Satellite A100-447 - DVD player does not read some discs
Hello
I have a 4 month old Satellite 100-447 (PSAAN), came preloaded with Vista Home Premium and a carpet * CD/DVD super-multi UJ-850 s player.
The DVD player does not work properly. It will recognize a few blank, but never DVD-R DVD and won't recognise any DVD at all serious. He is very good with CD and DVD movie discs. It's just recordable DVD where there is a problem.
Also when you try to write to a DVD, when he chooses to recognize a TI-error in half way through.
What can I do?
Thanks for your help.
Adam
Hello
You can do the follwowing:
Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp,
Download the latest update of the firmware for this drive, install it, and then try again.
Sometimes, the manufacturer must update their readers for the newer recordable media and so I think that it is possible that your drive is simply not up to date.
Welcome them
Tags: Toshiba
Similar Questions
-
Satellite A30-404: DVD player does not read some DVD
Hello
I have a satellite A30-404, and recently, I installed a new firmware update for my TOSHIBA DVD - ROM SD-R6112. (page can be found [here | http://nl.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=NL&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 518 & langua ge = 33 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 28 & selectedLanguage = 33 & type = all & page = 1 & ID = 46804 & DISO =-1 & driverLanguage = 42])
Since then, I can't play some DVD I write, for the most part, the 4 GB DVD +, for example, I can perfectly read a 1, 3 GB DVD with 3 multisessions.
However, other computers can read the DVD I can't.
Help would be appreciated.
Maybe the new firmware does contain all of the information on the DVD.
Do you know what firmware is or what information it contains?The firmware of the drive contains simple information about the support that can be used, what burning/reading speed is supported, which average manufacturer is compatible, etc.
Maybe the new firmware contains other information such as and therefore CD/DVD cannot be played correctly.
I think in this case, you need to test different CDs/DVDs and try to burn at a different rate.PS:
http://support.toshiba-tro.de/KB0/TSB56012R0004R01.htm -
Satellite P855: CD/DVD drive does not read 3 "Disc Camcorder
I have a new Toshiba Satellite P855 model but can not get the CD drive integrated read/recognize 3 "discs of my Sony's Handycam camcorder.
My previous laptop Aspire straight bed (as did older laptops) and currently have to use the Acer to import video footage on a hard drive.
If I connect directly the Sony camcorder to laptop Toshiba (via USB) it won't always recognize the drive if I put it back in there.
The Toshiba uses the W8 while software on Acer and other models previous I was using Windows7, but I do not see how it would make a difference.
Can someone tell me if it is possible to get my Toshiba to read the discs of my camcorder?
My apologies if this topic has been previously covered - this is my 1st post on this Forum in question and I did a search on the topic before making this post, but nothing came.
Concerning
Terry* PS.*, When I put a disc 3 "in the drive, he keeps trying to read (in the sound I hear) but quit eventually.
* PS2: * can I have solved the problem - sometimes you just can't see the forest for the trees.
It appears on the Toshiba (under Windows 8), the disc must be finalized before we can read - while on the other laptops (under Windows7), is not.> Can I have solved the problem
> It appears on the Toshiba (under Windows 8), the disc must be finalized before it can be readThanks for the short comments!
-
Tecra M5: DVD player does not read these mini DVD
I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.
Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.
All the other standard size DVD, CD works good about it. Its complex and as well as irritating.
Any suggestions?
Why his messedup?Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
Try the sascha. Maybe you are a lucky man, and it works.
If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
Then stops again, put the drive in the notebook and the startup of the device.
The laptop should recognize the drive and must indicate the firmware again.I don't know if this will help but it s attemptable m
-
DVD player does not read DVDs but reads CDs only.
my hp compaq 420 core2 duo dvd player does not read DVDs but only reads the CD. How can I fix this, please help me with the correct answer.
It will probably replace the drive. There is more than one laser in there: one for each function. You can go bad without the other goes wrong.
608141 001
Above is the part number for the DVD burner. I couldn't find one on eBay. In here is a online:
Replacement is easy. Remove one screw on the bottom and drag the old hunt and replace it with the new drive.
-
Satellite P25-S520 - DVD player does not work properly
Difficulty of DVD player or buy the external drive
My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).
I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.
An attempt to update the driver has also fails.
I was able to copy a CD of music last night so that at least works properly.
Does anyone know how can I fix? The important part is to be able to load my new program.
Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?
Thanks for any help,
Humbaba3000BCSatellite P25-S520
PIONEER DVD - RW DVR-K12D
Driver provider: Microsoft
Driver date: 01/07/2001
Driver version: 5.1.2535.0
Digital signer: Microsoft Windows PublisherAny external USB CD/DVD drive will be compatible with your laptop.
However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.
So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.
