Satellite A100-153: Adobe Premiere blocks - BSOD

Similar Questions

• Satellite A100 - 153 (PSAA9E) - how to update display drivers?

  Hello!
  I need a current display for my ATI Radeon Mobility X 1600 driver in my laptop Toshiba Satellite A100-153 PSAA9E.

  I can not install the Catalyst Control Center (and therefore the latest driver). It says to me "this driver is not compatible with your system. Contact the manufacturer.
  In the magnificent... download section are the only drivers of 2006 for my X 1600. Anyone know how I can install current drivers? Is it possible to avoid the 'blocking of Toshiba' for display drivers?

  Thanks in advance

  Hey Buddy!

  The display on the original ATI site driver is not designed for graphics cards for laptop and so that you can install t. In addition he doesn t have an overheating protection and therefore can damage your graphics card! It s on your own risk!
  If you want the ATI driver, you must use Mobility Modder. Then you can install it, but don t forget s about your risks and perils and you will lose the warranty.

  The drivers from the Web from Toshiba site definitely work for your laptop then why you want to install a different driver?

  Good luck!

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite A100-153 is going on but then nothing happen

  Hello

  My Toshiba Satellite A100-153(PSAA9E-00D006GR) going on but then nothing!
  Nothing is displayed on the screen, no beeps, no flashing!

  I plugged with monitor external, thinking that the display was damaged but noway!
  I brought in an experienced friend who told me that it would be likely that the graphics card (ATI Mobility Radeon x 1600) has been damaged.
  Why not the CPU?

  Does anyone have any experience with such a model of Satellite with similar problem?

  Please help and thanks in advance

  Hello

  To me, it looks like a serious hardware problem but I n t want to speculate what part could be affected
  Your friend said it could be a GPU (graphics card), but I think it's only a hypothesis and it could also be a CPU problem or card problem or mother or other material, a part

  I think that nobody will be abele to say what part failures without performing detailed diagnostic tests
  I think you agree with me

  What you can try to do is this short workaround:
  -Disconnect the power adapter and remove the battery
  -wait a bit (1 h >) and reconnect the two part
  -try to turn on the laptop

  If it does not, then, the unique physical part should be checked
  I think that this can be done by a technician laptop because these guys have had enough resources to run these tests

• Satellite A100-153 starts only occasional

  Hello

  I have a big problem with my Satellite A100-153. It does not start regularly. When the laptop is turned off and I want to start again, I can press the button and the fan will also and it seems to start but the screen remains black. I can repeat this several times. When I have the chance to try it suddenly works and Notepad starts and I see "Toshiba" Logo
  I see no reason for this odd behavior. It may be that it works really well and then I do a restart and then failure appears. All of a sudden. Without changing anything same not the position of the laptop. It is really strange.

  My warranty went for years and so I don't know if I have to give it to a local repair service or if I should send it to Toshiba. Does anyone know how expensives who can get?

  I don't know where is the problem. The display becomes competely white/white stripes sometimes appear. So I think it could be the graphics card but it works as long as I get it to start. And I also watched inside the laptop and everything seems to be fine.

  Maybe someone can help me or give me advice on the service costs repair Toshiba in Germany.

  Matrix

  Have you tried reseating the memory Modules?

  You can test the RAM with Memtest (CD Bootable or FD) of www.memtest.org

• Satellite A100-153: is my 64-bit processor?

  It's maybe a stupid question, but I'm not good with knowledge when it comes to material...

  I have the Satellite A100-153. It is the processor of Intel Centrino Duo T2300 1.66 GHz. So I want to know is my cpu 64 or 32-bit? Also, if it is 64 bits, what are the benefits of this type of CPU?

  Thank you!

  No, the generation of your Centrino has no EMT64 (64-bit). The next generation whose production began in March of this year is now 64-bit.
  The new CPU´s have a similar heart as the "Core 2 Duo".

  Thus, the benefits of the 64-bit are apparent, you have a wider bus which can process more data at the same time. And the treatment of the data at the same time average speed of treatment.

