Satellite A100-220: is it possible to extend with the WLan functionality?

Similar Questions

• Satellite A100-220 - she goes to zero just after the start

  Hello

  someone gave me this laptop reinstall its system and it used to work

  but now he is repeatedly to restart after you turn on - just after a few seconds it is restarting again. You can hear hard disk starts to spin, keyboard LED flashes once, display is still off however. And then restarted once more. He tries it 5 or 6 times and then turns off.

  I don't know what it is. I checked the memory. Is there a somewhere cmos battery on the motherboard to reset the BIOS? Any ideas what I could do and how much it would cost? As it's not mine I feel a little more troubled now.

  I thank in advance
  Oliniusz

  Hello

  Please power laptop, and then press F8.
  Then you should be able to start in safe mode.
  Check this box if this is possible

  If this is not possible, try to reinstall the new OS.
  Before you perform this default in the BIOS.

  In order to enter the BIOS, press F2 while turning on the laptop.

• Satellite A100-847 crashes when you try to change the WLan connection setings

  I bought a new A100-847, I tried to change settings of network connection wireless connection Wireless 2 - change advanced settings
  Then the computer freezes and I have to press ctrl + alt + delete to get out.

  I contacted my dealer of toshiba, they gave me another pc that has the same problem
  my network adapter intel pro 3945ABG, I've updated the latest driver same problem
  I don't know where is the problem, what I have to change to another model or there is a solution for my problem

  Strange can you please post more details? Maybe you could write the exactly steps and settings you want to change?

• SatellIte A100-220 - ATI Radeon Xpress 200 M Driver update

  Hello

  I have a laptop Toshiba SatellIte A100-220 and I can't find the latest driver for Ati Radeon Xpress 200 M, could you help me?

  Thank you in advance.

  What operating system do you use?

  I guess you know that you must use drivers from Toshiba support page. Have you already checked last version here?

• I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

  I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

  Hello

  Main objective of this forum is on Microsoft Products only.

  I suggest you to contact the support of Audacity for more direct action on the issue.

• Is it possible to rank with the condition of a group?

  Is it possible to rank with the condition of a group? for example, I have following dataset.

   
  RANK() OVER (partition BY PC.POLICY_NUMBER, PC.TRANSACTION_TYPE, COV_CHG_EFF_DATE order by PC.POLICY_NUMBER, COV_CHG_EFF_DATE, PC.TIMESTAMP_ENTERED) AS RNK,
  
  POLICY_NUMBER    TRANSACTION_TYPE  COV_CHG_EFF_DATE  TIMESTAMP_ENTERED                        Rank
  10531075PQ                           01           01/FEB/2009              15/SEP/2009 01:16:09.356663 AM       1
  10531075PQ                           01           01/FEB/2009              15/SEP/2009 01:16:09.387784 AM       2
  10531075PQ                           02           15/OCT/2009             16/OCT/2009 04:40:24.564928 PM       1
  10531075PQ                           02           15/OCT/2009             16/OCT/2009 04:40:24.678118 PM       2
  10531075PQ                           10           15/OCT/2009             16/OCT/2009 04:45:20.290117 PM       1
  10531075PQ                           10           15/OCT/2009             16/OCT/2009 04:40:29.088737 PM       2
  10531075PQ                           09           15/OCT/2009             16/OCT/2009 04:40:29.088737 PM       1 (expected 3)
  10531075PQ                           06           17/OCT/2009             17/OCT/2009 04:45:20.290117 PM       1
  10531075PQ                           07           17/OCT/2009             17/OCT/2009 04:40:29.088737 PM       1 (expected 2)

  I want to group founded by transaction ID. For ex, '09 'and '10' as a game and ' 06' one '07' as another set. Instead of the beginning rank, rank I want continue for any occurrence of the ' 09 'or ' 10'. In the example above, for the next line, I expect to grade 3 that there are transaction 2 '10' already exist for the same COV_CHG_EFF_DATE.
  
