Satellite A100-599: cannot start service Toshiba Power Saver
I have A100-599 with Vista pre-installed. As you know there is that Toshiba Power Saver comes with mobile vista power settings. Not always, but sometimes when I turn on the computer and start windows I get this message "service Toshiba Power Saver could not start.
When I checked in Control Panel-> system-> Services if the service indeed off I saw he did start and run.
Can someone tell me why this message sometimes? It is a software issue or maybe there is a problem with the hardware?
Maybe I m wrong but as I know Toshiba has not designed for Vista operating system energy saver!
Vista uses a power options clean that looks like a little bit like the Toshiba power saver, but not energy from Toshiba!
All laptop computers that are shipped with Vista have any preinstalled Toshiba eve!
OS:-Windows7 Ultimate (32 bit)
On start up to get a service stopped notification - "service TOSHIBA Power Saver was arrested, so cannot be changed".
That is the only other cause the change of Windows 7 known behavior where the Eco Power Saver button is no longer works but the Control Panel/Power Options standard I can select and edit power plans as usual. So it is just an annoying pop up on start up.
Tips to prevent the annoying notification welcome.
Have you tried to reinstall Toshiba Value added Package? It contains current saver where you get this error message. You can download it here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
I also recommend reinstall the Eco utility.
Good luck! :)
Greetings to all!
Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(
Would be happy to be aware of how this problem... Thank you very much.
Current OS: Windpws Vista Home premium sp1.
Post edited by: Airtoground
> but without success.
Does that mean exactly? You get an error during installation or what exactly is going on?
> Only safe mode is available after the installation of this driver
Why only safe mode is available? What happens if you start Windows in normal mode?
And before you start a lengthy discussion: what laptop do you have?
You may notice no problem if you install Windows recovery disk Toshiba?
Can someone help me? I have Toshiba Satallite A100 series with XP SP3 at start up I get an error for maybe 2 weeks ago. My mistake: a fatel error occurred this program will terminate code: oxo (Tosheba energy saving)
How can I fix this error on my laptop?
Thx a lot in advance
I think you should try to reinstall Toshiba Power Saver. The latest version, you can download the Toshiba site:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
Before installing the latest version, delete the old version in Control Panel. Then, restart the computer and install the latest version on the Toshiba site you downloaded.
I want to run Toshiba Power Saver on my laptop.
I have a Toshiba Satellite - T2450 - A200, running windows XP and I badly want to run the program.
I need massive help someone ' one/everyone hehe.
I can't find the program anywhere.
So could someone please find me a link that I can use to download?
I would be very happy about that! Thank you!
You will find on the page of European of Toshiba in archiving BIOS and utilities driver for this good old classic.
But unfortunately, there are drivers XP no., or all the utilities to get that book from the stone age.
Nothing to my buddy.
The guy with the A500-1GL, please, tell me what version of Toshiba Power Saver do you currently have? It is displayed in the menu of advanced power settings.
I ask, because, I suppose, that GST of the toshiba .eu site is pretty old and my laptop came with a newer version. Am I wrong?
Why the version is so important to you?
Important thing is that everything is working properly and portable saves energy if she runs with low CPU utilization.
What operating system do you have exactly?
If you use Windows 7 or Vista, Power Saver is a part of the package of added value.
I have Windows 7 on my laptop. Accidentally, I installed the saver of energy for XP and I can't uninstall it (error 0x7E).
Do you know how to uninstall it?
Normally the Toshiba Power Saver is designed for XP only so I think that's the reason why you can t uninstall it.
In any case, you should try it with CCleaner. This freeware tool can also remove installed programs, as well as s worth a try! :)
I have a Satellite A100-410 and I can't start over (in safe mode ok). When starting, it shows the XP screen and after 10 seconds, the screen goes black. We have re-installed XP but no use. We checked again and assume that something is wrong with the video card drivers.
So we checked for the last but no use. I can boot the laptop when the video card is uninstalled, so it takes to cause something weird.
Or could it be that the card is broken?
For sure your video card is ok, otherwise you may see white screen after switching on. The problem is in the driver problem. Have you downloaded the Toshiba site display driver?
Maybe there is a conflict of driver. This site http://downloads.guru3d.com/downloadget.php?id=1655&file=7&evp=c14f9f3787877ee f9ef4b235b9146e96 stage
Download and install. Then try to reinstall the display driver (if not work, do it in safe mode).
