Satellite A100 - 011 PSAARE: utility for Vista allows only 3 partitions

Similar Questions

• Satellite A100 - 011 (PSAAR): where to find the drivers for Windows XP?

  Hi all

  are there opportunities to find windows XP drivers for my Toshiba Satellite A100-011 (PSAAR).
  in order to remove vista and install XP?

  Thanks in advance,
  Alex

  Hello

  Maybe this topic can help you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20083&MessageID=76256

  By the way: If you check this section of the forum you will find several topics where you can find answer to your question.

• Satellite A100 - 011 PSAARE: need player modem for Win XP Pro

  Hi dear all

  gently, I need xp PRO drive modem Satellite A100 - 011 PSAARE OR what is the way to install it.

  Thanks & best regards,

  Hey Buddy,

  you need a modemdriver for XP? Where you are looking for?
  Maybe you can find the driver you need here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp (European site Tosh)

  http://209.167.114.38/support/download/ln_byModel.asp (Toshiba Canadian site)

  Good luck
  Greetings

• Problem upgrading to Satellite A100-011 (PSAARE) RAM

  I have the Satellite A100 - 011 (PSAARE) and I just upgraded memory RAM of 4 GB 2x2gb Kingston (KTT533D2 / 2G).
  BIOS can see all my 4 GB installed, so my windows (x 64) but my task manager shows me 3069 Mo!
  How is that possible? Is it possible to fix this? My BIOS version is 6,00.

  Thank you!

  Hello!

  Are you sure that you have a 64-bit version of Windows XP?
  I ask this question because the Web from Toshiba website does no drivers for Windows XP 64-bit.

  If you really have a 64 bit OS make sure that you have installed all Service Packs and patches from Microsoft.

  And install a program such as Everest and watch this program shows the amount of RAM.

  Good bye

• Setting the mode BIOS LBA - Satellite A100 - 011 PSAARE

  I have the tool 'EASEUS Partition manager', and when I start this tool, I have an error message "Manager Easeus partition detected an error on the disk 1" "start LBA value partition xxxxxxxxxxxxxxxxx is invalid". "." Using the tool says:
  --------
  Change the BIOS LBA mode setting

  CAUTION: Never change the LBA mode in the BIOS of your system once the data are present on any hard disk. Changing this setting can cause loss and alteration of the data.
  More modern designs of BIOS system supports LBA or Logical Block Addressing. The LBA mode no definition, no matter enabled on your system, or not, determines how your computer translates logical addresses cylinder-head-sector (CHS). If you change this setting, shift resulting in the CHS values may corrupt the files and partitions on your hard disks.

  If you must change the setting of the LBA mode in the BIOS of your system, first back up the data on your hard drives. Contact the BIOS and/or support services of the drive manufacturer to make sure that understand how to proceed safely.
  -----
  Can someone help me?

  Thank you very much

  Hello

  The LBA can be enabled in the registry of the Windows XP operating system!
  Microsoft has released the paper support and the guide line;
  http://support.Microsoft.com/kb/303013

  The LBA allows a computer treat a disk HARD more than 528 megabytes.
  Logical block addressing is one of the defining features of the IDE improved HARD drive interface.

  If you wish, you can read some details here:
  Logical Block Addressing (LBA) defined
  http://support.Microsoft.com/kb/q122052/

• Need driver for Win XP for Satellite A100 - 025 (PSAARE)

  I have a toshiba satellite a100-025 (psaare) with windows vista.

  I want to download drivers for windows xp because I have a licensed version of the software with sp2:
  I don't have vista linke because it uses too many resources of the nucleus and too many areas of memory.

  So I want drivers for xp but I can not download ' em, because I can't find my model of laptop in the download page of the site.

  My question is: How can I get drivers for Windows XP?

  You re right Antonio Luigi

  Now your laptop is not in the form of Windows XP driver :(
  But don t worry and be cool B-)

  It seems that Toshiba updates pilots and published the new version every day.
  I think that next time, you should be able to download the XP drivers for your laptop.

