Satellite A100-498 hangs after suspension or hibernation

Hello everyone

I just bought a new satellite A100-498 and just realized that whenever I leave the computer for a while and he needs to go in hibernation or suspenson, he's going, but when I get back and try to restart, it begins to restart, but it crashes right after with a black screen (in hibernation) or on the desktop (suspension). I tried to change the settings for tye on the Toshiba powersaver, but it still happens...

can anyone help?
Thanks in advance

Hi Helen,
Try to install the new drivers VGA and chipset.
I think it will solve the problem.

Tags: Toshiba

Similar Questions

  • Bluetooth module internal for Satellite A100-498

    Hello
    I recently acquired a Satellite A100-498, in this model, there is no internal bluetooth interface.
    Can someone tell me if it supports an internal bt module?
    I found a page saiing it supports PA3477U-1BTM, but he wasn't an official thosiba of the page.

    If anyone knows please let me know.

    concerning

    Miguel

    Post edited by: mig.alm

    Hello

    I found the news that BT upgrade is not possible on your model of laptop and if you want to use best BT and the best solution is key USB BT.

    Is PA3477U - 1BTM BT USB or the MINI PCI wireless network card?

  • Satellite A100 psaa9e beeps after BIOS update

    Hi all!

    My pc is a Satellite A100 psaa9e and after that the Bios updated Bios say 'no tmp or tmp has failed. "

    I have try this procedure (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36186&tstart=0) and my pc does not restart automatically.
    He finishes the beep continuous beep, a low beep and two normal beep, and * didn't do anything that I have not reset! *.

    _FLOPPY LEADER: _
    the diskette is 1.44 m
    MINIDOS on the diskette. SYS PHLASH16. EXE BIOS. PHLASH WPH. INI
    the BIOS. WPH is version BIOS of San Antonio s10gm590.rom (5.90) http://support1.toshiba-tro.de/tedd-files2/0/bios-20070709111839.zip
    the PHLASH. INI file contains the following:
    [UI]
    Advanced = 1

    [Hand]
    RetryCount = 3
    UpdateMode = 3
    FormatVersion = 2
    UpdateFlags = 802880
    UserFlags = 802080
    UserMask = d121a4
    PSIFlags = 8000080
    UserMode = ffffffff
    BackupFile =
    ImageFile =

    Please help me!

    In my opinion, the ROM module where the BIOS is stored has been damaged or has been flashed properly.
    In your case, I recommend you contact the ASP technician and ask guys processional flashing the BIOS.

  • Satellite A100-201 stuck after enabling hibernation mode

    My computer is an A100-201 and its dead end hibernation. I read the advice others have written, but I can't get it back to normal. He was weak in power then start to Hibernate / hibernation. by pressing the key power dosen't work I need help. Please

    Hi girl

    A friend of mine called me yesterday because he noticed the same issue. After awakening, he saw just a blue strip instead of the task bar and the screen was black.

    Only solution was to press the POWER button and hold for a few seconds. On this way, you make your laptop to SWITCH OFF. Laptop and press the power button again will start as usual. After reboot, everything will be OK again.

    Please do the same. If you have more problems to write again.

    Good luck!

  • Satellite A100-TA7 hangs at POST after BIOS update

    Kind of tech swavy, I know that my chances are very low to solve this but this is.

    I decided to update the BIOS on my laptop Toshiba Satellite A100-TA7(PSAA8C-TA702C) to the latest version available (6.00).

    I did it because I've heard of people have better luck doing their job of FN keys on linux with the latest BIOS.
    The installation is completed normally (went through all the steps, wrote to all 21 blocks) without any error, but after the reboot, I noticed that it is now displayed at the Toshiba logo screen.

    The blue progress bar moves twice but got caught then about 1/3 of the way through.
    To see how bad the damage was, I Press esc at the beginning of the POST and saw that it gives me the right Version of the BIOS (6.00).

    He also told me that "no TPM or TPM has problem" and "2039 M RAM Passed system."
    It then displays the message "Press to enter SETUP" (which makes the message disappears, but otherwise doesn't do anything.

