Satellite A100 - 003 PSAARE - information necessary Ram upgrade
I have a Satellite A100-003 (PSAARE) with 32-bit Vista installed and 2 GB of RAM (1024 + 1024 DDR2 533 MHz).
I was wondering if it is possible to change the 1 RAM (1024MB) with this RAM: 2 GB DDR2 667 MHz?
Support page says that this laptop supports up to 4 GB of RAM total.
Thank you in advance.
Generally this information in the user manual it s always mentioned in the manual that is preinstalled on your laptop.
I downloaded the manual on the Toshiba page and found this:
Slots _Memory: _
+ PC4200 256 MB or 512 MB or 1024 MB modules of memory can be installed in the locations of two memory for a max memory 2048 MB system. +
_Memory expansion; _
Only the memory modules with the number of following parts can be installed:
256 MB PA338QU - 1 M 25
512 MB PA3412U - 1 M 51
By the way; the 32 bit OS Vista won't recognize the 4 GB of RAM due to the limitation of the 32-bit operating system. The 32-bit OS can handle max 3.2 GB.
I have a Satellite A100-003 (PSAARE) Windows 7 Home Premium 32 - bit installed and 3 GB of RAM 667 MHz.
I want to spend my hard drive. But I don't know which model is most suitable for my computer.
There are two options: 7200 rpm or 5400 RPM HARD drive.
What are the advantages and disadvantages of this type of hard drives?
If I buy a 7200 RPM HARD drive, do I have a problem with the heat and noise?
If you can give me some names of HARD drive model that you suggest, it will be better for me.
> There are two options: 7200 rpm or 5400 RPM HARD drive.
> What are the advantages and disadvantages of this type of hard drives?
The 7200 RPM drive is faster than the or 5400 RPM HARD drive. This allows read and write faster data on the HARD drive, but to be honest; in most cases, this difference is not noticeable
> If I buy a 7200 RPM HARD drive, do I have a problem with the heat and noise?
No, normally you should not get any problem the two type of HARD drive are compatible with laptops
> If you can give me some names of HARD drive model that you suggest, it will be better for me.
To be honest, you can use any HARD SATA 2.5 drive. The SATA controller is not limited to a capacity of HARD drive that you can take any disk of your choice
I have a Satellite A100-003 (PSAARE) Windows 7 Home Premium 32-bit installed and 2 GB of RAM (1024 + 1024 DDR2 533 MHz).
I want to improve my system with 2x2gb DDR2 667 MHz Ram.
When I use 2x2gb Rams, my system recognizes them?
Or he will recognize less than 4 GB?
Is there a link between the ram and 32 bit OS?
What are your suggestions?
> When I use 2x2gb Rams, my system recognizes them?
> Or it will recognize less than 4 GB
You use the 32-bit Windows System. This means that your Windows operating system can recognize 3.2 GB of RAM max. It's max possible RAM for 32-bit systems.
But as far as I know that it takes in charge max 2 GB of RAM. Has been mentioned in the page manual user 22 and 33
any who can publish a security way how I can install WXP on my Satellite has 100-003 (PSAARE)? Or where I can download the appropriate drivers for this OS?
Security how? Medium security is not necessary. I recommend you to install the drivers in the usual order. Driver graphic, sound driver, LAN, touchpad, etc.
XP audio driver you can find on the page of the Toshiba driver article PSAAR A100.
Other XP drivers can be used in different series A100. Simply check the only drivers Sat 100 XP and Equium A100 series.
I have the Satellite A100 - 011 (PSAARE) and I just upgraded memory RAM of 4 GB 2x2gb Kingston (KTT533D2 / 2G).
BIOS can see all my 4 GB installed, so my windows (x 64) but my task manager shows me 3069 Mo!
How is that possible? Is it possible to fix this? My BIOS version is 6,00.
Are you sure that you have a 64-bit version of Windows XP?
I ask this question because the Web from Toshiba website does no drivers for Windows XP 64-bit.
If you really have a 64 bit OS make sure that you have installed all Service Packs and patches from Microsoft.
And install a program such as Everest and watch this program shows the amount of RAM.
I have a Satellite A100-003 and I just installed vista 64-bit, which is the correct for toshiba value added package, because I get an error at the end of the installation. Thank you
First of all the buddy I wonder about your first message.