  But if you want, you can test the drivers from another series of Satellite A100 Equium A100.
  I think that these books are very similar, and possibly unique pilots will run

  By the way; It of very funny because many people want to update to Vista and XP not to downgrade Vista to XP.
  However ;)

• Satellite A100-011 - Bluetooth not working after installing Windows 7

  Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

  I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

  Let me add that the WiFi is working normally.

  Hey,.

  I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

  Check Toshiba Bluetooth portal for the latest versions:
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Satellite A100 - 049 (PSAAR) - registration of Windows Vista has stopped working

  My Toshiba Satellite A100-049 (PSAAR) came loaded with Windows Vista Home Premium.
  On each occasion my computer boot the, "record of Vista has stopped working" message.
  Here are the details of the error message below.
  Anyone have a similar problem or have a solution to this problem?

  Problem event name: CLR20R3
  Problem Sig 01: Toshibaregistration.exe
  Problem Sig02: 023.0.2538.28272
  Problem Sig03: 45801f61
  Problem Sig04: System.Managment
  Problem Sig05: 2.0.0.0
  Problem Sig06: 4536f344
  Problem Sig07: 111
  Problem Sig08: 123
  Sig09 problem: access to the authorization system
  OS Version:6.0.6000.2.0.0.768.3
  Local ID: 6153

  This happens especially if someone install a clean Version of Vista.

  Please call Microsoft. You must activate Vista by phone.
  As far as I know the phone call is free. After that it all works again.

• Need drivers card network for Satellite A100-011

  Hello. I have problems with my Toshiba.
  The model is Satellite A100-011. I saw my problem driver support center and download both of them, but the problem is always the same.

  Can someone help me please?

  Hello

  Which driver Lan do you need? And what problem do you have?
  Unit makes you part of the PSAAR series and I found two Intel XP LAN drivers on the Toshiba driver page.

  The laptop supports LAN Intel 82562GZ chip.
  You can also download the compatible drivers on the Intel page!

• Windows XP for Satellite A100-011 mass storage drivers

  I installed Windows XP for my satellite A100-011 and
  Mass storage is an unknown device
  I do not have function keys bar

  Hello

  so downloaded drivers for this machine? If not, then here are some links where you would probably get the drivers, you must:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  Toshiba - download

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
  ToshibaUSA

  http://209.167.114.38/support/download/ln_byModel.asp
  Toshiba of Canada limited - drivers and downloads

  Hope you find what you need...

  Welcome them

• Windows XP Home for Satellite A100 - 600 PSAAR edition drivers

  Hi all

  After a long search of Windows XP Home edition for the satellite A100-600 (PSAAR) drivers

  We found this driver works for this laptop.

  Sound: use the Toshiba driver available on the download page
  Chipset: Intel 945MP - driver infinst_autol.exe
  NETWORK LAN: PRO2KXP.exe (Intel)
  WiFi NETWORK: V11.1.0.0_XP_DRIVERS. ZIP (Intel)
  Display driver: 93.71_forceware_winxp2k_international_whql.exe (NVIDIA) + http://www.laptopvideo2go.com/forum/
  to change the "nv4_disp.inf" in the directory of the NVIDIA driver

  Mass storage: sp33416.exe (Texas instrument) - this package contains the driver for the Texas Instruments PCI (PCI - TI) 6 x 12/7 x 12 Cardbus (card reader
  Internal modem: mdm-sa100-psaa-xp-sm2162ald04-de.zip (on the Toshiba support page)

  And first use Everest software for our laptop hardware information, if you do not have a PSAAR A100-600!

  Hope this helps

  Concerning

  TOTO

  Hello Toto

  Thank you very much for your posting. If you have more information please post again because everyday someone post the same question. If you have the time thanks for posting your description under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22425

  Thanks again!

