Satellite A10 Graphics control

Similar Questions

• Satellite A10: WinXP SP2 & problem sound :(

  Hello!
  I have laptop Satellite A10
  System - Windows XP and SP2
  The sound does not work :(
  Has implemented the last driver - http://support.toshiba-tro.de/tools/Satellite/sa10/win-xp/sound-xp-512013542.zip did not help :(
  Everything works without SP
  Help me!!!

  Hi sm,.

  When you want to download a driver there is a document entitled information update Microsoft Windows XP SP2. All right, I see the update for Driver Sound is not necessary for your A10.

  Check sound and Audio Devices Properties all settings anyway.

  Please also check your Volume control side dial on the front of your laptop. :)

• Satellite A10 problems...

  Hi, I have a laptop Toshiba Satellite A10 with Windows XP Pro and I upgraded the RAM to 256 MB 510. But... does not work all my new game on it! The laptop must be pretty hard! I've updated all the drivers... but still nothing!

  Can someone tell me what is the problem?

  Kind regards... Hans

  Hello Hans,.

  Sorry, but what does not work?

  You get an error message during playback?
  Is there a plugin missing as direct X for example. Or is the power of the graphics card to the inadequacy of this games?

  You may have a game for example?

  Good bye

• Incompatibility of modem satellite A10

  Hello
  A few months ago, I bought the laptop satellite A10 in Australia. All the time I've been able to, I was very sattisfied with it.
  Now, when I moved to the Slovakia, I realized an incompatibility of modem dial-up, so the modem does not work in Slovak telecommunications network.
  Is it possible to install a firmware or to do something about this modem won't work in this area?
  Thanks for help

  Bishop

  Hello
  Checked the modem country settings in the control panel?

  Good bye

• Satellite A10: Modem - no dial tone error 680.

  Hello

  Seems to be a common problem search the ends of the net even if I have to find a solution.
  No dial tone error 680. Satellite A10 running Windows XP SP2.
  Interviewed modem-It's ok.
  Check wait for the tone. still not connect.
  Have tried different telephone cable, ISP, reinstall the drivers, control of the region (UK).
  Check the malware, corruption of the registry. Nothing there.
  Reinstalled from the Toshiba restore CD. Still the same problem.
  The BONES of config system permit
  Check for driver updates. None.

  Manage devices only show and COM ports if Port Modem Properties settings show that it is at COM3. have tried to change to COM4 - makes no difference.

  What is the solution?

  Hello

  This error almost always occurs because the computer cannot hear regular ringing when it picks up the phone line to dial through the modem.
  Unfortunately, there is no standard solution for this problem.
  Did you check that the modem is plugged into a phone point in the wall?

  In addition, check out this site for information:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326681&product=winxp
  http://support.GCI.NET/KB/kb74
  http://support.earthlink.NET/Mu/1/PSC/IMG/walkthroughs/windows_9x_nt/dialers/dun_1.3/2267.PSC.html
  http://www.Xtra.co.nz/help/0, 6156-1296801, 00.html

  Good luck

  Good bye

• satellite A10: no com3 don't dailtone

  We have a toshiba satellite A10 with a modem internal toshiba. (XP OPERATING SYSTEM)
  We lost the connection while working, and when we tried to reconnect there was no dial tone.

  the modem works fine after interrogation he under the modem diagnostics, but just to be safe, I also tried another card modem with the same results.
  the line is very good, I use it now.
  in Device Manager, I could not see an entry for the ports, so I did a scan of hardware, but which does nothing and then I added a Compote via the Add Hardware icon in Control Panel. This solves the problem I couldn't see the ports in the Device Manager but now the thus created com3 has a yellow exclamation point and tells me that the device cannot start code 10.

  So I deleted all the devices of yellow exclamation point and the modem, then restarted and after that the modem is immediately recognized and installed but her agrees not and they must be added manually with the same result of yellow exclamation point.

  Some people suggest I get into the bios and remove or disable the ports and then start but bios does not even an entry for the ports. I get into the bios by keeping ESC pressed to the commissioning and in fact Toshiba adds a nice button on the control panel with HWsetup that gives the same options.

  so now, I ran out of options and turn to experts for help.

  Thanks, Leo

  Hello

  Code 10 means that this device cannot start. I'm a little confused about your problem. First COM 3 is a virtual port and it is normal that this port is invisible. If this port is visible, it must be with exclamation yellow because it's the virtual port, no real hardware. But it is not necessary be installed with the Add Hardware Wizard.

  Your problem can be caused by many things.

  1. delete all entries with yellow exclamations. Search for hardware changes again. Now new modem is installed, and my opinion is that should now work correctly. But remember: you must make the new dial-up network connection and old must be deleted. It is very important because the old a lot of content of information settings that installed new Modem cannot use more. Also check the properties of your modem.

  2. after the installation of your modem card, there may be some conflicts with Modem from Toshiba. If you do not use the modem card all maybe more, is useful to delete all installed software.

  3. it is also possible that you have some dialer installed on your machine. Check it!

  If that doesn t work, please let us know. And if you create your connection again, tell us what a problem was.

  BR

• Keyboard on my Satellite A10 error

  I have a portable satellite A10. It works very well, to accept a part: the keyboard. No reason, at some unpredictable point all the special keys on the right-hand side are mixed up (as of the key (,. / '=} etc.).) So, for example when I use the key / on the screen you will see =. I tried an external keyboard: same error. The problem can be resolved by restarting the computer, but it is up to each time.

  The laptop is purchased nov 2003, tried install several drivers, nothing has worked. Everyone recognizes this problem?

