Satellite A100-062 - USB mouse does not work

Similar Questions

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Satellite A100-1011E - AV button does not work

  Hello world

  I'm new here but I have an urgent problem. I hope that you guys can tell me what to do. I have this laptop SATELLITE A100-1011E model. My AV button which located on the left side of the keyboard does not work.

  I'm sure that it works always 3 days ago, but I don't know what I did and it doesn't now. I n it's a driver issue cause I just bought this phone 5 days ago. I checked with this 'Toshiba' commands in the Panel and I've assigned to the right program (windows media player 10) but it does not work when I press a key.

  Can someone help me with this? :( Thank you very much.

  Hello

  Until you try anything roll back OS to an earlier time using System Restore tool. Maybe it will help you.

  If this don't work let us know.

• Satellite A100-062: FN keys do not work after turning off the Flash map software

  Hello

  I just got an A100-062 with Vista. I don't have as so disabled flash card software he. However then the function keys don't seem to work. How can I maintain the functionality of the FN keys, but do not have this software running?

  Thank you

  G.

  Hello

  What dose of the FN key features does not work?
  You are not able to use the FN keys or a particular FN + function?

• Satellite A200-13O - USB port does not work

  Can you help me? I have a new Satellite A200-13O, USB does not work.

  Hi Gilbert

  What do you mean exactly with the USB does not work?
  You plug the 3rd USB external devices advantage, which cannot be recognized?

  Have you installed all necessary drivers for these devices?

  What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

  Please post more details!

• Satellite A10 s203: USB ports does not work

  Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

  Hello

  If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

  Good bye

• Satellite A100: Toshiba Power Manager does not work

  Hello everyone!
  I just installed Vista on my laptop (originally I had Win xp on it)
  First I installed video drivers from toshiba.com
  Then I installed the bios update and additional package toshiba.
  But the toshiba Power Manager does not work!
  Vista uses only its tools to manage the battery.
  Can you help me?

  Thank you!

  Why do you offer the Power Saver doesn t work properly?
  You are getting error messages or what?

  The Toshiba for Vista energy saver is not the same as for Win XP.
  You can find some additional options in Vista power options!

  There, you can choose between 3 different power option.
  Choose one and click on the link below changes the power options

  The new window should appear and you can click on change advanced power settings link.
  In a new window, you can see the Toshiba Power Saver Settings.

  Good bye

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• Satellite M300 - left USB port does not work

  Hey,.

  I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

  Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

  Any advice? Thank you very much!
  Dan

  Jin

  I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

  Greers

• Satellite A100 - 906 internal LCD does not work

  Hello, I have laptop Toshiba Satellite A100-906, and I struggle with internal LCD. Only three gray belts are displayed with horizontal lines or without. Backligt works. External monitor works.
  Initially, the screen freezes sometimes but after short time continue to work. But now is still dead.
  What is defekt? LCD or graphics card? It's the Geforce Go 7600 with 256 MB.

  Help, please.

  > External monitor works too.
  You said that external monitor is not affected. Right?

  Well, in this case I think that the graphics card is OK and the problem is related to the internal display.
  If the graphics chip would be affected, both screens would not work properly.

• Logitech USB mouse does not work after the upgrade to Windows 7

  I have a HP Pavilion DV6XXX laptop computer series (MS Vista Home Premium has been loaded from the factory), recently updated with Windows 7 Home Premium.  It is then this problem began.

  Wherever I am, everything I do (typing, surfing, reading) my cursor made a break of about 3 seconds, 26-28 seconds.  This interruption is making me crazy!  Everything what I'm typing, the cursor becomes unavailable for 3 seconds.  Everything I typed is gone.

  My laptop has a touchpad, but I use a Logitech USB mouse.  I can't disable my touchpad, but that does not change.  In addition, it is matter if I type or not: my cursor disappears for 3 seconds, 26-28 seconds.  I can sit and watch it.  I have disabled the touchpad, unplugged the USB mouse, find the updated HP drivers and Synaptics to nothing does not.

  Looking for other suggestions.

  Original title: cursor refreshes frequently

  Hello

   
  Thanks for posting your query in Microsoft Community.
   

  I understand that you have problems using the mouse effectively on Windows 7 computer.

  (1) what is the Logitech mouse model number?

   

  In the meantime, please follow the following suggestions to solve the problem.

   

  Method 1: Try to put your system in a clean boot state, which helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Referring to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after troubleshooting.

  Method 2: You can follow the link and identify and correct the mouse, touchpad and keyboard problems in Windows.

   
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows
   

  Method 3: If the above does not help then, try to get the latest drivers installed for the mouse and see if that helps.

   
  Support

  http://www.Logitech.com/en-us/support

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
   
  Thank you

• On the Satellite A100-784 Internet connection does not work

  I use a Satellite A100-784 with Vista Home Basic and a US Robotics router. My question/problem is that when I discover the network connection, it shows I am connected to the router, but not to the internet even though I am.

  It is a quirk of the Vista operating system or is it normal if you use a router? Should I worry or not?

  Thank you all in advance and my apologies for the newbie question.

  Each router must be configured and the right data ISP (internet service provider) must be inserted.

  -Don't configure you the router?
  -How about the TCP/IP settings? All the settings are set to automatic?
  -How about firewalls? Have you used one or you turn it?
  -Have you tested different browsers?

  Please check the points above.

• External USB mouse does not work in the context of Satellite L

  Hello, my name is John Cooley, and I have a problem that your FAQ do not have a category.

  Because I've had this laptop as a gift in October 2011, I was using a mouse that was provided by the company, by that I was hired and in no time I had no problem with the mouse.
  I'm no longer with this company and have not been for the past ten weeks, but it's not my problem.

  My problem is that for some reason any after working properly for about two minutes, I get an error message indicating that the USB hubs on the right side of my laptop will not recognize the mouse which is very annoying, because I am also using a dongle for access to the internet using these same hubs (which by the way (, never having this problem) because it works in all USB hubs without problem, what I can do.

  My question is not why this is happening but what should I do so that I can use the mouse.

  Please don't suggest I have stop using the mouse and rely solely on the touchpad.
  Unfortunately for me I find using the key exercise lose more time because I don't have three hands and that's what you have to do everything done a mouse.

  With respect,

  John Cooley

  Hello John

  On this virtual path, it is not easy to say what the problem is here. Before you begin to discuss your problem, please, let us know what model phone you have and what operating system is preinstalled.

  Have USB ports for laptop on the left side?
  Have you tested?

  I also want to know is: do you have this problem USB I have general or simply using this external mouse? I mean, have you tested with some USB memory stick or GSM connection by USB cable, not only the dongle to access internet?

• Satellite A135-S2286 - USB ports does not work after BIOS update

  I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

  When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

  It will be useful, if someone has a solution for this error.

  Hey Buddy,

  Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

  If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

  I hope that it helps :)