Satellite A-P70-11V - HARD disk protection works without accelerometer?

Similar Questions

• Tecra S11 - 140 - HARD disk Protection works only with windows 10

  After a clean install of windows 10 in my laptop S11-160, Device Manager does not recognize HARD drive Protection sensor, so in the HARD disk Protection settings, this option cannot be enabled. Is it possible to fix it, or I come to windows 7 and then move to 10?

  Another problem is that when I try to burn a dvd or a cd, I get an error: "write speed is too fast or too slow. The reader, MATT * A DVD-RAM UJ890AS, worked perfectly on windows system 7.

  Any help would be appreciated!

  After you install clear 10 Windows in my laptop TECRA S11-160, Device Manager found no sensor HARD drive protection, so within the parameters of this protection cannot be enabled. What I have to go back to windows 7 and upgrade to Win 10, or is there another solution?

• Equium U400-145 - where is the HARD disk protection tool?

  I just bought an Equium U400-145, and in the manual it says there is a Protection of the hard disk utility and properties are accessible from the icon on the toolbar or via the start menu in Toshiba - Utilities.

  There is no icon in the toolbar and without Protection of HARD drive in the start menu. Protection disc HARD drivers are on the C: drive, but when I try to install I get a message HDD Protection is not supported on this model. It's strange because the download from Toshiba site lists the Protection drivers from the HARD drive for this model.

  Any who have HARD drive Protection works on this model or know if it should work?

  I have a U400 to and protection of the HARD drive is not available on all models of laptops U400.
  The user manual has been created for all the U400 laptop models and it of possible that your U400 doesn t support this feature!

• Satellite M840-B500: utility of disk protection HARD and low sound

  I have a Satellite * M840-B500 * portable.

  1 Toshiba * HDD protection utility * appeared in its characteristics.
  but it was not installed when I got the laptop.
  I downloaded the HDD protection software against download of Toshiba Europe
  but during the installation of the software it says that this feature is not available in this model.

  2. the sound of the laptop is very low, even if the 'srs premium sound hd' is enabled. All audio drivers are up to date.

  I bought the laptop from the UNITED Arab Emirates and now I am in India.
  Thanks in advance

  > 1. Utility of Toshiba HDD protection was included in its features, but it was not installed when I got the laptop.

  Sorry mate, but what do you mean by appeared in its characteristics?
  If the HARD drive protection utility is not installed by default, the laptop does not seem to be equipped with a sensor HARD drive protection.

  > 2. The sound of the laptop is very low, even if the 'srs premium sound hd' is enabled. All audio drivers are up to date.

  There are not a lot to do to ensure that all volume controllers have the highest value.
  You can do this in Control Panel-> sound-> the Read tab
  You will find various reading devices. Right-click on the device (speakers) and choose Properties.
  Here you can set the volume level

  Of course, you can click on the small speaker icon in the toolbar display volume control

• Satellite M40X-189 - replace HARD disk - what size should I go to?

  Hi, I have a SATELLITE M40X-189, I would like to replace the hard drive and would like if possible some recommendations!
  I know I need an ide/pata and I currently have a hard disk of 40 GB hitachi 5400 rpm installed. The memory is just what came installed originally, (512 MB, no upgrade).

  So what size I can up to?
  I have a lot of music/photos and video to change so must also size decent 80 GB would be enough?
  I really don't use it for anything other than that, and also the navigation on the internet. Although I often have a few programs running at the same time which causes problems... freeze, (in particular I tunes) and generally slow running.

  I'm confident on the physical replacement, and I know how to clone my old drive hard etc, but just need some info about the size and speed and if possible
  a recommendation of the manufacturer. Just worried about incompatibility really issues.

  Also, if you think I should install more memory, which size and make and model may recommend.

  Thank you in advance!

  Denise.

