Satellite A10-how display colors when connecting to a TV?

Similar Questions

• Satellite A50. No color when you switch to the tv function

  How is it has no color when I'm on the TV?

  Hello

  There may be more than 1 pattern:

  The most common reason is that the machine displays the TV signal in NTSC format while the TV is built / set to PAL (or vice versa). Please check the videodriver to see if this setting is there.

  If your using a S-video connection to the television and the need a converter to connect this cable to the TV, it is also possible that the TV itself is not fully compatible with this type of signal. It could lead to a black & white experience. It should not be the case however if the TV is new.

  All this assumes that the cabling you are using are correct in all respects of course!

  Hope this helps

  BR

  Tom

• Satellite A10, how will we change access BIOS Menu?

  I have a big problem with the Toshiba Satellite A10.
  I want to re install Windows XP by starting in the CD Rom, but by default, the startup is for HD.

  Turn on my laptop, pressins press ESC, then F1, we have the menu of the BIOS, BUT we can only change the time and the password.
  I don't know how for the Windows BOOT PRIORITY to change the setting.

  Please help me!
  I would change the Boot Configuration, but impossible in the menu of the BIOS even by perform F12 key when from the laptop.

  Hi nclaude,

  Normally, you enter by turning on the laptop by pressing the ESC key, then F1 to bios.

  If you can only change the time, it could be that you without administrative rights in the bios.

  Perhaps you or someone else has entered a supervisor password to save the bios of unauthorized changes!

  But you can also boot CD-ROM by pressing c (for the cd Rom) in the startup process.

  hope this helps you

  BR

• Satellite A10 - how to get the new job of CPU?

  Hi all

  Cut long story short:

  I own a Toshiba Satellite A10 former model Celeron 1.8 Ghz processor, running Windows XP SP3.

  Just bought a 2.5 Ghz Celeron processor SL75T, verified even FSB, same PIN, compared to the current 1.8 Ghz via Ebay.

  Do you have a swap and replace the 1.8 Ghz with the last 2.5 Ghz, the laptop is able to start, but it just hangs before entered into normal windows.

  I tried safe mode, it went smooth, however intermittently crashes, too, but unless I could enter and change some settings.

  Initially thought it was the power of thermal design of the 24.5W old abreast 35W. Although without any solid evidence to me i.e. get made reliable on temperature processor 3rd party software (coz the 3rd party software cannot run in safe mode environment), the fan is still running strong, just changed new fan not too long.

  My hunch is that, when I was in Safe Mode Windows, I could see that in the list of the hardware in the Device Manager, the processor is still showing old clocked at 1.8 Ghz and not the latest 2.5 Ghz? However, when I right click on my computer and select Properties ==> system properties, it is show 2.49 Ghz-very good, just not inside the hardware of the Device Manager list. I tried to uninstall, but it still does not work after that several reboot.

  I don't think that there is no driver for the change of processor, what should I do to avoid this 2.5 Ghz to hang up every time before, it tries to go in normal windows? I think that this should be an operating system problem I right? (not sure) Please enlighten. Thank you!!

  Hello

  in my opinion, your motherboard is not strong enough to continue to run this processor and any 2.5 Ghz Celeron processor SL75T has the same FSB and the stem.

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• Satellite A210-127: display colors began to be weird

  Hi friends

  Well I installed win xp pro sp2 on my laptop. I managed to find all the drivers for xp.
  A week ago I noticed that while my laptop worked for about 2 hours or more, the display colors began to be weird.
  A shade of blue covers parts of the screen and in some cases, I see a few icons or a part of the pictures (like desktop) to tremble.

  As I have some experience of it I tried to close the cover (screen) and then to open it to know if the sceer has a problem, but no, the problem was still there.
  I restarted the laptop and everything is ok. AFEW more hours of work and the problem again apeard. I tried a bios update and reinstalled the display drivers.

  The problem was not resolved. So I disconnected all usb devices and battery and rebooted.
  After a few hours, the same problem has happened so I looked in the case where the viewer and that there was no error. I am convinced that I have to blame the display drivers, but I'd like to hear opinions.
  My graphics card is ati mobility radeon 2600

  Thank you

  Hello

  I don t think it is a software problem and therefore in my opinion the update of the graphics driver is simply not necessary.
  For me, it looks like a hardware problem. Probably the fault of operation of the FL-ups!

  I recommend to connect the external monitor to the laptop while the shade of blue is displayed on the internal screen for laptop!
  If you see the same thing on the external monitor that maybe the GPU causing this strange issue.
  But if the problem isn't on the outside monitor then either display laptops or the FL inverter causes this problem.

  In both cases it s advisable to contact the service provider allowed in your country, because the part which malfunctions must be replaced.
  I think that the guarantee is valid and this is why everything should be done for free!

  Good luck

• Satellite A200-195: green screen when connect or disconnect the charger

  I had the highest for several years now and you did not have any problems with it, but now every so often when plug us or unplug the charger the screen turns completely green and the only thing that can be done with it is to turn off and restart.
  What is terminal or fixable?
  Don't want to pay for a new if this can be fixed!

  Hello

  I guess that the brightness of the display should change when the AC adapter should be connected or disconnected. Usually the brightness of the display should be lower when laptop works only on the battery and the display brightness is expected to increase when the AC adapter is connected.

  The brightness is with FL Inverter.
  It is a small part behind the frame of the screen. The replacement does not have to be expensive.

