Satellite A10 - Scecrv.dll is missing

Similar Questions

• Satellite A10 problems...

  Hi, I have a laptop Toshiba Satellite A10 with Windows XP Pro and I upgraded the RAM to 256 MB 510. But... does not work all my new game on it! The laptop must be pretty hard! I've updated all the drivers... but still nothing!

  Can someone tell me what is the problem?

  Kind regards... Hans

  Hello Hans,.

  Sorry, but what does not work?

  You get an error message during playback?
  Is there a plugin missing as direct X for example. Or is the power of the graphics card to the inadequacy of this games?

  You may have a game for example?

  Good bye

• Satellite A10 - does not start correctly

  I have a Satellite A10 and I can't start even last known good configuration or in safe mode does not work and if it starts it will take much time but a blue screen appears and indicates that an error has occurred and prevent any damage on the hard disk.
  I put in the recovery cd, but I do not have the cause of xp, it is said start windows 98 but im on a xp pro I got when I bought the laptop. So, if any of it can help?

  HI Johan,.

  If you are unable to boot from your hard drive, then your only other option will be to boot from a CD-ROM.

  Most of the commercially available backup utilities (Norton Ghost, Acronis True Image, etc.) include such a bootable CD. Supplied with your laptop product recovery CD is very probably a stripped down version of Norton Ghost, which is specifically designed to format your hard drive and then restore an image of 'Phantom' of the original OEM software.

  It is quite possible for your hard drive to be damaged and have still LED lights when it is accessed. The damage might be the physical mechanism of the player, or the lining of the surface of the platters etc.. A CD bootable one of backup utilities will probably include a version of CHKDSK, you can run to test the integrity of your hard drive. Norton, for example, include a copy of Disk Doctor.

  If you have a copy of the original Windows installation CD, you can boot from that in the recovery console and try to repair what is damaged on your hard drive, assuming that the problem is that the damaged or missing files. In principle, you can use the XP Home Edition CD to do this only if the damaged files are not specific to XP Pro to which cases they will not on HE drive.

  HTH

• Can I create bootable disc for my Satellite A10?

  Hello! I run Windows XP (SP1) on my Toshiba Satellite A10/15. I think that there is something wrong with the HARD drive. Manifests problem as very slow system attempts to write something on the hard drive and multiple messages on ' missing config32, lack of attempts to write MFT$, bad clusters ' etc. I'm not too well known, so I'm rather lost in the bunch of info on all the these chkdsk/f, Testdisk, Bart PE, Hiren's BootCD, pressing F12 or F8, primary and logical partitions the user etc. Please help me with some basic things in my head!

  1. I have Toshiba Recovery DVD. I think it gives me a single opportunity: to lose all my files and restore the Virgin system I got when I bought my laptop. If I can make a bootable CD (I have CDRW/DVDR) and boot from it? (I have a urgent translation work for a client cross now and would like to put my extra computer education until I give him the satisfaction.)

  2 if I download XP2 or XP3 on Microsoft site I will be able to make my own bootable CD? (My internet connection is slow and it is difficult to download large updates whenever my system is reluctant.)

  3. What is the right path to solve the problem with the bad clusters? Is there a proper sequence for through remedies that I mentioned above? Or should I try all the remedies I mentioned above to my own sweet will (as soon as I read about them)?

  Hello

  The A10 is a former, and it is not impossible that your HARD drive starts to malfunction.

  (1) it seems that you have one of the oldest recovery disk that supports the standard recovery procedure and expert recovery procedure. The standard collection format the whole HARD drive and erases all partitions from the disk. Recovery expertise formats only the partition where the operating system will be installed.
  So you can use the recovery expertise to reinstall the operating system on the partition.

  > Can I make a bootable CD (I have CDRW/DVDR) and boot from it?
  Yes. You can create this disk. For example, Microsoft Windows PE can be useful. Google a bit...

  (2) you can not download the Win XP... you can download the SP2 and SP3, but this service packs are can be used in the framework of pre-installed Win XP OS.

  (3) the /F command chkdks corrects errors on the disk... also deliver the bad clusters...

• "WLDCore.dll is missing and cannot be found.

  Trying to open today w/attachment I get the message, "WLDCore.dll is missing and not found" I have a HP Pavilion Slimline.

  I want you to know that your solution has been on the spot!  I tried the "Windows Update" and in 5 minutes. everything has been solved... Thank you very much.

• Satellite A10: WinXP SP2 & problem sound :(

  Hello!
  I have laptop Satellite A10
  System - Windows XP and SP2
  The sound does not work :(
  Has implemented the last driver - http://support.toshiba-tro.de/tools/Satellite/sa10/win-xp/sound-xp-512013542.zip did not help :(
  Everything works without SP
  Help me!!!

  Hi sm,.

  When you want to download a driver there is a document entitled information update Microsoft Windows XP SP2. All right, I see the update for Driver Sound is not necessary for your A10.

  Check sound and Audio Devices Properties all settings anyway.

  Please also check your Volume control side dial on the front of your laptop. :)

• Satellite A10: modem port conflicts - error: 633

  Hello

  I currently have a laptop satellite A10 but im having trouble to connect to internet via modem, I have installed a new driver for my modem (modem psi) and when I try to dial up right now get error: 633 could not open port due to a conflict of port or its propaly not configured, I downloaded a new driver, but still nothing.