  Hi mate

  First he must know that this question have been posted a lot of time in the forum.
  If you want to use the search option, then you will find this thread for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=68287

  Is the M40X series supports the IDE controller and I think that you need a 2.5 IDE HDD.
  The old ide controllers are limited to 128 GB with 28-bit LBA
  However, you can take an 80 GB or 120 GB HARD drive and it should work fine

  Welcome them

• Satellite L50-A-19N - HARD disk controller is not compatible SATA 3

  Hello.

  I have a model of L50-a-19n satellite.
  The hard drive it is HGST Travelstar 5 K 1000 750 GB, SATA 6 Gbps (HTS541075A9E680/0J22412).

  On Web site of the manufacturer and as Aida64 diagnostic software the hard drive is named SATA-III 600 MB/s.

  But when I run the Crystaldiskinfo software or simillar, it is said that the taken and current transfer mode supported SATA/300.
  Why is it like that?

  Is this some sort of software limmitation?
  In the Bios, I turned on the performance mode.

  HARD drive supports SATA 6 Gbit/s, but the portable controller is probably limited to SATA II (3 Gb/s)

  If the HARD disk controller does not support SATA III, HARD drive performance will be limited.

• Satellite 300CDT: number of HARD disk - partitions show only 4 GB

  I have an old Satellite 300CDT, I can't support it appears not yet listed on the Toshiba site.
  I have added a new hard drive and bought a 40 GB drive, but it will only show 4 GB per partition.
  I want 2 partitions that I have and in fdisk I said 50% for each but it only shows 4GB each even though it says support big readers.
  I'm running Windows Me.
  Is it possible for an old laptop of this type to display the size of the hard drive.

  Thank you

  Hello

  Did you use the FAT32 or NTFS?
  I use partition Magic 8 to do and to manage the partitions on the HARD disk.
  In my opinion, you should try this program. I think that using the PM8 you will get the total size of the HARD drive.

• Satellite 2410-404: which HARD disks are supported

  Hello

  one of our phones, to a new hard drive. What toshiba product are compatible to our Toshiba Satellite 2410 404?

  concerning
  Jan Wernecke

  The problem is that Toshiba provides official information on compatible HARD disk HARD disk sizes.
  But I've studied a bit in the internet and the following four sizes of hard drives must be supported:
  20 GB; 30 GB; 40 and possibly the 60 GB.

  Perhaps more info:
  Must HARD disk supports the improved IDE ""(ATA-5) EIDE interface ".

• Satellite P30 - the Maximum hard disk size

  Hello
  I have a Satellite P30-141 with BIOS version 1.40 works with XP pro SP2.
  The hard drive is a 60 GB model and I want to move to a larger model.
  I think a 160 GB Seagate 5400.3 model but I'm not sure if the BIOS can support such a large unit. Did anyone done this before? What is the biggest player, that you put in your P30?
  I also have the Hitachi 7K 100 100 GB as a second option if the Seagate won t work.
  Thanks for your help.

  Post edited by: kid_ying

  Hello

  I don't know about 160 GB and 100 GB should work without problems.

  Good bye

• Satellite A 40, upgrade hard disk

  Hi, I have a laptop Toshiba A 40 with a DVD-R/RW drive. My desktop pc has two hard disks with an 80 and a 120 GB.
  What I'm wondering is can I connect hard drives in Notepad using a specially designed adapter or any other kit so that I can transfer the data stored in them in a DVD-R?
  Thank you.

  If you remove the disks, you can put them in a case that connects via USB to your laptop.
  Or... you could just share your discs on the network.

• PA4293E-1HN0 HARD disk not working anymore

  Hello, my hard drive has worked several times but not working anymore on my PC

  PA4293E-1HN0
  Toshiba series DT Desktop 3 to, SATA 6 Gbps

  Series: DATA STORAGE 3.5 SATA HARD DRIVE 3 TB [table]

  I am on Windows 7, I tried another hard drive on my PC, this one worked just drive hard toshiba

  I tried to re installed Windows because it is perhaps a problem with the registry, but I have this error code: e0000100

  The question is: the BIOS recognizes the HARD drive and it is possible to access or to format the HARD drive...
  If the HARD drive is not recognized by the BIOS, then the HARD drive is faulty and must be replaced.