  09 10531075PQ October 15, 2009 October 16, 2009 04:40:29.088737 PM 1 (3 planned)
  
  I wonder if it's possible with the rank or another another analytic function. Not looking for exact labour code, I will appreciate if someone can give me idea/advice. Example of table and the test data, if someone wants to experience

   
  drop table PC_COVKEY_PD;
  
  create table PC_COVKEY_PD (
  POLICY_NUMBER varchar(30),
  TERM_IDENT varchar(3),
  COVERAGE_NUMBER varchar(3),
  TRANSACTION_TYPE varchar(3),
  COV_CHG_EFF_DATE date,
  TIMESTAMP_ENTERED timestamp
  );
  
  delete from PC_COVKEY_PD;
  
  commit;
  
  insert into PC_COVKEY_PD values ('10531075PQ', '021', '002', '01', to_date('01/FEB/2009','DD/MM/YYYY'), cast('15/SEP/2009 01:16:09.356663 AM' as timestamp));
  insert into PC_COVKEY_PD values ('10531075PQ', '021', '001', '01', to_date('01/FEB/2009','DD/MM/YYYY'), cast('15/SEP/2009 01:16:09.387784 AM' as timestamp));
  insert into PC_COVKEY_PD values ('10531075PQ', '021', '004', '02', to_date('15/OCT/2009','DD/MM/YYYY'), cast('16/OCT/2009 04:40:24.164928 PM' as timestamp));
  insert into PC_COVKEY_PD values ('10531075PQ', '021', '004', '02', to_date('15/OCT/2009','DD/MM/YYYY'), cast('16/OCT/2009 04:40:24.264928 PM' as timestamp));
  insert into PC_COVKEY_PD values ( '10531075PQ', '021', '005', '10', to_date('15/OCT/2009','DD/MM/YYYY'), cast('16/OCT/2009 04:40:24.364928 PM' as timestamp));
  insert into PC_COVKEY_PD values ('10531075PQ', '021', '002', '10', to_date('15/OCT/2009','DD/MM/YYYY'), cast('16/OCT/2009 04:40:24.464928 PM' as timestamp));
  insert into PC_COVKEY_PD values ( '10531075PQ', '021', '004', '09', to_date('15/OCT/2009','DD/MM/YYYY'), cast('16/OCT/2009 04:40:24.564928 PM' as timestamp));
  insert into PC_COVKEY_PD values ('10531075PQ', '021', '004', '06', to_date('22/NOV/2011','DD/MM/YYYY'), cast('17/OCT/2009 04:40:24.564928 PM' as timestamp));
  insert into PC_COVKEY_PD values ('10531075PQ', '021', '004', '07', to_date('22/NOV/2011','DD/MM/YYYY'), cast('17/OCT/2009 04:40:24.664928 PM' as timestamp));
  
  commit;
  
  SELECT POLICY_NUMBER,
         TERM_IDENT,
         COVERAGE_NUMBER,
         TRANSACTION_TYPE,
         COV_CHG_EFF_DATE,
         TIMESTAMP_ENTERED,
          RANK() OVER (partition BY PC.POLICY_NUMBER, PC.TERM_IDENT, PC.TRANSACTION_TYPE, PC.COV_CHG_EFF_DATE 
                  order by PC.POLICY_NUMBER, PC.TERM_IDENT, PC.COV_CHG_EFF_DATE, PC.TIMESTAMP_ENTERED) AS RNK
  FROM PC_COVKEY_PD PC
  ORDER BY PC.POLICY_NUMBER, PC.TERM_IDENT, PC.COV_CHG_EFF_DATE, PC.TIMESTAMP_ENTERED ;

  Published by: 966820 on October 30, 2012 19:26
  

• Satellite A100-998 - Dual View possible?

  Anyone ever have Geforce Go 7300 working in dual view with external monitor?

  The thing is that I need my external monitor as a main display and the laptop up as a secondary. Is this possible?

  I was able to set the display mode double with my laptop as main display screen, but this isn't what I want. I'd appreciate any help, because I struggled to solve try for centuries...
  My laptop is Toshiba Satellite A100-998.

  Hello!

  Of course, it of possible to adjust the secondary display as primary monitor.

  Go into the display properties > settings, then choose the second monitor. There is an option to use this device as the primary monitor and score it.

