Satellite A100-233 - error that unrecognized USB device

I have a problem with my USB ports, they where working fine but all of a sudden they start gives me error that unrecognized usb device. I tried to reinstall XP but still the same.

Can someone give my solution to this problem?.

Hello

You have yellow exclamation marks in Device Manager?
I had a similar problem with the USB ports a few years ago. I removed the ports in Device Manager and reboot the laptop. The USB ports will recognize again.
Furthermore, I reinstalled the latest chipset driver and everything worked well.

The latest chipset driver download on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

Good luck! :)

Tags: Toshiba

Similar Questions

  • Satellite A100-991 - cannot boot from USB device

    My Satellite A100-991 (MS Windows XP MCE, SP3) does not start from a USB key or USB hard drive. The same USB devices are bootable if they are connected to a desktop computer or a laptop from other manufacturers. I put the USB as the first boot device and use an image "Bart PE" on my USB device.

    In fact, I have installed 2.10 Phoenix Bios version and I wonder if I could update the BIOS by using the 'sa105v21.exe' program and that this would resolve the startup problem.

    Hello

    Have you tested different USB keys? I think that your current USB key is not compatible
    Also test the USB to different USB ports. A port may be defective for the computer to start t with him.

    Theoretically, you can try upgrading the BIOS but don t forget s a bit more risky and it should be the last step.
    Prior to this, load default settings in the BIOS and check if you can boot from USB.

  • HP f335 on computer error message "unrecognized usb device".

    Having problems installing HP deskjet f335 all-in-one. The printer has worked fine for years until that one day I received an error message from windows 8.1 indicating this usb device is not recognized. I installed Hp and MS software troubleshooting and computer ultimately gives same error. I reinstalled the printer software. I bought a new USB shorter. I worked through several stages of various troubleshooting offered on the Hp support site. The printer features all work correctly when used with buttons on the printer itself. It will not communicate with any computer. I tried to install on vista desktop as well as windows 8.0 and 8.1 on two other laptops with the same conclusion. Is there a solution? I'd appreciate any help. Thank you

    Thank you for responding!

    Try this following troubleshooting guide:

    Windows: "Device Setup has not finished" or the "Unknown device" Message appears on the computer when the USB Installation

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    Happy Monday

  • "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

    "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

    1. my laptop - acer aspire 5030 - has been having this problem for the last five months.

    2. I tried everything including changing service pack, as we have xp professional, he has recently upgraded to vista business 32-bit with service pack 1.

    3 tried all the methods start the laptop after a few hours, remove the battery, press the power button for half a minute, and so on.

    4. I finally he formatted a couple of times, but the problem is not.

    5. later, I improved the professional system of vista and installed the latest security patches, but the problem remains

    6. now, I started to update its drivers, although the device is identified to be connected, but is not recognized. "the error message" not recognized usb device "appears. I try to reinstall the drivers or upgrade of drivers, it does not. It displays the message "the drivers for this device are to this day.

    7. initially, the connection of the device, the drivers are installed but still the device does not show in Explorer.

    8. I tried to change some registry values by merging a regedit file in the registry - for display devices that are not present; but still, it has failed.

    9. I then tried to delete the file infcache1.inf in c:\windows\system32\inf, but the problem persists.

    10. Subsequently, I tried to create another registry entry to "disable selective suspend" in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB by adding DWORD and assigning a binary value of 1.

    11. I tried later also to uninstall all the system devices including USB controllers, drives and the storage controllers, who must still without success.

    12. I tried to see if the drivers in safe mode, which they did not.

    13. I tried to delete the following registry entries =

    HKEY_LOCAL_MACHINES\System\CurrentControlSet\Enum | USB PORT; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10318 & HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10200.  The computer does not have alow it.

    14. the BIOS indicates device pnp "disabled", which I also look for the BIOS settings, which do not allow me to change to change existing ones.

    15. I have not found the WINDOWS\SYSTEM32\drivers\USBSTOR file. SYS in my driver store. This affects the system?

    16. I also contacted manufacturers pnp devices that provided me with most recent and versions compatible drivers for my devices - namely an apple ipod & Seagate external HARD drive - but even after that the drivers are installed properly and the system rebooted the problem remains. Is this something to do with the updated playing driver registry entries does not after the update? OR is what registry entries are configured to only read the entries at the time of the installation of the OS?