    If I press f2 during the Toshiba logo screen, it replaces the message at the bottom with "Please wait" and nothing happens even after an hour of waiting.
    (Which makes sense, because before the bar blue everything would load before entering the CMOS settings). The thing is that the BIOS is not really "freeze", it gets stuck just at a specific place (I know because I can press F2 even after an hour of waiting and the laptop meets it by displaying "Please Wait".)

    Someone at - it no more things I could try? Thank you

    PS. I tried clearing CMOS too. (Now the power button for 60 seconds without energy source<--- i'm="" not="" sure="" if="" this="" is="" how="" you="" do="" it="" on="" this="" laptop="" so="" any="" info="" would="" be="" nice).="" and="" i'm="" also="" 100%="" sure="" i="" chose="" the="" right="" bios="" update="" and="" followed="" every="" single="">

    Ola Amigo

    It of very long history and it does not sound good

    > I decided to update the BIOS on my laptop Toshiba Satellite A100-TA7 (PSAA8C-TA702C) to the latest version available (6.00).
    I wonder about your BIOS version that I know, that the laptop series is designed for the Canadian market. It s a Canadian series and the BIOS or drivers should be downloaded from the Canadian site of Toshiba!
    Bad BIOS could cause issues like this it describes your message above!

    > I did it because I've heard of people have better luck doing their job of FN keys on Linux with the latest BIOS.
    Keys FN Toshiba need driver Toshiba and it turns out that Toshiba driver pages don t offer the drivers for Linux distributions, so I put t believe in the story spread by any people.

    I don t want to write a long story, so I would cut this now;
    Is that something was happening during the BIOS update process.
    Either you have used a procedure to update the BIOS or wring wrong and so the laptop can not pass the MESSAGE

    You will need to contact the local ASP to solve this problem, maybe you're a lucky guy and the technician should Flash the ROM module but in the worst cases, your motherboard is damage and must be replaced. :(

    Good luck

  • Satellite A100-178 hangs at the STATION after the BIOS update

    Hello

    Recived my Windows Vista upgrade Moduslink yesterday. I followed the book on how to upgrade to Vista, and the first step was to update the BIOS to 5.10. The BIOS code was provided on a CD and I applied it by the book. Now my A100 will not boot. It s hangning to the beautiful red-logo Toshiba to the POST screen. The only button on the keyboard that responds is the ESC key. When you press the switches of the screen to the screen of detailed JOB. Just under the CPU information, he says that he has "no TPM or TPM has problem", there are information memory and "Press F2 to enter setup".
    Nothing happens more...
    Is there a smart way to reset or rollback BIOS? Please?

    Please excuse me if the English is bad...

    / Fredrik

    You are 100% sure that you used the good BIOS?
    Seems that you have used a wrong!

    Please check if your number of Satellite A100-178.
    That I remember that the laptop is a part of the PSAA9E series.

  • Satellite A100-914 - stop after 10 minutes on

    Satellite A100-914 - Vista Home 32-bit edition

    For some time, whenever I turn on the computer it off after 10 minutes. Usually I restarted and then everything was ok, but these days, it seems to stop several times.

    In my screen displays the blue screen saying on: driver_power_state_failure...

    I've updated to Vista, a patch which should solve this problem, but the problem of still images.

    I have also updated the Bios of Toshiba, and then I get a Warner 0251 checksum bad - default configuration used.

    I also have problems with superfetch and search for host when I connect to the internet... but it is perhaps another question...

    Thanks in advance
    Daniel

    Hello

    What to say...

    Regarding the automatically close downs;
    For me, it looks a bit like overheating. Maybe you should check if the temperature is not too high and check if the cooling modules are working properly and it can cool the laptop properly. Sometimes the dust inside the laptop could have a bad influence on cooling.

    Regarding the system BIOS checksum bad - default configuration used:
    Try to access the BIOS and set the default BIOS settings. Then save the changes and restart the laptop.