> I just installed vista 64-bit, which is the correct version for Toshiba package extra
I visited the Toshiba European page and I didn t find drivers for Vista 64 bit and VAP for Satellite A100 - 003 PSAARE.
Because of this, I DON T wonder that you receive error messages.
The error messages appear because you use wrong and NOT compatible software.
You have updated the BIOS?
OK, this grand but the BIOS is designed for Vista 32 bit and not 64 bit.
So it s no matter if the BIOS has been updated or not.
So he just said; Don t install the VAP for Vista 32 bit on 64 bit Vista version
1. the first problem is that I bought the notebook of Toshiba Satellite A100-003 model. But when I tried to save the European web site of Toshiba with my serial number it says Satellite A100-011. I do not understand what it means that. But I do not know my phone model A100-003-PSAARE-0470257Z. The serial number of my laptop is: 17739127G
2. Another problem is the European website of Toshiba and Turkey Toshiba official site (http://www.toshibatr.com/notebook_filter.asp?ktg=A100) says Rams are 533 MHz "2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)"but mine is at 266 MHz. "
I was wondering in Toshiba laptops of the Turkey has problems or handed in state something? I sent e-mail to the web site of Toshiba Turkey but they don't send me emails or information.
Thank you for helping me,
First of all your registration number is not a 'problem '. Maybe it s just a small mistake in their database. When I registered my P200 registration reported me another type as mine was, but after a call to the hotline of toshiba told me, that my machine is listed correctly in the database.
Don t worry, register just she.
With regard to the RAM:
Do you know why's called it 'DDR' ram? That means 'RAM memory' and the goal is to double the frontsidebus.
In your case, that means: the REAL AND PHYSICAL frontsidebus is 266 Mhz, but because the flow is double you have a 533 MHz frontsidebus (532, 34.Mhz).
CPU - Z and WCPUID are simply display the physical clock of the RAM, but the frontsidebus double the signal and then you pure and authentic to 533 MHZ.
I hope I could explain something to you. ;)
Have a nice weekend
I just upgraded my Satellite A100-750 of 2x2gb 2x1GB RAM.
The BIOS recognizes 4 GB RAM
but the output of said BIOS then "spent 3 GB RAM system".
My Windows 7 Pro 64 bit OS said it has 4 GB of RAM, but only 3 GB are used.
How can I use all my 4 GB of RAM?
It should not be an OS problem but maybe a one BIOS.
I tried to update my BIOS (now system BIOS version 6.0).
but without success.
Thank you very much in advance,
In order to use 4 GB RAM three different factors are important.
You will be able to use 4 GB of RAM if these 3 parts provide support for 4 GB RAM.
Win 7 64 bit is 4 GB of RAM, so you should check first the capable chipset.
Check chipset in your laptop computer and research on the Intel page for details if 4 GB of RAM are supported.
If 4 GB of RAM are supported by the chipset then the BIOS does not appear to provide support for 4 GB.
I have the Satellite A100-003 and I've been running it with Windows XP since I it (triple). Now I want to install Windows 7 on it, however, I'm confused about what can I install on it.
I have a few places on the Toshiba site, I found that I can install Windows 7 (32 and 64 bit), but I can met some problems with the BIOS, in other places, I tried but could not find the drivers for Windows 7 64 bit.
So what is the case? My first goal is to install windows 7 64 bit, because I have 4 GB of RAM on my laptop, but even the 32 bit would be a better choice than XP right now.
So I can install Windows 7 64 bit on my laptop?
Thanks in advance for any answer!
Important before installing another OS, you check the Toshiba driver download page. Satellite A100-003 belongs to the PSAARE series and is therefore not available for Windows 7 drivers. You can only get the drivers for Windows XP and Vista 32 bit.
This means that you can try to install Windows 7 because Vista drivers most also work on Windows 7.
If this isn't the case you find newer drivers yourself, maybe you can find something.
I ' v I just A100-003 with Vista, but reinstall W - XP. What driver I have to get a Fn key work properly? Only Fn + F5 (switch to VGA output) works well. I can't adjust brightness disp., sound mute or touchpad switch. Where can I find a driver for Windows XP Home edition solve this problem?
