Satellite A100-003: Question about RAM and recording model number

Dear Sir/Madam,

1. the first problem is that I bought the notebook of Toshiba Satellite A100-003 model. But when I tried to save the European web site of Toshiba with my serial number it says Satellite A100-011. I do not understand what it means that. But I do not know my phone model A100-003-PSAARE-0470257Z. The serial number of my laptop is: 17739127G

2. Another problem is the European website of Toshiba and Turkey Toshiba official site ( says Rams are 533 MHz "2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)"but mine is at 266 MHz. "

I was wondering in Toshiba laptops of the Turkey has problems or handed in state something? I sent e-mail to the web site of Toshiba Turkey but they don't send me emails or information.

Thank you for helping me,



First of all your registration number is not a 'problem '. Maybe it s just a small mistake in their database. When I registered my P200 registration reported me another type as mine was, but after a call to the hotline of toshiba told me, that my machine is listed correctly in the database.
Don t worry, register just she.

With regard to the RAM:

Do you know why's called it 'DDR' ram? That means 'RAM memory' and the goal is to double the frontsidebus.

In your case, that means: the REAL AND PHYSICAL frontsidebus is 266 Mhz, but because the flow is double you have a 533 MHz frontsidebus (532, 34.Mhz).
CPU - Z and WCPUID are simply display the physical clock of the RAM, but the frontsidebus double the signal and then you pure and authentic to 533 MHZ.

I hope I could explain something to you. ;)

Have a nice weekend

Tags: Toshiba

Similar Questions

  • Satellite A100 PSAARA - Questions about RAM, VGA and BIOS

    I used Toshiba Satellite A100 PSAARA, now I have a few questions:

    1. I have updated the BIOS for my laptop (new version 6.0 to version 5.10): everything seems to work ok, but after I rebooted the laptop, it automatically connect a black screen with these warning "checksum bad sectors, F1: default settings, F2:..." (remember exactly).
    I pressed F1, my Toshiba reboot works ok after that, so there's something wrong with this warning?

    2. I upgraded RAM to 2 GB (1 GB + 1 GB) with the KingMax brand, if the RAM expandable max I can do on my laptop?

    3. This Toshiba laptop use to edge or video card, I check my Nvidia geforce card real estate (laptop) and I saw this: memory: 256 MB + RAM shared memory: 256 MB = 512 MB of total memory?
    So: can I upgrade my card graph and maximum card that I can use?

    4. I cannot set 75 Hz for refresh monitor, can see 65 Hz

    Thanks for your help!

    1. try to load the default settings in the BIOS. Then it should work.

    2. the Satellite A100 supports 4 GB max.

    3. No, the graphics card can not be changed. It s soldered on the motherboard and cannot be exchanged.

    4. what internal or external monitor? Monitor internal and other s LCD works best with 60 Hz.

  • Satellite A100-599 - question about updating the display driver


    I have a Satellite A100-599 with a NVIDIA 7600go graphics card and I like most of you Bioshock game crashes because of some problems with the graphic card drivers, no pb... Meanwhile, NVIDIA has released some new patches for the Forceware and after I double checked the database of the Toshiba driver support I've seen a new version in the list of display driver for WinXp.

    One of them seems to be 13/09/2007. I have downloaded the drivers, installed them and then I checked the details of the driver in the Device Manager list and to my surprise the details say that the drivers are since 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in archive of drivers and surprise... the drivers really are the 'old' of 2006. So my question is this: you have the display drivers for my model that work for Bioshock :D

    Best regards, Marian

    I Don t know if we. I think it would be took a long while to ask every single user: Hey, you have a few drivers for blackmodjo? Ah, come on, please. Some of them... ;)

    No, I have a better idea. It s like to cook a meal. Ingredients: DriverCleaner Pro and the site and... your your your TAAA patience

    To get a good 'bio' meal shocked just follow this recipe:

    read before doing anything (YES, even before you continue to BREATHE) the FAQ section on this site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
    and then download the drivers. Do it, Yes...

    Then download drivercleaner by searching on and THEN read their manual before doing anything else (Ok, you can continue to breathe..)
    After reading the manual you will be something like:

    1. program start, do something, restart the machine
    2. start in safe mode, from this program, deleting... yadayadayada
    3. install the new driver
    3. reading of Bioshock
    5. No... 6 thank. me and give me your first born... ;)

    So by cutting about 40% of my humorous things and following the constructive technical instructions from me, you will be able to play bioshock.