  Good bye

• Satellite A100-635: is it possible to use the DDR2-667 RAM

  I have a portable satellite a100-635 with 1024 MB of RAM DDR2-533. Is it possible to use the DDR2-667 RAM modules instead of 533 in this model? Thank you.

  P.S. I doubt because all portable satellite I've seen so far have been equipped with 533 modules by default. Still the chipset supports officially the DDR2-667 (Intel 945GM) modules.

  Post edited by: STS00

  Hello

  I'm not 100% sure, but as the site says that it won't work, I think you can trust them, and it does not work.
  But if you want to try it, please post the result here.

  Good bye

• Satellite A100-529: is - it possible to install WiFi miniPci card?

  I am a four-day-happy-user satellite a100-529. I wanted to know if it is possible to install internal mini-pci WiFi card on my laptop. I called three service providers different toshiba authorized in Poland and one of them told me that they do not know if it is possible, it is impossible and that it is possible (they have even told me the price for it).

  So I found myself alone, just confused. Can someone here help me on this?

  Hello

  I found the info Satellite A100-529 has no WiFi and LAN Wireless / WiFi is not extensible. I assume that there is no WLAN antenna inside. You can use the small key USB WiFi.

• Satellite A100-188: it is possible to install Windows Vista?

  I buy the Satellite A100-188 and use the laptop with Vista. is the laptop Vista Ready (all pilot them aviable?)

  Hello

  As you know the Microsoft Windows Vista is not official on the market and Toshiba doesn't provide laptops equipped with this OS.
  The fact is that, currently, no Toshiba drivers are available for Windows Vita.
  If you install Vista on the unit you will not be able to use the special features of Toshiba as FN, for example energy saving keys.

  As far as I know generally the Vista operating system needs to more then 256 MB of RAM and about 7 GB on the HARD disk

• Satellite A100-033: is it possible to update the graphics card

  Is it possible to update the graphics card on the A100-033?
  I don't know if the side PCI slot will accept a separate graphics card?

  Hi George

  It of certainly not possible to update the graphics card. The technology of the laptop is a little different and you should not compare it with the current desktop PC.
  The GPU is fixed and not removable.

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Satellite A100-773: CD/DVD player does not recognize the CD

  Hello friends,

  I have satellite A100-773.
  When I turned on it today it does not recognize any CD. He acknowledges, however, DVD and can also burn CDs with Nero.

  As soon as I put in a CD it says (in German) something like "access denied, unauthorized function.
  It's a mystery to me what happened. Until yesterday, it was perfect. Now the same CD (and I tried 20) wouldn' work anymore.

  I tried the recovery system to an earlier point in time, but it does not help. In the hardware Manager tells me that everything is going well.

  Do you have any idea what it can be?

  Thank you very much

  Ognian

  Hello

  In such cases, it s is not easy to say why it happens.
  Usually if the drive cannot read media either material works badly or the CD / DVD is not compatible and taken in charge.

  But we hope that the equipment is not damaged.
  Try to remove the drive from Device Manager and restart the laptop.
  After that restart of the operating system should recognize the drive again and load the driver. Then you could try to test the drive again.

  I also found a very large Microsoft document on:
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129

  and this:
  http://support.Microsoft.com/kb/315350/

  The other possibility is to use the recovery CD to reinstall the OS.

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• Satellite A100-784 (PSAANE) - CPU is 100% most of the time

  Hello

  I have this Toshiba Satellite A100-784 and it has Vista Home Basic as the operating system. The CPU is at 100% most of the time, and I don't know what to do more (I've eliminated all unnecessary programs that might have a background process). Sill, form 100% of the CPU, the core load takes 40 to 60% most of the time.
  I thought to install XP to make it work, but after reading the forum is not that simple, due to the fact that the HARD drive can be SATA.

  Can you help me with this situation? I can hardly work on this laptop and I think to change the brand if I don't find a solution to this, even Toshiba is my favorite.
  Thanks for your time answering this problem.

  Kind regards!

  All you have done is just, but you must understand that no one knows here Setup OS and what you've done in the past.
  If you are not satisfied with the way in which your laptop is now running the best thing you can do is to back up all your important data and install Vista using delivered Toshiba Recovery CD/DVDs.

  After doing this you will own preinstalled OS and everything should be OK again.