Satellite A100-003 is a part of the PSAARE series. I visited the page European driver of Toshiba, but I found only the acoustic silence, help them and the driver sound
Other XP drivers are not available.
You can try to download and install the tools (Touch Pad on / off Utility, Hotkey Utility)
etc.) Another A100 series I don't know but maybe it will work if you do not have to give up this feature m
I want to upgrade my OS to Vista 64-bit, but I can't find it anywhere
I want the functions to work such as media buttons (stop, play,... etc.)
I got my cell phone as a gift from the Middle East, and now I'm having hard to upgrade
This is the Satellite A100-003
If the European driver of Toshiba page doesn t provide the driver 64 bit Vista for this laptop, then you have some many other opportunities to visit some 3rd Web sites and collect only drivers to clean hands.
After a long search of Windows XP Home edition for the satellite A100-600 (PSAAR) drivers
We found this driver works for this laptop.
Sound: use the Toshiba driver available on the download page
Chipset: Intel 945MP - driver infinst_autol.exe
NETWORK LAN: PRO2KXP.exe (Intel)
WiFi NETWORK: V220.127.116.11_XP_DRIVERS. ZIP (Intel)
Display driver: 93.71_forceware_winxp2k_international_whql.exe (NVIDIA) + http://www.laptopvideo2go.com/forum/
to change the "nv4_disp.inf" in the directory of the NVIDIA driver
Mass storage: sp33416.exe (Texas instrument) - this package contains the driver for the Texas Instruments PCI (PCI - TI) 6 x 12/7 x 12 Cardbus (card reader
Internal modem: mdm-sa100-psaa-xp-sm2162ald04-de.zip (on the Toshiba support page)
And first use Everest software for our laptop hardware information, if you do not have a PSAAR A100-600!
Hope this helps
Thank you very much for your posting. If you have more information please post again because everyday someone post the same question. If you have the time thanks for posting your description under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22425
Hi dear all
gently, I need xp PRO drive modem Satellite A100 - 011 PSAARE OR what is the way to install it.
Thanks & best regards,
you need a modemdriver for XP? Where you are looking for?
Maybe you can find the driver you need here:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp (European site Tosh)
http://18.104.22.168/support/download/ln_byModel.asp (Toshiba Canadian site)
All the hy
When I recently downloaded new drivers from the Toshiba support page, I noticed that there is NO BlueTooth stack by Toshiba software! After an hour of research I found on this URL:
Please, fix this...
Oh, I have a Toshiba Satellite A100 - 599 (PSAAR)...
Best regards, Tadej
Next time before spend you hours for research post here and you will get useful tip. ;)
My Toshiba Satellite A100-049 (PSAAR) came loaded with Windows Vista Home Premium.
On each occasion my computer boot the, "record of Vista has stopped working" message.
Here are the details of the error message below.
Anyone have a similar problem or have a solution to this problem?
Problem event name: CLR20R3
Problem Sig 01: Toshibaregistration.exe
Problem Sig02: 023.0.2538.28272
Problem Sig03: 45801f61
Problem Sig04: System.Managment
Problem Sig05: 22.214.171.124
Problem Sig06: 4536f344
Problem Sig07: 111
Problem Sig08: 123
Sig09 problem: access to the authorization system
Local ID: 6153
This happens especially if someone install a clean Version of Vista.
Please call Microsoft. You must activate Vista by phone.
As far as I know the phone call is free. After that it all works again.
Maybe you are looking for
I have a x 201 2 years, which has worked perfectly until I hit the/milk/sugar on the keyboard a few days ago. I mostly recovered, flushed with keyboard, palmrest and chassis, but remains an embarrassing problem - I can't keep my x 201 stopped while i
I'm unable to remove items from the Inbox
When I run Vista, I receive a notice that two programs in the startup group were "blocked". By clicking on the display, one of the programs is QTTask.exe by Apple, and the other is EULALauncher.exe. The size of the file is 17920 bytes, and there is
The application youtube for the ps vita is the source of many problems and all sorts of problems for me... the main issue he won't let me write reviews... Please solve this problem as soon as possible... Please. I can't take more of this nonsense th
I have a database of simple html5. It works on browser (chrome/safari) but not in the emulator. If after having included the html5_init.js file does not work on an os device five? I also simulated a sd card, so this isn't a problem, why it does not w