  But that's just my personal suggestion. Maybe it's question of s inverter not FL
  However, the first point of contact would be the ASP in your country
  Get in touch with the guys and allows to check the laptop.

• Satellite T130 - how 300 Mbps of connection?

  My Satellite T130 only connects to my Wireless N 150mbps. I have 2 other laptops that connect at 300mbps. How can I get the T130 to connect at 300mbps?

  Is he capable of 300mbps (the Realtek site suggests the chip RTL819SE is capable of 300mbps)?

  Hi johnt.

  At the moment it of not easy to tell why you n t get full draft N speed.
  In my opinion you need to update the WLAN driver first. All WLAN updated driver that you can download on the official Portal of Toshiba WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, you should check the Windows Management. Make sure that the economy of energy WLAN functionality is disabled.

• Satellite A500 - Remove the battery when connected to the network?

  Hello

  I bought a new Satellite 500 and I would use it as much as possible. I'm not sure the stage of development of this battery. Should I remove the battery when I use the laptop at all times with the net supply?
  Or this does not damage the battery longer years yet there is, or is the problem of the destruction of the battery because of the heat and being reloaded frequently persists?

  I'm sorry if I could post to redundantly, but it is difficult to search for information, since I'm not a native speaker.
  I encourage you just for a small tip for a related thread if available.

  Thank you very much!

  Hello

  To be honest, I often work with connected AC/DC adapter, but I never removed my battery. Sometimes I decide to work in another room and then I just unplug the AC adapter and that s all the! :)

  Furthermore, I founded this interesting link for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• No Satellite A300-1MC no sound when connect you to the LCD

  When I connect by Satellite A300-1MC HDMI port for my Toshiba Regza 37 "AV LCD series 37AV555DB and play a movie the sound comes out the laptop and not from the TV...?

  I have to do something to the settings? I tried other HDMI port and have the same problem...! Please can someone help?

  Do I need an another audio connecting cable? I used a VLC Player on the laptop, if this can be the problem?

  Any suggestion is welcome.

  Thank you

  Hello

  I checked Toshiba basic knowledge about the Toshiba support page and found some interesting documents that can help you:
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm - This document is written for Qosmio laptop but the principle must be the same.
  Is under audio playback are peripheral digital (S/PDIF) or HDMI output?

• Satellite A10: How to use the restore CD?

  Hello everyone,

  I would like to restore my Windows due to problems of somes, so I inserted the recovery of (1) CD. The partition of loading began but very slowly. After you insert the CD 2 ° (only after a couple of hours), I left it for a few hours. When I got home, the display shows the command-line C: >.
  The command C: > dir /p gives something like

  Tools dir
  Restore.bat
  ....

  Could someone what happened? What do I do now?

  I thank very you much for any suggestions!

  Hi Torcy,

  I would normally not more than 20-30 minutes to complete the recovery. The progress indicator should show a steady increase up to 50%, after which it should invite you to insert the second disk.

  It is possible that you laptop has problems to write to the hard disk. You can check this by listening to a sound of rattling repeated during the restore process. It is also possible that your CD is having problems reading the recovery disks. Check them for dirt scratches or fingerprints.

  HTH

• Satellite A500-19U - black screen when connect the charger

  My PC works fine in the windows environment, application, video, mp3 palyer. In the game works well with a battery. When I plug the charger games are starting to give me a black screen or accident line and sfx in the background.

  I try to leave the PC work with the charger without a battery, the game crashes. When I press CTRL + ALT + DELETE then cancel the game recover back for everything in & do it again.

  My maps updated with the latest video driver [Nvidia G210M] and install the latest Toshiba BIOS

  Any solution guys:(heures départ à me déteste:()

  Hey Buddy,

  This occurs only on the games or the windows too?

  Are you running the factory settings or did you do your own installation of Windows?

  Maybe that's a problem with the display driver. You must reinstall the latest driver from the Toshiba page. Don t use the nVidia drivers because they are not pre-tested:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.

• Page can not be displayed error when connect on the EBS homepage

  Hi all
  
  I have a connection problem to EBS page, if only one responsibility is active for user it will get error Page cannot be displayed error 404 on the main Menu.
  However, if 2 or more responsibilities are active no error will appear and it will show all the responsibilities.
  Here is the log that I got from apache.
  
  
  [Thu Apr 28 15:58:26 2011] [Warning] mod_plsql: connection outdated due to the Oracle 6502 error
  [Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
  ORA-06502: PL/SQL: digital error or value: hex to raw conversion error
  ORA-06512: at the 'APPS '. ICX_CALL', line 1077
  ORA-06512: at the 'APPS '. ORACLENAVIGATE', line 2358
  ORA-06512: at line 28
  
  Grateful if someone can share something about it.
  
  Database server
  ----------------------------------------
  RDBMS: 10.2.0.2.0
  Oracle Applications: 11.5.10.2
  
  Thank you very much

  The responsibility of a forms? If so, MOS Doc 555580.1 ("Oraclenavigate.Menubypass was not found" error on Login after CPU Oct 2007) may be relevant

  Srini

• Satellite A10: How update the DVD-rom?

  Hello

  I wounder how to upgrade my DVD-rom?
  Where can I find the name and number and where to find the updates?

  SlugO

  Hello

  I put t know what you want to be updated on your drive, but generally you will find details of the drive in the device manager of your OS.
  Check the properties of the drive.