  I checked the ports/Device Manager and there is no port for the modem only a port for a printer of suggestions on how to solve this problem?

  Hi guys

  I ve searched and studied a lot and found this solution provided on the Microsoft Knowledge base.

  Check this document:

  * + Error message: the Modem is not installed or configured for + *.
  http://support.Microsoft.com/kb/q191444/

• The country on Satellite A10 S203 modem settings

  Hello

  I have a Satellite A10 S203. I use my laptop for most in another country then my home country (Netherlands).
  I tried to connect to internet in Germany, and I couldn't change the country of the modem.

  Does anyone know so and so, how, to change the countrysetting of the modem of my A10 S203?

  GRTS Frank

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2515&tstart=50 please

  If all goes well it will help you. If this isn't the case, please write again.

  Bye and good luck!

• Satellite A10 S103 - how to reset the Bios password

  Hello world

  I have an old Toshiba Satellite A10-S103 (model No. PSA10E - 00KWY - GK) and I forgot my bios password and I am trying to reset it by finding the jumper cmos on the motherboard (FHZSY1), but there is nowhere the J1 or pins to reset my cmos.

  Please help me

  [How do I remove a BIOS password if I forgot it? | http://APS2.Toshiba-tro.de/KB0/FAQ35002I000IR01.htm]

  + You can not remove a BIOS password yourself, if you forgot it. +

  + The laptop must be returned to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service charge. +

• Satellite A10 dies after the power LED blink

  Hello

  I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

  It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

  I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

  It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

  Thank you for your help.

  Andreas

  Hello

  You description is very long and detailed and it of still not easy to say what's wrong.
  Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

  So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.

• Incompatibility of modem satellite A10

  Hello
  A few months ago, I bought the laptop satellite A10 in Australia. All the time I've been able to, I was very sattisfied with it.
  Now, when I moved to the Slovakia, I realized an incompatibility of modem dial-up, so the modem does not work in Slovak telecommunications network.
  Is it possible to install a firmware or to do something about this modem won't work in this area?
  Thanks for help

  Bishop

  Hello
  Checked the modem country settings in the control panel?

  Good bye

• Satellite A10, how will we change access BIOS Menu?

  I have a big problem with the Toshiba Satellite A10.
  I want to re install Windows XP by starting in the CD Rom, but by default, the startup is for HD.

  Turn on my laptop, pressins press ESC, then F1, we have the menu of the BIOS, BUT we can only change the time and the password.
  I don't know how for the Windows BOOT PRIORITY to change the setting.

  Please help me!
  I would change the Boot Configuration, but impossible in the menu of the BIOS even by perform F12 key when from the laptop.

  Hi nclaude,

  Normally, you enter by turning on the laptop by pressing the ESC key, then F1 to bios.

  If you can only change the time, it could be that you without administrative rights in the bios.

  Perhaps you or someone else has entered a supervisor password to save the bios of unauthorized changes!

  But you can also boot CD-ROM by pressing c (for the cd Rom) in the startup process.

  hope this helps you

  BR

• Satellite A10-wireless problem

  Hello! I have the Satellite A10 with integrated wireless Windows XP Professional. I was trying desperately to make wireless communication integrated works, but without success. Windows has found two "Base system device", and I suspect that one of them is the wireless. I tried to install different wireless drivers that are supplied with the CD for the laptop, but so far without success - Windows refuses to accept these drivers for unknown devices. No idea what I am doing wrong? I downloaded the latest drivers wireless for A10, but nothing has changed. One of my friends suggested that the BIOS must have a setting to toggle wireless, but I couldn't find this setting in the BIOS. Any help would be greatly appreciated!

  Hello
  Initially, you are sure that your computer has preinstalled absolute Wifi?

  To be sure about you could give me the complete Modelnumber or serial number.

  I am so lucky to find the installed equipment.

  THX & bye

• Satellite A10: I lost the recovery CD - how do I get one?

  Hello

  I am trying to reinstall Windows XP on my Satellite A10, but I lost the recovery CD.
  I had a 'normal' Windows XP installation CD I try to use to reinstall, but installation will not take the serial number on the botton of my laptop...

  Do you know what is a workaround for this?
  And ultimately how to get a copy of the installation CD...

  Best regards

  Even

  The key that is located on the bottom of the unit is only an OEM key.
  This means that it only works with the OEM preinstalled and bundled with the laptop version. Simply said, you can't use this key with other Windows operating systems.

  If you want to reinstall the operating system from the original Windows CD, then you must use the key that belongs to this CD!

  However, you can order a new CD from recovery of the ASP in your country.
  Simply contact the guys. They might help you to order.

  Good bye

• Outlook cannot start because DCIMAN32.dll is missing

  Whenever I want to open Microsoft outlook the following textbox is displayed. * The program cannot start because DCIMAN32.dll is missing on your computer. Try reinstalling the program to fix this problem *. Then when I click ok, Outlook opens. Also when you use Internet Explorer, the window open flashes quickly, any suggestions?

  Thank you for your help

  Hey,.

  And have you tried to reinstall Outlook, such as mentioned in the error message?