    17. I also contacted local sellers who have suggested to me to change the "motherboard". This will help as a last resort?

    18. in the meantime I had also installed other operating systems to Linux - Fedora and Ubuntu; Full Windows XP - Home & Professional and Vista Edition. All these have been installed successfully but do not solve the problem of usb.

    19. I have also raised the original HARD disk & replaced by another HARD disk. also checked the power of all ihee and ehee usb ports to be at least 5 V. I also disabled the automatic deactivation of devices usb by the system. physical contact, ports and connecting cable is fine. the distribution of power is set at 10% for the ihee ports and 20% for ports ehee, which is what is should be the physical output is also close to 5V for all ports connected.

    20. all professional (hardware or software) should any solution for the problem of the usb ports on my laptop?

    Something that you haven't tried:

    How to fix USB device not recognized in Windows

    http://www.online-tech-tips.com/computer-tips/USB-device-not-recognized/

    I hope I could help

  • Is Satellite A100-233 does support Bluetooth?

    Hello
    I have the Satellite A100-233. Can I establish internal bluetooth adapter in this model?

    Thank you

    Hello

    All laptops with adapter BT have a BT tag at the bottom of the unit.
    If your device has no label of BT, so the BT adapter has not been installed.

    As recommended in the previous announcement, you can use an external solution as a USB BT's key. It is very easy to use.

  • Satellite A100-233 against Satellite M100-164

    Hello! I am considering buying a Satellite A100-233 or M100-164. I was looking on the specifications for each, and I found that they are very similar (almost identical except for the size of the screen). However, I see that the M100-164 Toshiba Enhanced SpeedStep (referred to under "special functions"), but nothing on Toshiba Enhanced SpeedStep is mentioned for the A100-233. Does this mean that the A100-233 does not Toshiba Enhanced SpeedStep? If so, it means that the laptop A100-233 runs always full speed / full capabilites and never in a 'power saving' mode when idle? It has nothing similar to SpeedStep in there?

    Except for this detail, is there a reason why the M100-164 is better than the A100-233? I'm tempted to go for the A100-233, because it has a bigger screen, but if anyone could report a valid reason why the M100-164 is better, then I might change my mind.

    I'd appreciate really any info on the subject. Thank you!

    Hello

    It depends on the CPU if the device supports a SpeedStep® technology.
    A100-233 supports Intel Core Duo (Yonah) T2300 1.66GHz
    M100-164 supports Intel Core Duo (Yonah) or Intel-Pentium-M (Yonah) T2300 1.66GHz

    I think that the Intel-Pentium-M supports SpeedStep® technology.
    In addition, Toshiba's energy saver has been preinstalled on two laptops.
    This utility controls the use of the processor, cooling module and other features

  • Need driver network for Satellite A100-233

    I just did a reinstall of Windows XP Home on a Satellite A100-233 bought in the Middle East. I have downloaded Intel chipset, then looked up some network driver, the only one that I found that I downloaded (zip file) when I opened there was no facility or the executable file.

    Can you please post the URL for the network driver and all the other necessary drivers for a new installation?

    Thank you

    PS: by the way search gave 0 results whenever I used it.

    You n t need any exe file to install the LAN driver.

    The LAN driver can be installed via the Device Manager. Here, you just mark the unknown device located in the network controllers and point the installer to the place where the LAN driver files have been decompressed.

    All that s.

  • Cannot use mobile mouse 3500 "unrecognized usb device".

    Original title: mobile mouse 3500

    Mobile mouse 3500 has malfunctioned. "unrecognized usb device". This has happened once before. It seemed to correct itself when my computer is doing a weekly update. I did an update manually, but the error has not corrected itself. This mouse is only a few months old.

    Hello

    What operating system do you use?

    Step 1: Try to run the fix it tool to the article below and check.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Step 2: Update the driver for this device using the audit and the Device Manager.
    Reference: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

    Step 3: Uninstall and reinstall the driver and the software for this device.
    Reference:
    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
    http://www.Microsoft.com/hardware/en-us/downloads

    I hope this helps.

  • Unrecognized USB device... need help with the SFC results!

    I followed several channels of the problems that were associated with the popup error in Vista that says "Unrecognized USB device"... that I'm having the same problem.

    I tried to uninstall and reinstall my USB drivers with nothing working.  It was recommended that SFC.exe in the message area of C:.  I did and it came up with error messages that could not be repaired in the CFS program.  What should I do to fix these problems?  I posted the report itself below, showing that areas that have problems.