    Welcomes :)

  • Satellite A100-003: Questions on keyboard

    Two questions:

    1. What is the product of my keyboard type and computers laptop Toshiba have the same?

    2. can I have my extra keyboard buttons in a Linux system? (Ubuntu 7.10 Gutsy Gibbon)

    (1) the satellite A100 was equipped with a keyboard that supports 86 keys; 2 Windows keys and 1 shortcut key.
    Seems that the A100 series was equipped with this keyboard

    (2) I assume you mean the keys FN and Toshiba control buttons.
    Well, if you want to use these buttons, you will need a compatible driver from Toshiba.
    The fact is that Toshiba doesn't support Linux and doesn't provide drivers for Linux distribution. This is why you will not be able to use these keys running Linux.

    Good bye

  • Satellite A100-334: Question about upgrading from XP to Vista

    I need help to upgrade my A100-334 to vista!
    I use the disks provided by toshiba. It is said that the new Bios is already installed (vers.5.60).

    After running the second drive it says I need to uninstall Driver driver/BD DVD-RAM and Toshiba configfree.

    Then he said that the following issues will not prevent the upgrade of the execution but that some applications or elements may not work properly. The list is long.

    Here are some examples:
    Diagnostic tool for TOSHIBA, Sun Java Scheduler, TOSHIBA controls, Bluetooth TOSHIBA Power saver settings and so on.

    It is recommended to uninstall all of these objects?
    What can I do?

    I appreciate any help thanks - Detlef

    Hi Detlef

    Well, what to say if I understand your question you didn t make a new, clean install Vista, but you tried to upgrade the full XP to Vista.

    I don't wonder that this doesn't update good conduct and that you get notifications on the tools and driver compatibility issues.

    The fact is that many drivers, tools and utilities that are designed for the operating system XP don t run on the Vista operating system. That is why it s necessary and desirable to remove any programs that are not compatible with Vista!

    In my opinion, you must perform a clean installation of Vista, and then you can download and install all the drivers Toshiba Vista required and utilities.

    Best regards and greetings to Germany ;)

  • Satellite A100-529 - Question about upgrading CPU


    I have laptop Toshiba Satellite A100-529 and I want to change my Celeron M 380 for something better, but I don't know what the CPU can insert to this computer.

    When I was looking for similar templates I got same CPU with the same chipset. I don't know how to take apart my Toshiba CPU and change, I also have the latest BIOS.

    Technical details are in links with screenshots.
    What the best processor I can use on this computer?

    Thank you very much.

    [Screenshots |]


    As Akuma already written, you can choose a CPU of the other models. Look on the lower side to identify your model number.

    But don t forget that the CPU upgrade is risky. No one has tested this before CPU in your laptop and my cause overheating or something else. This upgrade is official not supported:

  • Satellite M40x-149 - Question about RAM upgrade

    Currently, I have 512 MB of RAM and want to upgrade. The jury of the RAM has two screws, should I take this and replace it with an upgrade of RAM, or leave the original in and put the new in the slot on top?

    Thank you.

    Hi RareOz,

    The amount of RAM you want after upgrade?
    If you want a maximum of 1 GB of RAM for example, you can leave the original RAM in and buy 512 MB additional RAM.

    But as far as I know M40x supports up to 2 GB of RAM, and that's why it would be necessary to install the module of RAM of 1 GB in each slot. That's why you need two new modules.

    The specification is PC2700 SO - DIMM DDR - RAM.

  • Satellite A350 - Question about RAM and Vista 32 bit - 64 bit

    I bought a Satellite A350 Tiger Direct. He moved with Windows Vista 32 bit.
    It is capable in my view up to 8 GB of Ram. Vista 32 bit does support 3.

    All reviews on this laptop online say that it came with 64-bit and 400 GB of memory.
    Mine came with only 230 GB of memory and 32 bit vista. I ran Belarc advisor, and he tells me that my computer is 64-bit ready.

    Is this true? Why is - this me came not with Vista 64 bit?
    I want to upgrade my ram but with 32 bits, which is not possible and according to Microsoft you cannot update 32-bit to 64-bit.
    So should I buy Vista 64-bit upgrade? (for around 300 euros!). Is this in any way about this?

    What are my options? I want 4 GB of Ram or more really bad...

    What Satellite A350 do you have exactly?

    AFAIK the most recent series of Toshiba laptop pre-installed a dual operating system;
    In this case, you can choose between Vista 32-bit or 64-bit.

