Satellite A100 - 510 PSAA2E cannot start - nothing on the screen

Similar Questions

• Satellite A100 - Questions about slow start, not in the DMA mode CD drivers

  Hi all

  as you can see I have 3 questions:

  1. my Satellite A100-153 starts very slowly (current running avira antivir and sunbelt pfw only like on my other laptop which is older than this one, but not slow start)-anyone has any idea why (I would be very gratefull because I don't have reinstall win and all my stuff)?

  2 Nero tells me that my CD is not running in DMA mode - where can I check and fix this?

  3. drivers - am I forced the drivers supported on this site or can I use the drivers directly from the manufacturer (ATI for my graphics card, Intel for my chipset realtek for my sound and so on)?

  Help is welcome!

  Hello

  For me, it will be interesting to know what operating system you are using. Anyway, I'll try to give my short opinion on your questions:

  -many other factors may be responsible for slow start. It is usually the OS configuration. I'll try to find an interesting article, how to make faster starting and I will post it here for you.

  --entrer enter in the device IDE ATA/ATAPI controllers Manager, enter the properties for secondary IDE chanel and open the Advanced Settings tab. Is under transfer mode DMA if available? If this isn't the case, set it to please and after reboot check if the problem persists. DMA if available is usually defined as a default value.

  -In general, you can use it but it is well known that manufacturers of graphics card don't support mobile graphics cards and laptop manufacturers are responsible for.

  I recommend you to use the Toshiba drivers only. All of these drivers are put to the test.

  Good bye

• Satellite M50D-A-10Z cannot start, stuck on the Toshiba screen

  Hello

  I tried to install windows 8.1 after computer instalation. After this restart I can not do anything computer stuck on the toshiba screen (8 h), when I tried to turn on and go to the bios by pressing TAB computer stucks on bios Version screen and wont move :(

  Can someone help me! PLS

  To access the BIOS, you must press the F2 key immediately after pressing the power button.
  Is this possible? You can access the BIOS?

  The laptop seems to be sold without a preinstalled OS. How have you installed the Windows 8.1? Have you changed some settings in the BIOS?

• I do not know password BIOS for Satellite A100-528 PSAA2E

  Hello.. I have a problem...

  I have a laptop Toshiba SATELLITE A100-528 PSAA2E-01H00WGE...
  the problem is that I downloaded toshiba HW setup and I accidentally put a password...
  not a password... it's propably supervisor password or bios password...

  .the thing is that I don't know what the boot is... i password my PC and it doesn't let me do windows if I don't type the password... y at - it a way to remove the password?

  It won't let me either start from a cd or usb... I press F12 to choose to boot from the cd or usb, but it's still request the password unknown... is there a solution?

  Please answer it is essential!
  Thank you very much...

  > the problem is that I downloaded toshiba HW setup and I accidentally put a password...
  > .not a password... it's propably supervisor password or bios password...

  That s funny because the BIOS password or contractor may be reset by an authorized service provider.
  The BIOS password is a high security option that can not easily be reset.
  Then ONLY ASP can remove a UNKNOWN password.

• Toshiba site does not recognize the Satellite A100 - 208 PSAA2E?

  Hello I'm from Portugal and a habit to know why the company toshiba not to recognize the Satellite A100-208 (PSAA2E-03V031PT)

  When I go to the support section, my dose of series is not displayed, there is a problem in this series?

  I need to know the good reference out Batery and memory of my equipment

  Hello

  You are right; Satellite A100-208 is not listed in the site Options & accessories
  Why? Who knows maybe the database needs to be updated.

  But not don t worry. As you have already said the Satellite A100-208 is a part of the series PSAA2E. I found the unit A100-204 on the site Options & accessories and it s the same series as A100-208!

  In order to choose the A100-204 of the list and you will get compatible parts and accessories for your A100-208

• Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

  I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
  He tells me to update the video driver or install a new video card.

  I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

  Someone had this problem? How did you solve this problem?

  Thank you.

  First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
  I put t know if you use a graphics driver right but necessary for correctly working Vista.

  The user Scooby1966 has posted a nice Vista tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

  By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app

• Satellite A100: drive is not read most of the dvds

  I have a Satellite A100 with the following specifications: [information on PC]
  Model name Satellite A100
  Part number PSAA9E-xxxxxxx
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.30
  Processor Genuine Intel(r) CPU T2300 at 1.66 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 80,286,958,080 [bytes] 74.773 [GB]
  Capacity of the hard drive space free 27,243,552,768 [bytes] 25.373 [GB]
  Video ATI Mobility Radeon X 1600 version = 8.204.0.0

  IDE Device 1 TOSHIBA MK8032GSX
  Interface IDE 2 no
  Version FW IDE Device 3 HL - DT - ST DVDRAM GMA-4082N = HV02
  Interface IDE 4 no
  Interface IDE 5 no
  Interface IDE 6 no

  [Information QFE]
  Windows Update "KB888111WXPSP2".
  Windows Update 'Q147222 '.

  The problem is that I can't open most of the DVD. Some of them were ok before, but lately when I am tring to open just blocks. The light just flashes and nothing happened...

  Can someone help me, please?

  Hello

  It is a never-ending story.
  Many media doesn t work with my drive. I have tested many media from different manufacturers and now I use a some of the TDK media.

  Generally, you will find in the manual the user who must be preinstalled on your laptop a list with compatible and supported CD and DVD.
  These media should work properly and the reader must read and burn without any problem.

  But of course, sometimes a failed drive can be a reason for no reading or no combustion.