  Hello

  I guess the reason for your problem may be in the language settings. {[For example, if you have a keyboard of the France and the default input language is set to English, all the keys as & ^ _]} + will be mixed.

  Please check under the Control Panel regional and language under text services and input languages Options, you will find the Details button. Go ahead and check your default input language. Should set you your regional language.

  If you have some problems after that, please write again.

  Good luck!

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• The keyboard on my Satellite A10 settings

  2 of my keboard keys Satellite A10 shows the symbols wrong pressed in conjunction with the SHIFT key. Can someone advice how can I reset the keys as marked operation.

  Gerrys

  Hello

  check your keyboard settings yet? Go to start - Control Panel - keyboard - Hardware and check the settings.

  Try and hold me
  Pete

• No noise and acoustics on Satellite A10-S177

  My laptop is a Satellite A10 - S177 XP, I happened to remove some programs from my laptop to create space, but it happened that he touched my audio and sound and currently they sound and audio bit in the control panel don't say no audio/sound driver. Tried to down load some software from the net but it didn't work because he needed that I don't have access to the printer.

  I don't have my XP installation CD, am so all lost and could do with any help of computer geniuses out there.

  Thank you
  Caroline

  Hello

  First could you tell me where you downloaded a software where you thought that he would bring back your sound?

  As your machine is America, you go to the website of the American driver download:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  Please visit the link I ve posted and download the audio driver. Install it and check if the sound works.
  In the case of any question just feel free and ask...

  Greetings

• Satellite A10-SP100: can I manually enable the CPU fan

  Hi everyone, I need help with that.

  My active cpu at 60 ° c, fan but his stop at 50 ° c.
  The thing is I want my CPU fans to stop at 40 and not 50, ' coz it off my pc when I do something heavy (game game, etc)

  My question is... it is a way to manually activate my fan and then turn it off when it reaches the 40 ° c approximately
  I have a Toshiba Satellite A10-SP100 wih Windows XP Pro.

  Thank you very much!
  Pablo

  Hello

  What you can do is to change some parameters in the Toshiba Power Saver.
  I assume you are using this tool and it s preinstalled on your system

  OK, you can find the Toshiba Power Saver in the control panel.

  Access the GST and chose the details of you power mode.
  Then switch to the power saving (second tab) and set the method of cooling for maximum performance.

  This should increase the fan speed and cooling performance.

  Concerning

• What CD/DVD drive is compatible with the Satellite A10 S103

  I use the laptop Toshiba Satellite A10 S103 and I am about to replace the CD/DVD-ROM drive of origin by a new who can also write CDs and DVDs.

  However, I got a notice, that after the installation of the new DVD to drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  Can you recommend a drive of DVD - RW which could replace the old DVD - ROM drive and would work without any additional adjustment of HW?
  The new DVD - RW drive should be similar to know
  [http://www.sonynec-optiarc.de/en/exhibits/slim-line-drives/ad-7540a.html].

  However, I was not able to decide that if this device will be or does not work in my computer that I don't know the parameters of the original DVD.

  My original Toshiba DVD drive information as follows:
  ' 1. ' "model SD-C2612
  2 "ROM worm." 1315
  3 'serial No.' 394N002659
  ' 4. ' 302 ' version number.

  The computer is already out of warranty

  Thank you.

  > However, I got a notice, that after the installation of the new DVD drive "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  You are right. FDI #1 error is displayed because the BIOS doesn't recognize the new internal CD/DVD drive because of the wrong master/slave/c-salt settings.
  Usually, these settings are fixed and cannot be changed on the external sides with another position of the rider.
  The firmware controls the notebooks internal parameters ODD.
  The use of ratings taken in charge and compatible is so very important.

  Sorry, but I didn t find details of compatible CD/DVD players.
  Did you look in the user manual of your laptop series?

  In my manual, I found some info on my laptop-compatible players.
  So maybe you are a lucky man and your owner's manual will provide useful information.

• Satellite A10: modem port conflicts - error: 633

  Hello

  I currently have a laptop satellite A10 but im having trouble to connect to internet via modem, I have installed a new driver for my modem (modem psi) and when I try to dial up right now get error: 633 could not open port due to a conflict of port or its propaly not configured, I downloaded a new driver, but still nothing.

  I checked the ports/Device Manager and there is no port for the modem only a port for a printer of suggestions on how to solve this problem?

  Hi guys

  I ve searched and studied a lot and found this solution provided on the Microsoft Knowledge base.

  Check this document:

  * + Error message: the Modem is not installed or configured for + *.
  http://support.Microsoft.com/kb/q191444/

• The country on Satellite A10 S203 modem settings

  Hello

  I have a Satellite A10 S203. I use my laptop for most in another country then my home country (Netherlands).
  I tried to connect to internet in Germany, and I couldn't change the country of the modem.

  Does anyone know so and so, how, to change the countrysetting of the modem of my A10 S203?

  GRTS Frank

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2515&tstart=50 please

  If all goes well it will help you. If this isn't the case, please write again.

  Bye and good luck!

• Satellite A10 S103 - how to reset the Bios password

  Hello world

  I have an old Toshiba Satellite A10-S103 (model No. PSA10E - 00KWY - GK) and I forgot my bios password and I am trying to reset it by finding the jumper cmos on the motherboard (FHZSY1), but there is nowhere the J1 or pins to reset my cmos.

  Please help me

  [How do I remove a BIOS password if I forgot it? | http://APS2.Toshiba-tro.de/KB0/FAQ35002I000IR01.htm]

  + You can not remove a BIOS password yourself, if you forgot it. +

  + The laptop must be returned to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service charge. +