the configuration, press F10 to restore all the default BIOS settings. Save the changes and exit.

    Post here if your problem solved.

    Kind regards.

Maybe you are looking for