    Regarding the MS patch:
    I found this Microsoft Knowledgebase document:
    The STOP Error Messages troubleshooting 0x0000009F DRIVER_POWER_STATE_FAILURE in Windows
    http://support.Microsoft.com/kb/246243

    It is said that this problem occurs when drivers do not properly handle power state transition requests.
    The error message most often occurs during one of the following actions:
    -Closing
    -Suspension or out of standby mode
    -Suspension or out of hibernation

    Check solution proposals in the document of Microsoft.
    If this does not help, I guess it's a hardware problem and you will need to contact the ASP in your country.

    Good luck

  • Satellite A100 keeps freezing after a short period

    Hi, I wonder if anyone can help.

    I have a Satellite A100 laptop. The laptop starts without any problem. However, after a short period of time the system crashes and I have to reboot the machine.

    I am running Windows XP Home Edition. I tried to reinstall a new copy of windows XP Edition family. However, the laptop continues to freeze when I try to do something.

    Although the real time, it takes before it freezes changes each time.

    I have two 512 MB RAM chips, and I thought it was a fault memory. So I took each chip out, leaving the other chip in. It makes no difference, the machine hangs with either chip.

    Help, please. I would like to hear from anyone who might suggest what's not here.

    Thanks in advance

    Maybe the temperature inside the laptop could be the reason of this gel.
    I had once similar there is question. My frizzy 6 specifications because the temperature affected the memory modules.
    So I cleaned the cooling fans using a jet of compressed air and I replaced the thermal grease which is a space between the cooling module and CPU. This helped...

    You can try to clean the cooling also fans. But be careful and if you have no experience, then a mobile technician should help you.

    Good luck

  • Satellite M50 226 hangs after the victory of logon Wlan is turned on

    Hello everyone,

    I had a problem with my satellite m50-226.
    It happens quite often that when I boot up my laptop a card WiFi is turned on, the computer hangs after windows journal.
    When I type my user password nothing happens and a few seconds later, the background appears but nothing else.
    When I restart the laptop the same problem occurs. only when I turn off the wlan card, I can start the computer successfully.

    Maybe anyone can help me?

    thanx.

    welcome them
    Alex

    Hello Alex

    I am very interested about your problem and it is interested to know if this problem persists if the unit wakes from sleep or hibernation mode.
    Can you please verify this?

  • My Satellite A100 would not be put into hibernation

    Hello

    My laptop would not be in hibernation when I activate in the windows toolbar.
    When I activate the hibernation it will normally, but when the monitor takes blue and says "prepare put into hibernation" the monitor or system do not shoutdown (turn off), why?

    Is that the same for the suspend mode.

    I did a survey on my laptop and see I mode hibernation is enabled in control panel > power Setings > Hibernation

    My laptop is a Satellite A100.

    Sorry for my English.

    Thanks a lott!

    Hey Buddy,

    Sometimes, these problems of hibernation / suspension are caused by some programs that can't be closed from vista. Or your toshiba powersaver works bad, maybe some settings have been
    badly configured through that-I-know-what program or something else.

    I suggest you first: when you try to hibernate/suspend, then try pressing CTRL-ALT-DEL to see what applications are STILL running. Try closing the applications in the order of
    see when the machine will be really placed in hibernation. If this doesn´t has helped you, then try reinstalling the powersave (first uninstall correctly your system) and give a few
    What feedback happening.

    Greetz

  • Satellite A100 - display balack after replacing the LCD screen

    Hello

    So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

    When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

    I think it is the inverter, any suggestions?

    Could be the sensor cover?

    Thank you! Kyle

    Hi Kyle,.

    Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

    Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
    Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

  • Satellite A210-SP6812 hangs after hibernation with a Wi - Fi connected

    I have a Satellite A210-SP6812 running with win XP SP3, and when I turn into suspend mode and later he attends the hibernation (I have the choice in Toshiba energy saving) it will, but after that you will wake up never the system again unless you reset the laptop.