• Satellite P200D died - nothing on the screen, no HARD drive noise

  Hello
  Toshiba P200D-112 (satellite)
  Just 2 years and already 'OUT '.

  When I press the Start button, the power light comes on and will stay on.
  The fans start but stop in a few seconds and nothing more happens.
  Nothing on the screen, no hard noise complete silence.
  If I continue to press the start for a few seconds power button is sharp as usual.

  Looks like a protection stop start to work.

  I changed the CPU for nothing (the only chip that I can change without welding).
  I tried with battery and without the battery.
  I changed the HD.
  I deleted the DVD player.
  Now, I have on the table, just the motherboard and I have always the same thing.

  Do you please an idea on the reason of this phenomenon.
  Thanks Christos

  Hello

  I see you didn't check the RAM modules.
  Usually, it is the first part that should be checked before you disassemble the laptop everything and try to replace the other, new parts like CPU or similar

  But if the replacement of the RAM won't help, so I put t see any other solution proposal to replace the whole motherboard.

  It's a shame because the new motherboard costs a small fortune

• Re: Satellite Pro A200 - no activity - nothing on the screen

  Hello!

  I have a lot of problems with the Toshiba Satellite Pro A200.
  Same problem for all: when you connect the power adapter led turns blue!
  When I press on "on" button the second led turns blue, the fan runs for a while, but there is not activity: nothing on the screen.
  No thing hard disk led...

  I have a lot of this problem with the Satellite A200. The motherboard is a LA - 3481P.
  I am an electronic engineer and I m specialized in laptop repair card main but I did not understand this problem.

  Can U help me telling me that maybe the defective chip?
  Thank you very much

  Hello

  I don't know if you saw that this forum is the forum of users and you should not wonder if nobody can give the exact answer. As an electronic engineer, you must know that no one can answer specifically and to find the good chip, you must run diagnostic tool.

  So I think that you need professional help. Try to contact nearest Toshiba authorized maintainer and ask for help.

  BTW: I am really interested about new comments here.

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• M17x R1 does not start - black screen - fan turns, turns on the keyboard, nothing on the screen.

  Hi all

  Newbie here and desperate.

  I have a problem with M17x my son this morning. Everything worked very well and after some time, turned off the machine it self.  Now it does not start even - at least I think, it won't because there is nothing on the screen as it is empty.

  I've tried several things, including trying to move on and outside, with or without a battery of the power cord.

  I'm at a loss as to what could have happened.

  Help, please.

  Smakwam.

  The gpu of cooking is very easy in fact, that you have designated your oven to about 275 degrees cover a cookie sheet with paper and configure the map out of it by winding 4 balls of aluminum foil and their definition on each corner of the map. you never want to have it put all directly on the sheet. do Cook for about 10 minutes then cool before coming back into the laptop. Always be sure to remove all of the components and the radiator and any residue of thermal paste. After sick cooking you need to reapply a fresh thermal paste. I use artic silver 5. It is has more detailed instructions on this online, as well as photos. You want to make sure it's your video card before you do it just to be sure. I just had to do it again last week, works like a charm for me every time.

• Start Windows vista, nothing on the screen, only the pointer of the mouse

  I have a gateway desktop vista, nothing on the screen, only the pointer of the mouse
  I used the recovery tools nothing fixs

  Hello

  "I used the recovery tools nothing fixs.

  It helps us if you tell us what they were.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If necessary, here's how to reinstall back to new condition.

  "Gateway Recovery Center in Windows Vista® '

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read these options to the gateway address:

  Gateway System Recovery from the hard - the following are methods to recover or repair the computer using the recovery of hard drive partition.

  • Complete recovery plant
  • Restoration with automatic data backup
  • Windows recovery environment

  See you soon.

• My computer makes a noise but nothing on the screen, theres a light on the modem if

  for the past few weeks that my computer will not start up - which is nothing on the screen, yesterday he started upward and today for a few minutes then froze now cannot get on... I got a blue screen problem as well... do you think that there is nothing I can do or not? I am running windows vista

  Hey doz1990,

  I was not able to locate the specific page for this model computer. I suggest you email or by looking at the manual (if you do not find your they're online too, just use a search engine) and go to them via e-mail or a phone call.

  Looks like it could be a serious hardware problem, but I can't say without more information.

• 3 beeps pause 3 beeps pause nothing on the screen

  3 beeps pause 3 beeps pause nothing on the screen

  Hello

  Sound beeps are error codes that describe a problem with your machine. A continuous beep
  can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
  System/BIOS manufacturer. The model 3 beep indicates similar type problems.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It may have other check so with system Maker or a real computer store (the one that makes its own internal
  service and not of leeks and glances at a Best Buy or other stores).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Equium L10-273: fan of CPU/HDD / lights come on but nothing on the screen

  I have an Equium L10-273 and had to put in a new power outlet in the mobo.
  I removed the wide and electronics. A friend of my put news on that to get back together.

  It sounds if the HARD disc / CPU fan / lights come on but nothing on the screen.
  Have unplugged the cable from the screen and he recovered but not good.

  Any suggestions welcome

  PS: A mobo out on a Toshiba Equium A60-155 will be mine?

  To me, this looks like a motherboard problem.
  In my view, replace the whole motherboard.
  But it s only my personal suggestion, if you want to be 100% sure what's exactly wrong with you laptop, then go you and technician of the notebook check.

  PS: Don't think that a card mother Equium A60 - 155 to insert in the notebook Equium L10-273.

  Greetings