  But there is just one little problem: the driver support for 64-bit operating systems is not very good aren´t and there are a lot of programs for us end-users that are written in 64-bit. So we have to wait until software developers and manufacturers of chips are better than now.

  Welcome them

• Satellite A100-153: where to get the CD from drive Media Express?

  Hello

  Sorry I Cana´t speak English, but I'll try to explain my problem maybe someone can help me.

  I have a toshiba a100-153 with multimedia function. I can watch DVDs without starting windows with Media Player express.
  My problem is: I installed windows xp professional (I had windows home edition) but I Didna´t delete the partition of express Media Player. Now I Cana´t use the Media express player.

  The express media player cd recovery is damaged (distroyed) now and I have not any possibility to reinstall MEP.
  Can I have a new have toshiba MEP, or try something to repair the MEP. I searched the internet but I have not found such software by download.

  Thank you

  As far as I know it of not possible to download this program.
  The installation CD will come with the laptop.
  It of possible to order the CD of the partner of Toshiba service in your country, if the CD has been damaged or if you lose the Media Express CD player.

  The necessary connection at the base of the ASP in the world, you will find on the Toshiba support page.

• Satellite A100-153 does support IrDA (infrared)?

  Hi all
  I recently bought a Toshiba A100-153. My problem is I don't seem to have an infrared connection and I find no infrared driver for this model that I can use.
  When I go to Device Manager I don't see any device for IrDA. And if I go to the Control Panel, there is also no specific infrared configuration. But the manual says that this model A100-153 has an IR port, and I see the Port on the front of my laptop (Dummy!)
  Is there a driver I'm missing or if IR is not supported with this model (even if it have Ir Port)?

  Best regards
  Andra ©

  Hello

  Check if Device Manager there is no entry of IrDA.
  If support for laptop computer and IrDA port so it should appear in the Device Manager.

  I downloaded a user manual and I found information that the port is provided only on some models.
  Maybe you unit doesn t support this port.

  I also found information that some units have been delivered with the remote control.
  That's why the remote control uses the IrDA receiver window on the front of the laptop to communicate with the laptop. (It s not usual port IrDA window)

• Lock screen Satellite A100-153 and Windows login problem?

  I installed Windows XP Pro with Service Pack 1, everything worked fine, but when I updated the BIOS to 1.40 (WIN) at least once a day connection Windows crashes (I can move the mouse, but can't click on my username to type the password, alo TAB key does not work). Also, now when I press the key combination Fn + F1 to lock the screen, sometimes (not always) I can't go stay right back to the black screen!
  Someone knows what can be a problem?

  Hello

  According to these document Toshiba BIOS FAQ update of the BIOS can be done with 2 different procedures:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  It is possible that you have useed the wrong or bad BIOS BIOS update procedure.
  Well, it's not easy to say why the connection of the laptop freezes. The fact is that the Satellite A100 is a laptop very new and it comes with all service packs Microsoft (SP1 + Sp2). I don't know whether you have installed the device manually, but you must use the Toshiba Recovery CD.

  I would recommend recover the laptop with the Toshiba Recovery CD and finally, you check to see if the connection problem.

• Satellite A100-153 - Notebook starts only

  Hello

  I have a problem with my A100-153. If my laptop is in the socket, its starting to go alone. Without taking the main switch.

  Can you help me?

  Hello

  This seems very odd. I guess there must be something wrong with the electronic power supply. In this case, the only way to solve it is to contact the Toshiba service partner in your country. I guess that your laptop is new and the guarantee must cover the repair procedure.
  You will find the ASP:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Satellite A100-153: Error Message appears during the recovery procedure

  Hello
  Please help me!

  I tried to recover my laptop with my original Toshiba recovery cd, but decompression 14% I got an error.., named:
  Windows - delayed write failed
  Windows was unable to save all the data for the file\Device\Harddisk\volume2\I386\OEMBIOS. Bl_. The data has been lost.
  This error can be caused by a failure of your computer hardware connection or a network. Please try to save this file elsewhere.