• I lost my cd of restoration for Satellite A100-011

  I lost my recovery cd I have toshiba satellite A100-011, where can I find a new one in Turkey

  Hello

  You can order the new CD from recovery of the local ASP in Turkey.

  Contact the guys in your country and order a new one.

  Want to know where the ASP nearest in your country?
  No problem. Check this path and you will find a big ASP database.

  * http://eu.computers.toshiba-europe.com-> support download &-> find an authorized Service provider *.

  Good bye

• Satellite A100-011 graphics card replacement

  Recently, I've had graphics GeForce Go 7600 in my laptop Satellite A100-011 beloved suffer damage because of the known problem with mobile bumps thermals in copper on the series GeForce 7/8/9 of the graphics chips. :_| I work at HP and get us a large number of these problems too, hope that Nvidia burn for this. Map is now partially defective, 3D is completely busted, but at least 2D works for now.

  I had almost the same problem a year and a half when the laptop comes out the guarantee and I brought to ideal electronics, it is the company that provides the service for Toshiba here in Athens, Greece.

  They were very kind to this topic and allowed me to buy an additional warranty year whereas they might change my free graphics card. I took a snapshot of that card faulty chart, they replaced, here it is:
  http://img357.imageshack.us/i/12062008gq8.jpg/

  However, when I went today at the same company for the second time after that the second card suffered the same fate as the first, I was not so lucky. This time there is a kid who tried to convince me that the graphics on this model cannot be changed without changing the whole motherboard.

  I tried to explain to him that they have already changed graphics in my machine without changing the Board of Directors, but he was holding with arrogance its soil, then I turned and left, like changing the Council too would cost more that this laptop is worth.

  The only option for me if I want to save this laptop is somehow, get the graphics card, and change myself. The problem is that Toshiba does not publicly list the parts reference numbers in their laptops, or if this is the case I of course was not able to find it. If someone could find the part number of the GeForce Go 7600 card in my laptop I would be very grateful, because I have to disassemble the laptop everything to check on a sticker on the card itself. Also, if you know some other card compatible with this laptop, I'd be happy to hear about it. In addition, if you know an online retailer who delivers the Toshiba laptop parts at the international level it would be a great help.

  My product number is PSAARE-04800VGE. If I'm not able to change the graphics on this laptop, I use it as a web browsing machine until a graphics chip dies completely.

  Hello

  To my knowledge, the graphics card is not replaceable. It s part of the motherboard and you need to replace the whole motherboard if the graphics card is dead.

  Unfortunately, but in my opinion there is nothing to see.
  You will need to change the whole mobo.

• Satellite A100-011 - RAM upgrade

  Hello

  I have laptop Satellite A100-011. And I want to improve his memory. It has 1 GB of ram DDR2 533 hz. My questions are the following;
  1. how many ram slots have?
  2-can we add 2 GB of ram DDR2 533 hz more, if so, will total 3GB? Or shoud I replace 2 GB 1 GB?
  3 - ? It s possible to use DDR3 Rams or different frequency as 800 Hz?
  4 - What brand should I use to upgrade? Kingston etc?
  5 - ? f I upgrade the memory of my laptop, can I install windows7 32 bit (I have windows vista at the moment)

  Thanks in advance

  Hello

  I'll try to give you some answers:

  # According to specification of laptop there two RAM slots
  # Your laptop can handle with 4 GB max, then you can do whatever you want and it depends on how much RAM you want to have inside. You can buy a module of RAM of 2 GB and 3 GB of RAM. That should be enough to work with Vista or Win7 even. Of course, you can upgrade to maximum and buy 2 X 2 GB.
  # It has no meaning at all. If the speed of the FSB of your motherboard is 53 MHz why use 800 MHZ modules. Your laptop will not be faster because of Rams with more MHz.
  # Yes, Kingston product high quality and using Kingston modules, you should not have compatibility problems.
  # I put t see any reason why you shouldn't be able to install Win7, but before this visit Toshiba support page and check if your phone model is supported for Win7.