    Any help would be appreciated!

    ] Beginning Verify and Repair transaction
    2010-02-15 16:28:48, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 16:28:50, info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 16:28:50, info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

    2010-02-15 16:28:50, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

    2010-02-15 16:28:51, CSI Info 0000012 c [SR] verification complete

    ] Beginning Verify and Repair transaction

    2010-02-15 16:32:13, Info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 16:32:13, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 16:32:13, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

    2010-02-15 16:32:13, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

    2010-02-15 16:32:13, 000001 has 1 CSI Info [SR] full repair

    2010-02-15 16:32:13, 000001 has 2 CSI Info [SR] validation transaction

    2010-02-15 16:32:13, 000001 6 CSI Info [SR] a check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

    2010-02-15 18:31:23, info CSI 00000006 [SR] components check 100 (0 x 00000064)

    ] Beginning Verify and Repair transaction

    2010-02-15 18:35:11, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 18:35:12, Info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 18:35:12, Info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

    2010-02-15 18:35:12, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

    2010-02-15 18:35:13, CSI Info 0000012 c [SR] verification complete

    ] Beginning Verify and Repair transaction

    2010-02-15 18:37:58, info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 18:37:58, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2010-02-15 18:37:58, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

    2010-02-15 18:37:58, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
    2010-02-15 18:37:58, 000001 has 1 CSI Info [SR] full repair

    Hi CapsFanQ,

    To repair the system corrupted files on the computer that was not fixed by SFC scan, an upgrade in place might have to accomplish.

    Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

    http://support.Microsoft.com/default.aspx/KB/968279

    (See option 1 in the link)

    Note:  Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. Make sure that you back up personal data to disks or other storage devices before performing an upgrade on the spot. To perform an upgrade in-place, follow these steps.

    Until you try to upgrade on the spot, I suggest you follow the steps mentioned below to fix USB:

    Step 1: Run the fixit provided in the link below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    If the problem persists,

    Step 2: Connect the device to a different USB port and test and also to connect the device to another computer to eliminate the problem of USB device.

     

    If the problem persists,

    Step 3: Reinstall the USB controllers.

    First of all, please disconnect all USB devices and then perform the following steps:

    1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

    2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

    3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

     

    Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

    You can contact the manufacturer of the USB device for known problems

    Step 4: Update the driver of the motherboard (Chip set drivers) to the latest version.

    Note: Please check with the manufacturer of the motherboard before installing the driver.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • IPod Classic (80 GB) "unrecognized USB device" running windows 7

    I've recently upgraded to a new laptop (acer aspire 5738G) running windows 7. I managed to transfer my itunes through library and that you have installed itunes (x 64) that works well. When I plug my ipod classic (80 GB) on a usb port, I get a message saying "unrecognized usb device". I managed to make it work once, but when I did, I got an error understood saying "this drive could run faster" or something in that sense. I tried other usb devices and all seem to work well, so I guess that's the ipod drivers or a compatibility issue with 7 and itunes. I uninstalled and reinstalled itunes, have reinstalled the usb drivers and have browsed the net for a fix but wo's me again! I waited patiently a hotfix from microsoft or apple, but still nothing. It seems that there is a great problem of the spread. Does anyone have any ideas as what was once a small annoying problem turns into a right royal pain in the a$ $. Thanks in advance!

    I also have the same problem is "USB not recognized" and I have the old IPOD classic (20 GB).

    The problem started when I upgraded my home pc to Windows 7 Pro 32-bit of Windows Vista. My iphone 3gs is currently recognized properly but not the ipod 20 GB on the same iTunes 9.0.2. Device Manager reports the 20 GB ipod as "unknown device".

    My computer is a HP Pavilion Slimline s3620f. Almost tried everything:
    -reboot several times
    -Reinstall itunes several times
    -restart the service itunes several times
    -Reconnect the ipod several times
    -tried the front and back of the usb ports
    -deleted the Sentinel file under c:/users //musci/itunes/I've found solution on another forum

    ... still nada, zit, ala!

    Update: I've found a workaround. Fortunately, my ipod classic cable is a cable in there provided with firewire in addition to the usb cable. Since my home pc has firewire port, Windows 7 now recognizes the classic ipod through this port, have a drive letter and itunes works on it as well.