  So I don't know what to do...
  Is the problem that my hard drive is broken? but I don't think, because when I install with Windows XP Home Edition OEM I come up to 91% and then comes another error :((

  Please help me, anyone know what I can do?

  Please answer quickly... I need my phone tomorrow :*(

  Welcome, Tobias Erdmann

  Hello

  I guess you have you used original restore CD that was shipped with this laptop. That's why I put t thinks it is a CD problem but maybe with your HARD drive.
  Have you tried to format the whole HARD drive? Delete all partitions and format the HARD drive before installation

  If the OS install will not work or will divide in the middle of the procedure, then the material should be checked. The A100 is not very old unit and therefore the guarantee must be valid. If a new HARD drive is necessary you should get it for free.

  Good luck and please post if you know more details

• Satellite A100-153: what are verical and horizontal for my screen refresh rate

  How can - I found what verical and horizontal for my screen refresh rate?

  Hello

  Do you mean the vertical and horizontal display resolution?

  In any case all the information should be included in the user manual.
  I put t knows exactly what schedule is in him, but it should be placed somewhere at the end of the user manual.
  This information is also in my user manual that has been delivered and preinstalled on my laptop Satellite.

• Fan always on with new Satellite A100-153, even on the low-energy setting

  Hello
  I just got a new A100. Its processor is a Centrino Duo.
  I am very surprised by the general noise of the machine. I had a front M30 including fan rarely provided on but on this new machine, the fan stops.
  I changed the power settings (proc low speed + low cooling method) but that doesn't change anything.
  The CPU is only 2 or 3% and I am working not all heavy duty applications, so this should not happen.

  What is your experience with the series A100 and the Centrino Dual Core in general?

  Is that what I can do to fix this problem or am I condemned to hear this stupid fan 24/7?

  Hello

  It is not easy to say why the fans run constantly.
  This problem occurs on new recovered BONES?
  In addition check you the version of the BIOS. If the most recent BIOS is available on the Web from Toshiba page so try to update. But I'm not 100% sure if it will solve the problem of fan.

• Satellite A100-153-backlight and power button instability

  My screen tends to turn off the LCD backlight during operation, although I chose 'Never' in the Toshiba Power Saver lcd-fork-functionality.

  However, all this is pretty weird:
  1. when the screen becomes 'black' I can indeed still see things, but only forms of contrast of course.
  2. the screen still updates the image; This I know, because it happens to get black during games and I can still navigate through the levels, well that heavily handicapped.
  3. If I close the display and reopen it, the screen lights up again. However, if I wait about 10 seconds, he does the same. However, it is quite a nerve, because sometimes it goes black several times in a few minutes.

  In addition, my powerbutton is a bit shabby. He reacty that if I press a destinctive of the key point, which changes its location over time. Sometimes - where can sometimes mean a few months - it reacts at all and I have to turn on the machine by pressing the media buttons. I got it to the local service company partner several times, they even changed the card mother once, but error THAT was less never get rid of.

  Anyone no matter what tipps on these things?

  On the first question, I can only say that you can try to fix it with the BIOS and update the graphics driver.

  What about the second question? If the service has no solution, and they had the laptop at hand, what to expect here where we just try to imagine what happens exactly.
  Boyfriend sorry but I don't see any way to change anything.

• How to clean the fan on the Satellite A100-153

  Hello

  First of all, my warranty on this laptop is expires.
  My laptop runs hot and that's why I want to clean my fan module.
  Where can I find documentation, how do I open up my laptop?

  I despaired of m, because I don t find anything in the WWW.

  I hope that there is someone who can help me.

  Thank you
  Salva76

  Ciao, Salvatore

  Personally, I would not recommend disassemble the laptop to clean the internal cooling fans.
  Such procedure is really complicated and I think that it s too risky for someone without any computer laptop disassembly experience.

  But not don t worry. You can clean the cooling modules without opening Notepad.
  I clean my fans for laptop with a jet of compressed air.

  These dust cleaners are very useful and you can very easily remove dust using these tools.

  Just google for vacuum dust or compressed air and you should find enough examples and offers online.

  Cheers mate