-
DVD player does not recognize some media on Satellite A30-514
I own a laptop Satellite A30-514 with Microsoft xp OS. For some time, some DVD (no games) will not play of the drive. some other not. It is not a problem of region - they are all region 2. Windows does not read the disc when inserted and does not record a disc in the drive when I show 'my computer '. CD is the game normally. This could be a (internal) driver problem or my CD DVD combo is all just too old now?
Thank you, Mary.
Hello
To give you a precise answer, it will be interesting to know what DVD is not readable. Meaning of the word "media" is in general and not helpful to understand the problem.
Satellite A30 is old enough laptop model, and it is possible that the WEIRD feature is not good more. You can try to clean the lens.
-
MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE
MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.
I DON'T KNOW WHAT IT IS.
I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.
IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.
HELP PLZ
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check the cables
both ends. Remove and replace, do not just tight. For laptops, you can often clean power
and contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer
and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Equium A100-338: CD/DVD player does not read CDs and DVDs
Hello
ITS BEEN 2 DAYS SINCE MY CD/DVD DRIVE WILL NOT READ ANYTHING MORE?
I UNINSTALLED THE DRIVER AND RESTARTED THE LAPTOP, SO HE HAS REINSTALLED THE DRIVER AGAIN, BUT IT STILL DOES NOT WORK.
IVE ALSO TRIED TO GENTLY CLEAN THE LENS BUT THAT DOESN'T WORK EITHER.WHEN I PUT A CD OR DVD IN THE DRIVE IT SEEMS TO READ, RE-READ AND RE-READ UNTIL HE GIVES UP AND A LIGHT ORANGE REMAINS LIT ON THE CD/DVD DRIVE ITSELF?
PLEASE CAN SOMEONE HELP!
Hello
Please put a recovery media delivered on ODD, start your laptop and press the F12 key. Choose the CD/DVD as first boot device and check if the recovery procedure starts correctly.
Please publish results.
-
DVD player does not read DVD discs, or does it only intermittently.
Toshiba Satellite A135 laptop.
w/Vista Home Premium;
has a drive TSSTcorp CD/DVGW TS-L63D DVD/CD-RW.
Hello
You really need this post in the Forum of Driver and Vista Hardware. A moderator will move
There are.Answers - Vista - Hardware - Forums
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads================================================
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.A CD/DVD cleaner might help.
------------
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
2005 media center edition dvd player does not read Dvd
My support 2005 Centre of dvd player will not play any Dvd code error indicates "can not read the dvd.
Probably, it is because you do not have a compatible MPEG2 decoder installed.
Could install you the Decoder Checkup Utility from MS, launch it and display the results?Kind regards
Chris MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
My dvd player does not read CD
Whenever I put in a CD, nothing appears and sometimes it say application not found.
Whenever I put in a CD, nothing appears and sometimes it say application not found.
See if these applications Microsoft Suppot difficulty it will help.
Crive of your CD or DVD cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-usThe CD drive or the DVD drive does not work as expected
http://support.Microsoft.com/kb/929461 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS
The CD/DVD drive does not appear in the window manager and I can't incert CD
The BIOS displays "none" instead of "optical device".This means that the CD device is dead?
Hey Micky,
Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.
Check also that it is not displayed in Device Manager and if it is remove before trying the above.
Kind regards
-
DVD player will not read the discs more after burn fail
Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?
DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.
-
Satellite A50: DVD player does not read DVD only CD
On my Satellite A50 DVD drive can only read CDs now but not DVD. So I'm not able to use the recovery disc.
My BIOS is up to date, I think.Hello
Well, what can I say? For me, this looks like a disk failure.
Maybe the lens can not calibrate properly and that's why the drive is able to read the CD.
I don't think that the replacement of disc will help you :(
Maybe you are looking for
-
My computer starts rather suddenly gel with many applications. Today it froze again once I finished a long email and was about to send. I lost him of course. My Event Viewer was the topic. Event 7000, Service Control manager Eventlog. What can I
-
error code 1722 when trying to install wireless aircard Sanchez
-
SPA 112 - make calls over WIFI between the lines?
Dear community You just bought a SPA 112 which seems to work very well, except for one thing: We do not seem to place calls between them the two lines (long cable between two buildings). It sounds but is silent and hang up after making a call and end
-
My computer crashes when I try to run some games and crash report says that it's probably caused by rwdrv.sys. I looked and I couldn't find anything. I found it in my computer under windows/syswow64/drivers/rwdrv.sys. What should I do? What does rwdr
-
How can I get rid of duplicates from folder?
I have a HP Win 7 system that I bought in November 2009. I moved all the backed up files, I created a Vista system and saved on an external hard drive and put them in the appropriate in Win 7 folders. Along the way, about a month or two ago, the 'My