    To obtain the 64-bit, you will need to restart the laptop and have to press F8.
    Here you must choose the option to fix my computer. Then select Toshiba HDD recovery and finally, you should see the option which would be you can toggle between the 32 and 64 bit.

    Usually the Vista 32 bit supports 3.2 GB RAM.
    Only the 64-bit Vista will be able to recognize 4 GB and more.

  • Satellite A100-225: Question about upgrade up to 4 GB of RAM

    I'm confused. Very confused.

    I myself have an A100-225 and browse the documentation, I noticed that even if it comes with 1 GB DDR2 533 Mhz RAM, the maximum memory (RAM?) system upgrade it will take is cited as an impressive 4 Gb 'Cool' think me "I wonder where this is going?".

    Now, I had computers laptops apart before--and rebuilt a little - and I have never seen one with more than 2 RAM slots. So knowing that the greatest single chip RAM you can buy for a laptop (commercially) is 1 GB, I think that there must be four locations. Open the back... No, just the usual two.

    So any ideas what I'm missing here? I've had a scout around the site of Tosh and watching it - -.

    I see the same boot - 4 GB maximum of extension. Exactly how do you what to do next? Or am I confused with something else?

    Help. And thank you all.


    Hi guys

    Of course, memory 2 GB modules are available right now and not in the future.
    You have to search only in the net for memory 2 GB PC2 - 4200 DDR2 - 533 SODIMM.
    To my knowledge this unit supports the PC2-4200 DDR2-533 SODIMM these modules and modules are available for example on the Kingston site.

  • Satellite T110-121 - Question about disk and hard drive recovery


    I started to use my nice new Satellite T110-12. How can I create a recovery disc?

    Why is there that a common message on the vibration has been detected, HDD head has been moved to a safe position? Is there something wrong? I would return it before the week is up?

    Please answer, thanks a lot a lot!

    Hi LindaMon,

    > How to create a recovery disk?
    What about reading your user manual?
    You need a 8 GB USB key for the creation of a support recovery and preinstalled Toshiba Recovery Disk Creator.

    > head drive has been moved to a safe position?
    Yes, that's normal and everything is ok with your laptop. Your HARD drive will be protected by HDD/SSD Alert utility which is a nice feature of Toshiba to avoid accidents of the head and can improve the lives of the internal HARD disk.
    But yoou can disable these notifications if you want. ;)

  • Satellite A100-049: Question about HARD disk space

    My new laptop has a 120 GB hard drive. It is partitioned into 2 drives. My question is that the C drive has only 2 GB of software on it yet it shows 18 used and only 37 GB free. Can someone tell me why it does not show 2 and 55 GB free.


    > My question is that the C drive has only 2 GB of software top

    I put t believe that! Always is that the device was shipped with Vista or am I wrong?
    I installed Vista on my laptop and the Vista installation needs about 17 18 GB on the HARD disk. Then why you are suggesting there is only 2 GB?

    You said 37GB free on the HARD drive. For me it ok s. 55 GB GB 37 GB = 18
    What's the problem?

  • Satellite A215-S7422 - question about RAM upgrade

    I have a Satellite A215-S7422 series. I want to spend my RAM from 1 to 4 GB because it s expandable to 4 GB. Now, I'm not 100% computer sauvy, but I know well. I read on some people, upgrade to 4 GB and THE reading system BIOS only 3GB or the system does not start or performance becomes really slow, then faster due to the amount of RAM. In all the words, I wonder - is it ok for me to upgrade my series being expandable to 4 GB. I was going to buy 2 x 2 GB RAM sticks of Kingston. There is the link, is this correct? Here are the specs of the system:

    The AMD processor brand
    AMD CPU and memory processor brand
    Technology class processor Turion 64 X 2 mobile
    1.9 GHz processor speed
    1 GB installed memory
    Memory 4 GB maximum
    Memory DDR II SDRAM technology
    Cache size 1 MB

    Storage Hard Drive capacity 160 GB
    Included disks DVD ± RW (±R DL) / DVD-RAM
    Write speed 24 X CD
    CD 10 X rewrite speed
    Read speed 24 X CD
    8 X DVD read speed
    Write speed of DVD 8 x (DVD±R), 4 x (DVD±R DL)

    Display and graphic display size 15.4 in
    Display Type TFT active matrix
    ATI Radeon X 1200 graphics card processor
    Resolution 1280 x 800 pixels


    If a computer has 4 GB of RAM installed module, the user can use 3.0 3.3 GB only. It is the restriction of the CPU of the 32-bit mode.
    Please visit

    If please do not worry and upgrade RAM on your machine.