    It is important to note that this only happens when the WiFi is enabled (Realtek RTL 8187 (B). I'm updating this driver but nothing works. Once it happened when the laptop was inside my bag and despite the hibernate after the suspension, he hooked up with all coolers & heat inside was amazing.
    An idea of the cause of it?

    Thanks for your support!

    Leo

    Have you updated the BIOS? Perhaps the problem will be solved.

    If it isn't, then it might be another problem in Windows. Maybe a 3rd driver is causing a conflict. Recovery time should solve the problem.

  • My Satellite L300-110 hangs after BIOS update

    My Satellite falls down after I updated the BIOS. The old version of my Satellite L300 - 110 (PSLB0E) BIOS was 1.40 and upgrade to 1.50.
    From there on, my system hangs over and over again.

    Any help please. I cannot install Office Enterprise 2007, cannot defragment all my readers.
    Is there an option to restore changes made to my BIOS?
    Help!

    The default settings in the BIOS load after the update?

    You can reinstall Windows with the Toshiba Recovery disk? First back up your data because the HARD drive will be formatted and then start the installation of recovery.

    A restoration to the previous version of the BIOS is not possible, because on the Toshiba site is only the most recent (1.50) BIOS. Only an ASP (authorized service provider) can do a restore.
    You can search for an ASP here:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

    I don't know Mr. but you did a backup of the old BIOS? Maybe you can Flash this back.

  • Satellite A100-549: BSOD after I used the recovery from another PC

    Hello.

    Had a few probs with my laptop and decided to recover it using another pc recovery disc.
    I get the laptop is a Toshiba a100-549. Unfortunately for some reason I can't disks that were originally with her.

    The opertaing system is Windows xp. The disks I got with a Vista.
    It loads OK but goes to a blue screen after 30 seconds and restarts. Is there a reason for this and can I do.

    I think I may need to get your hands on a good drive and load it on again.
    Someone at - it copies of drives for this laptop and able to send me their. I'll gladly pay for them...

    Colin

    Hello

    Don t user recovery drive to another PC, because it won't work.
    You can use a clean Windows OS disk or the Toshiba recovery disc.

    Why? Because the recovery disk contains an image. The image is a package containing a Windows OS, drivers and other software.
    If you want to use the recovery from another PC disk then all the drivers, tools and software distributed for this PC will be loaded on your Toshiba laptop.
    This can cause the BSOD!

    So if you n t have the Toshiba recovery disc then you should use MS Windows CD!
    Toshiba drivers can be downloaded from the Toshiba page!

  • Satellite L450D - 11G - hangs after the installation of recovery

    The recovery disc provided does not work. After you install all the files, it goes into a boot loop with "installing Windows for the first time, through 'Please wait', for flashing to the top of the home screen and then stop and restart.

    Is there any solution for this?

    Hey Buddy,

    You must wait a few minutes. On my laptop Satellite and Windows 7, I had the same problem. Windows will be reinstalled several times until the installation is complete and you will always see the same screen.

    Don t so worry about this. Everything is ok with your laptop! :)

Maybe you are looking for

  • Incorrect Date and time

  • Family sharing and Apps

    I joined apple music and decided to upgrade so that my family can also listen to music, I did it because the price is reasonable. I'm a little confused and a little annoyed of cannot just leave your family to listen to music, you agree when setting u

  • Crush returning them SubVIs setting

    Hello I would like to run multiple instances of a reentrant VI. The twist is that this VI has many SubVIs and some of these SubVIs are "Functional Global Variable" (-on while loop shift register). Thus, instances share the same memory allocation for

  • VI for registration of remote OPC servers?

    We use the engine tag DSC for save data from different remote OPC servers. DSC requires these OPC servers to be registered before connect you to them. To do this, we open the tag Configuration Editor and choose SERVER > BROWSE NETOWRK OPC SERVERS in

  • LaserJet P2055DN print quality problems

    Hi all New to the forum but plan on using it quite frequently as I am responsible for a large group of HP printers.  The problem I have is with a printer HP Laserjet p2055dn pritner.  I feel some ghosting along the right and left a few impressions I