  • Satellite A100-233 - how to use the multimedia buttons in Linux

    Hello!

    I used to use media keys and ALTLinux on Toshiba Satellite A100-233 (who, under the power button)... Its possible? If so, how?

    PS: Sorry for my bad English... If you can answer on Russian... =)

    Hello

    Hmm these buttons belongs to a characteristic of Toshiba and this function needs special drivers of Toshiba.
    Unfortunately, there is no drivers for Linux distributions and that's why I put t think you will get these buttons work after installing Linux.

    See you soon

  • Satellite A100-233: can I use the WiFi for the Peer to Peer network?

    Hello
    Me & my friend have Satellite A100-233, we cannot have network even see ourselves at the TOP unless we are in place contain the wireless Internet Modem.
    If we cannot make network peer-to-peer between us using WiFi?

    I hope you can help!
    Thank you

    Hello

    I don't know if I understand your question, but you want to connect two laptops via the WLan. Am I wrong?
    Well, this type of network connection is called Ad hoc.

    Choose Start-> settings-> network connections, and then click the local network connection you want to share. On the left side of the screen under the management of the network, click on "change settings of this connection. Under the Advanced tab, under Internet connection sharing, check the box "allow other users of the network to connect through this computer's Internet connection".
    There is also a check box to allow other users to enable or disable the Internet connection, if you are so inclined. If your network doesn? t need to access to the Internet, you can skip this paragraph.

    The host system must also be configured with an Ad Hoc network connection and a Set Service identify (SSID). Right-click on the wireless icon in the system tray and choose "view wireless networks". Do NOT yet connect to any wireless network that could appear in the box. Click the Advanced button. This will bring up the Properties window of wireless with the wireless networks tab at the front. Click the Advanced Options button at the bottom right of this tab, select the option "networks from computer to computer (ad hoc) only". Make sure that the box "Auto connects to the non preferred networks" is NOT checked. Click the close (once) button to return to the wireless network tab.
    Under preferred network, click Add. You now need a SSID for this machine, which is actually the name it will use to announce themselves to the other members of the ad hoc wireless network.

  • Satellite A100-233 - what memory I need?

    Hello

    I have the Satellite A100-233 and I want to increase its memory. The question is, if my card MOM, can I put DDR2 memory with 667 MHZ speed or I use only 533 MHZ?

    Thank you

    Hello

    It according to your chipset you ;)

    If you want to just buy a second memory module, I'd be the same module as the first. So that you know its module is compatible with the laptop and normally two identical modules must be used in the book to avoid problems of incompatibility.

    But as far as I know A100-233 can handle up to 667 MHz modules. If the first module runs with 533 MHz, the second module will work also on 533 MHz. This means that the modules are compatible downgrade.

  • Satellite A100-233: AC adapter malfunctions - need a new

    I have a technical problem with my laptop model satellite A100-233, which is still under mandate.
    My adapter PA-1750-08 model with output 15V 5 malfunctioned. I did not damage the laptop only food.
    I bought a model of Toshiba AC adapter universal PA 1900-22 output 15V 6 amps at a local Toshiba reseller. If I use this adapter burn I have my laptop?

    Thanks for your help.

    Kind regards

    If you purchased it by Reseller Toshiba, that I'm sure that you have the right one and you don't have to be worried about the features.

  • On battery power my Satellite A100-233 runs only 1 hour

    Hello

    I would like to know if it is normal that the battery lasts 1 hour. Everything I do is either go on the internet or use word doc or power point presentation. I can't watch a dvd without the use of power due to the battery. I would also like to know what battery normally comes with the Satellite A100-233.

    Hello

    It's not easy to say how long the laptop will only work with the battery power.
    Battery working time depends on the use of the laptop!
    In your case I guess the laptop should run about 1h30min 1h15min

    You Satellite A100-233 belongs to the series of PSAA8E. Am I wrong?
    Well, this series was delivered with a 4000mAh battery. As far as I know the price part number indicated PA3399U-2BRS PA3399U-2BAS

    Anyway the 4000mAh batteries are standard and are not very powerful.
    If you want to run the notebook much more on battery I advise to use the batteries as:

    Battery pack high capacity PA3400U-1BRS (Li-ion, 12 cells, 8600mAh)
    PA3478U-1BRS extended capacity battery (Li-ion, 6000mAh, 9-cell)

Maybe you are looking for