  • Question about Subzones and records by proxy

    I'm tinkering with my Jabber/Movi deployment.  We are inscriptions of the transmission by proxy via VCS - E in VCS - C.

    The thing that I noticed however is that proxy records don't seem to obey our rules of subzone - they always end up in the subzone of default on VCS - C.  I use the same exact alias registering on the VCS - C internally and it goes into the subzone very well.

    When I check the proxy on VCS - C record, the alias is the same as if it was recorded directly.

    Is this expected behavior, or my subzones VCS - C would work for registration by proxy?

    Hi Nick,

    It's true! You cannot save a customer to a subarea in VCS control when registering through VCSe record proxy.

    If you try to save jabber in the subzone of the VCS control to use control of bandwidth, I suggest you to configure bandwidth limiting in your "sub-area of course' in VCS control to control the bandwidth for these endpoints registered through recording proxy.

    In general, I don't like much to the use of proxy registration, because there are some limitations, like the cash call license when jabbers on the internet ask each other.

    If there is no particular reason to use registration by proxy in your environment, I suggest you sign up on the internet directly to VCSe jabber customers.


    Paulo Souza

    Please note the answers and mark it as "answered" as appropriate.

  • Satellite P100-429 - Question about fans and ACPIs etc.

    Hi all

    I have read a number of thread on this forum regarding the work (or not!) with the P100 series fans.
    I use Ubuntu Feisty (7.04) I've updated my DSDT with a custom compiled version and also uses the version 3.30 BIOS... I had to do in order to get the sound working on this laptop.

    However, I noticed that the fan on the left side of the laptop never turns under Linux. It turns on with XP.
    The fan at the back of the computer seems fine no lights when the CPU is running...

    What is the GPU fan?
    Nobody knows if this will be quickly resolved... I raised a few applications support with Toshiba in the hope that it will make a difference.

    Also doesn't someone at - it will suspend / hibernate works correctly (i.e. sound and networking works when he took over)...

    Thank you

    This will not work, im have the same Toshiba model. The BIOS has a big problem and it's bugged.
    IM tested all combinations, no results.

  • Satellite A100 - 003 PSAARE - Ram upgrade question


    I have a Satellite A100-003 (PSAARE) Windows 7 Home Premium 32-bit installed and 2 GB of RAM (1024 + 1024 DDR2 533 MHz).

    I want to improve my system with 2x2gb DDR2 667 MHz Ram.
    When I use 2x2gb Rams, my system recognizes them?
    Or he will recognize less than 4 GB?

    Is there a link between the ram and 32 bit OS?
    What are your suggestions?

    Thank you.

    > When I use 2x2gb Rams, my system recognizes them?
    > Or it will recognize less than 4 GB

    You use the 32-bit Windows System. This means that your Windows operating system can recognize 3.2 GB of RAM max. It's max possible RAM for 32-bit systems.

    But as far as I know that it takes in charge max 2 GB of RAM. Has been mentioned in the page manual user 22 and 33

Maybe you are looking for

  • Satellite A210 - 16F PSAELE - always CPU 800 MHz instead of 1900

    Hello! My Satellite A210-16F (PSAELE) * still works with 800 MHz instead of 1.9 GHz *-even though I select the profile of full power. I reinstall Windows, but it did not help :/ Core temp tells me only 50 C temperature.If I try to run one last game i

  • Scaling DAQ Assistant

    I'm looking for help with the DAQ assistant, I have a signal 0-20 my. I want my card 8 to 100 and 16 my to-100. I entered y =-x + 300 25. I put I. Max = 300 (x = 0 my) and AI. Min = - 200 (x = 20 my). I get the following error: Error-200077 occurred

  • HP 255 G2

    Hi, I recently bought this laptop and I would like to know if it has 2 DIMM memory modules. It is possible to have only a single dimm (single channel)? It would cripple overall laptop performance. Thank you. PC: AIDA64 v4.5 reports that only dimm2 is

  • Use sysprep for activation?

    My computer system has been implemented with an upgrade of Vistap after the initial installation of XP.I need to do a reformat, but want to be sure of the activation procedure with the upgrade installation.I was told to use the system preparation too

  • Several repeated copies of an e-mail sent

    Hi, I sent an e-mail to someone and for some reason any for the past week, the copy of the email sent is appeared in my inbox sent every 5 minutes there are thousands of copies, please help I don't know what I did, or more importantly, how to stop...