• Satellite A60 - 302 slow hard disk?

  Hello world!

  I bought my laptop for two weeks, I have a little problem with it. When I try to watch movies or listen to MEPs on my laptop files is sometimes the sound is echoing or stop for a second. I thought that it causes the slow hard disk. Anyone have the same problem with this laptop?

  I have try the last its alc-250 card driver, but it has not helped. Any idea?

• Satellite Pro L10, the hard disk activity?

  Hi, I noticed that on my new L10 Pro of Satellite keeps it hard drive light flashing every 3 seconds approximately and I can also hear disk activity, even when he's just sitting there idle. I was wondering if this is normal, if so why? I was a little suspicious, so I checked all processes running, nothing suspicious. I thoght maybe it's because my drive is fragmented, then defragmented but no change. I thought maybe theres a kind of disk being cached on. I have 512 MB of ram and adequate committed virtual memory, if its doing with VMM is this normal?

  Hello

  It is not easy to say what the reason for this. I had a similar problem with my Satellite. The HARD drive was very often active and very slow. In my case, the reason was the antivirus software. The scanning of the HARD drive has been the almost permanent process and something to work on the machine was almost impossible.

  After removing the antivirus software HDD is fast. Now, I found a new and there is no problem more.

• Re: Satellite A210 - reinstall external HARD disk files

  I backed up by Satellite A210 files on a Western Digital Passport drive prior to running the Toshiba restore disk. When trying to re - install files I asks me to format the disk in drive d if I do this I lose the data, I have it plugged into a second laptop and it works fine.

  How can I transfer files to my laptop? The two laptops using Vista Home Premium

  Hello

  I'm a little confused about your ad, personally for me it s not clear m.

  If you must run creator of recovery disk Toshiba blank DVDs to create such an environment of recovery. Therefore, you can use an external HARD drive.

• Satellite A300-1J1 - resize hard disk partitions

  Hello, a little long but need the expert advice from you guys.

  Recently, I bought the laptop above with a 250 GB hard drive. It comes preinstalled with 3 partitions as follows:

  1.5 GB: hidden partition Toshiba System Recovery
  116 F: (C :)) System Partition of Windows Vista)
  GB 116: (E) Toshiba System Recovery Image file

  My understanding of pass briefly on these forums, the hidden partition houses the mini operating system that controls the real Windows recovery and Image file contains data extracted and installed on the C:? If I'm wrong please let me know!

  Anywyay, the problem I have is that I prefer to have all available space mapped in the C:, rather than on the E:. I tried to use the disk management utility to shrink and then expand the partitions, but it wont let me c (I guess it is the system partition, maybe?). I also tried to use the Diskpart.exe program, but to no avail.

  The plan I have is to create the recovery disks two DVDs of the utility from the desktop icon.

  Copy all the data recovery of E: (approximately 5 GB worth) off the coast of the laptop temporarily.

  Manually by using a 3rd party utility drive partition, delete C: and E: and then set the partitions c: = 224GB and E: = 6 GB.

  Via the recovery DVD, restoration of Windows Vista in the C:.

  Copy all the data recovery back on E: to nowdays fill it and keep it for any future recoveries from disk rather than the DVD.

  What I need to know is, is it as simple as that, or I'll run into trouble? HARD drive recovery utility still work the resized partition?

  If there are better ways to do or things to watch then please tell me how to on this subject. I would like to know if you guys did the same thing or have left as it came with 2 large partitions.

  Thanks for any answers in advance.

  Hello

  I think you can have 3 primary partitions.
  In your case if you want to create other partitions then you can choose the extended partition!

  Just for everyone here:
  Before you modify the partitions (C-system partition or E-recovery partition), you must create the Toshiba Recovery DVD.
  So if something goes wrong with you, HARD drive, system, either, you should be able to restore the operating system from the Recovery DVD!

  So before you change the partitions-> burn the recovery DVDs!