If she's not always you help, do a search for a new iso Windows Xp but not Windows assembly (some guys like to change windows, deleting and adding some files, and then load it. Most of these modified versions are bad).
That's all I can suggest now, sorry if does not work.
There were 15 months and now when I push the power button to start the system, it will not work.
There are 2 blue LEDs lighting but the computer won start t. tried to release the battery and configure power but not luck, with the battery also no luck. On Toshiba that works is the button located under the power button (globe photo with the left and right arrows and a photo of a music note in a display of television or something) when I press this button you hear system starts but after a second or 3-4.
Also tried to remove the memory and hard drive but still no luck.
Sorry, but there must be a serious problem, and I don't think that there is nothing you can do. The idea to start the laptop with power running is OK, but if this doesn't work and you see nothing on the screen, it must be a serious problem.
Of course you do not give any information that you did the last days with your laptop. Maybe you tried to update BIOS?
I have a problem with my laptop, as explained in this link - http://support.microsoft.com/kb/324765. I have the product recovery CD, but don t want to use it if we reinstall windows if I use it.
I'll be able to do things, he explains in the link to solve my problem?
> I will be able to do things, he explains in the link to solve my problem?
Please do not be angry on me, but if this article is written by Microsoft, you should ask them. I presume that they have tested this method before they offered as an official document.
You're right about the installation of recovery. When you use the entire operating system will be removed and installed again.
When I turn on with power supply connected, I get a false error message that says 'Toshiba Power Saver already begun'.
How can I get rid of this message permanently?
I guess that the Toshiba power saver trying to load twice.
Akuma s suggestion should work.
Once the energy saver has been uninstalled, all entries that control energy saver should be removed too.
After this, reinstall the new energy saver
The alternative might be disables a power saver in msconfig.
To ensure that the access the msconfig (in RUN type msconfig) and remove the mark of an energy intake that you might find in the Startup tab.
Then restart the laptop and check if it worked
Is there another URL where I can get a version update of Toshiba Power Saver for my computer drivers laptop Satellite A100 PSAARE other than the home page?
It seems that it is not determinative of CPU fan (he always keep at maximum speed).
Also, I noticed the graphics (GeForce 7600) too loud.
If the monitor is off I can't hear it (just the CPU fan), but as soon as I started working it is audible and as a continuous beep kid.
Is there a (software/hardware) fix for this?
The European driver of Toshiba page is one place where you can get the drivers and tools for your European Satellite A100 PSAARE model.
This time it s a v7.03.07.I Power Saver for Windows Vista!
But I must say that I see no problem of software on your laptop.
Cooling modules and fans have to run with higher performance to make sure that your hardware components may be cooled properly.
Maybe a cooling module cleaning might help to improve the internal cooling and noise reduction.
From time to time, I clean my fans for laptop using compressed air stream and the fans are running more silent.
TOSHIBA Power Saver for W - XP cannot be installed.
Installation error messages: fatal error, abandoned facility. 0x2
Try to remove the part which is installed (visible in Add/Remove Programs), gives the same error message 0 x 2.
Under programs > Toshiba only the help file 'Power Saver Help' is visible, but is not accessible.
Can someone help me?
Drivers and tools must be installed in the correct order!
I googled a bit and found this order of installation for this laptop model:
Windows XP Service Pack3 (RTM)
2 KB898458 KB898458
3 KB936181 KB936181
4 KB936782 KB936782
5 Sun Java 2 Runtime Environment V1.6.0_06
AMD 6 RS780M/MC, RX781 + SB700 Chipset Module V5.10.1008.8
7 AHCI Driver V3.1.1540.61
Processor AMD 8 V22.214.171.124 driver
9 AMD video driver V8.479 built-in
9 AMD M82 / M86 video driver V8.477
10 Conexant CX20561 Audio Driver V126.96.36.199
11 Marvell 8040/8072 LAN Driver V10.57.4.3
12 Synaptics Touch Pad Driver V10.1.7.0
12 ALPS Touch Pad Driver V6.0.305.11
13 V188.8.131.52 Conexant Modem driver
Reader of cards 15 O2 OZ129 V3.23
16 modem region Select utility V184.108.40.206 (RST223MAC02)
17 driver Atheros Wireless LAN Driver V220.127.116.11.0.x32_wCAT
18 Atheros Client Utility V18.104.22.168.0.x32_wCAT
20 V6.2.238.0214 Chicony camera software
21 Bluetooth Stack for Windows by Toshiba V6.10.07T.2
22 Bluetooth Monitor V4.02 (Build20080122)
23 TOSHIBA SD Memory utilities V22.214.171.124
AES1610 24 Authentec Fingerprint Utility V126.96.36.199/V188.8.131.52
TOSHIBA ConfigFree V5.90.09 25
26 TOSHIBA Assist V1.03.00upd4
27 CD/DVD Drive Acoustic Silencer V1.00.008
PC Diagnostic TOSHIBA 28 V3.2.8 tool
29 TOSHIBA Touch ED V184.108.40.206
30 TOSHIBA Hotkey Utility V220.127.116.11
V18.104.22.168 utility TOSHIBA 31
TOSHIBA 32 Control Utility V22.214.171.124
33 Toshiba Power Saver V7.04.02.Q
34 Toshiba zooming Utility (smooth view) V126.96.36.199c
35 GST Init V188.8.131.52
* Note *: not all listed drivers or tools are released on the Toshiba driver page
So install only those drivers and tools that are available on the page of the Toshiba driver and follow the order listed above.
Hi, I can not install driver of toshiba power saver on my laptop because instalation crashes with error 1610: the configuration data for this product are damaged. Please contact the support staff. I tried several versions of driver of standby power. I received the latest official chipset driver... Someone knows how to fix this?
My second problem is with the battery, my laptop running on battery max 10 minutes (I have my laptop for 2 years) and I often force using battery power. Battery can lose so much capacity in 2 years even if I used for my battery once a week?
Sorry for the English and thx for answer
I think that you should not install this driver, the only saving electricity only.
What about the battery? In my opinion, it is possible. In my opinion, the duration of battery life cannot be defined so easy.
Some batteries perform well after 3 years of use, and some of them are dead after only a year.
I brought a new SATELLITE A100 series laptop, during the configuration and installation of new soft, I find myself with that.
1. I am able to install the Toshiba Virtual Sound, it gives error on install start-> "Toshiba Sound only is not supported on your virtual machine".
2 another problem is Toshiba Power Saver, cannot start Control Panel or taskbar, it gives an error Fatel error 0x3F0, I am able to switch between the different profiles using Fn + F2 keys.
One, can help me to solve this problem.
I am using Windows XP Pro SP2.
Thanks in advance.
1.) for me the error message seems very clear. It seems that you have used fake utility Virtual Sound. It is not designed for your laptop model.
2.) I found several assignments with power saver same fatal error 0x3F0 and in each of theses cases the installation of the Toshiba recovery CD has solved the problem.
PS: I want to add some useful information: I checked the page of the Toshiba driver and found two different sets of satellite. Don't mix the two series. It is possible to s that the drivers will not work.
Additional you have to follow the installation guide lines that are in the document on the Toshiba page installation instructions.
Incorrect installation order could be a reason for the driver and the malfunction of the tools
Maybe you are looking for
Almost daily when I try to update my IOS apps in iTunes I get error - ' could purchase < app > an unknown error has occurred. There was an error in the iTunes store' with error 11503. This is the case most of the time but not all the time. If I try a
I bought a Toshiba 394363 DG TV two weeks ago. This model has a problem absolutely disruptive: enter the settings in a long passphrase of WPA2-AES network WIFI (manual or assisted), connection, WIFI works very well. But the next launch of television,
Hello I have Apple Profile Manager configured as my MDM solution and I have created dozens of groups of devices for about 500 aircraft. Now, I need to get a list of my devices (names, serial numbers and groups) for a file that I can read and edit wit
I try to install labview 2012 on my 64 bit Windows 7 system, but fails; Here are the symptoms: (1) I click setup.exe directly and it shows that: (2) if I run it with the administrator, it appears that: (3) I checked that I can execute another exe fil
but the days have passed and still no improvement... how long he thinks I should scream? Tumblr connects fine on PC but not on the BB Torch after an initial successful connection and disconnection. I get my login and my password to opt out, but on P