Satellite A100-756 has finger print reader and remote control?

My notebook there finger print id? The manual says it's but I can't and also it is supposed to be a remote with it but I've not seen a.

Does anyone have any ideas?

I'm sure that the textbooks said that these options are available on some models. If your laptop was original packed in and you have not found remote in the box of the situation is clearer: remote is not available for your model.

In any case, I found info on the remote control to A100-756 and there is advice: remote controller not available.

Tags: Toshiba

Similar Questions

  • Satellite A100 (PSAARA) - I can not use the remote control

    I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

    Thank you!

    If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
    If this does not help please let us know.

  • The sensor validity finger print reader and windows 7

    I recently installed windows 7 Enterprise 64-bit on my dv4t-1300cto. Everything is great except for the fingerprint reader is not working. It appears in the device as manager being installed correctly, but windows and digital persona say its not connected. I tried a few reinstall software and drivers, but nothing helped. And when I look for software, the results are quite rare. HP tries to convince me that I'm using a beta version software and support will appear soon, but is not a copy of version beta what whatsoever. Everybody do what ive made and it sorted?

    the drive model is Vfs201.

    Thank you all.

    @engrarielmr

    Hello

    Check the linke below:

    HP SimplePass Identity Protection, validity of fingerprints fingerprints and Windows 7.

  • Satellite A100-756 - lost my recovery disc and need a new

    Hello!

    I managed to misplace my recovery disk.
    Nobody here does not know how or where I could get a new, I might even download the software and burn the dvd myself if that would be necessary.
    I really need to clean my pc.
    I hope someone can help to :)

    + Best regards Johan. +

    You must contact an ASP. They can order a new disc of recovery for you.

    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  • Need driver for Windows 7 device and software Instalation for Microsoft Keyboard with Finger Print Reader

    Hello, I bought a MS Keyboard with Finger Print Reader (product ID: 75913-545-1980296-00611) recently of a *. May Hae product on a shelf for some time. I have Windows 7 on my PC and the instalation software says it's incompatible. Have you folks instalation software compatible for your product? E-mail address is removed from the privacy * I am a technician certified a +. If you could direct me to the right site with the appropriate software, or email it to me, I would appreciate it. Thanks for any help you can give. Sincerely, Frank Nunally

    Hello, I bought a MS Keyboard with Finger Print Reader (product ID: 75913-545-1980296-00611) recently of a *. May Hae product on a shelf for some time. I have Windows 7 on my PC and the instalation software says it's incompatible. Have you folks instalation software compatible for your product? E-mail address is removed from the privacy * I am a technician certified a +. If you could direct me to the right site with the appropriate software, or email it to me, I would appreciate it. Thanks for any help you can give. Sincerely, Frank Nunally

    This is a forum for peer-to-peer and this product is not compatible with Windows 7 - so - don't.  Microsoft is not what you need.  Should have read the list of compatibility (operating systems) probably printed on the box.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-Ms-keyboard-with-fingerprint-reader/43918b4b-7368-4569-aa13-b7337192f3f4

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-keyboard-with-fingerprint-reader/5e9fcad4-20e1-4440-a4ae-47b1fb47798c

    But be sure to check here:
    http://www.Microsoft.com/hardware/en-us/support

  • Satellite A100-756: browsers close attempt to download files from the Internet

    I bought a Satellite A100-756 just before Christmas and it has been running XP Pro SP2 absolutely fine without any problem.

    I've upgraded to Vista Ultimate this weekend and I can't download files to PC from the Internet using ANY web browser I installed.

    I dropped all the security settings just in case it was the cause of the problem but still can not do.

    If I click on a link to downliad an exe file, for example, the Run/save/Cancel dialog pop up, if I click on RUN it run the application, but if I click on SAVE, the browser closes right down.

    The same thing happens if I'm going to transfer a system file to MySpace or one of my web servers via HTTP.

    I tried IE7 +, FireFox & Opera and all do the same thing.

    It's the exact even if it is a pure install or an upgrade, and the same copy of Vista works fine on all the other machines I have here (I installed to test just in case it's a Vista only bug. it's only the Toshiba that has the problem.)

    Nothing is written to the event logs, or error report.

    Someone at - it ideas?

    Hello

    You solved this very strange problem?
    I m very interesting because I ve google around and don't find advice or similar problems.

    Have you checked the settings of Windows Defender?

  • Satellite A100-756: no option in the BIOS to change the CPU usage

    Hi guys,.

    recently bought a satellite A100-756 laptop with core duo of intel clocked at 1.86 Ghz. When you look in the BIOS (version 2.00) the only options allotted to me is to dynamically the CPU frequency mode are 'always low, or dynamically switchable. There is no option to set the processor to operate at "still high". my friend who has a 2 years old satellite said that, on its model, there is the possibility to "still high".

    Toshiba HWSetup also lists only the mode options for dynamic as either «always low or dynamically switchable» cpu frequency I was wondering if anyone has done to put the option to always high, or if there is an update the Bios or software Toshiba that would allow this option for 'high alyways?

    Congratulations for all help people!

    Hello

    As you may knew that the Toshiba Power Saver tool is preinstalled on most Toshiba laptops.
    This tool allows to change the CPU, the speed of processing, cooling method, using standby and hibernation, etc.

    To change the speed of the CPU or the cooling method, you will need to enter the energy saver, then select the basic settings tab.

    PS: All these settings can be configured for a different power profiles. Therefore, you must configure the settings of the profile that you will use for most of the time.

  • Vista drivers for finger print Reader on a Portégé R200?

    Help, please
    I have a R200 model originally shipped with Windows XP, now have Windows Vista Business Edition installed & have problems to make Finger Print reader to work. I tried many programs Windows is said to have installed properly, but they all State that the player is not connected?
    I tried so many times to let him work and looked at the site factory drivers or software, but nothing.
    Seems very strange for a laptop Toshiba, not not working completely, even when it says on the sticker of the OS Windows Vista Capable?

    UM

    Hello

    where to download the drivers? Maybe on the European Web page? Here are some links with toshiba driver download pages where you can probably find some drivers you need:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Toshiba - download

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
    ToshibaUSA

    http://209.167.114.38/support/download/ln_byModel.asp
    Toshiba of Canada limited - drivers and downloads

    Welcome them

  • Finger print reader does not work after upgrade to Windows 8 Pro - DM4 2055BR

    I updated my previous Windows 7 to Windows 8 Pro Edition and the Finger Print Reader no longer works. Validity software driver is already installed more simple pass, but when I run the Easy Pass it pops up the message "the drive is not connected, connect the drive.

    I noticed one lot of other posts related to the same issue, but I don't know if the model of my laptop does not support the new version of the operating system.

    I appreciate if someone could help me with this problem.

    Dulao35,

    Welcome to the HP Forum!

    When start you / see: Easy going on?

    You may be running HP SimplePass Version 8.0.0.57 or some other SimplePass 8.x?

    ======================================================================================

    You can run HP SimplePass Version 6.x later on your computer.  You may also be able to get SimplePass version 8.x if you want to stay with this version to work.  It's a personal choice, really - either version should be able to work on Windows 8 Pro.

    Note that the version 8.x SimplePass seems to dislike everyone, but the Internet Explorer browser. This is a personal observation and NOT what can known by other users.  If you use IE, then the point is moot.

    You can probably keep your existing driver of the fingerprint (Validity Sensor in the Device Manager) as long you run the version compatible with Windows 8, illustrated to the webpage of your computer driver:

    HP Pavilion dm4-2055br Entertainment Notebook PC Drivers

    See below for a method that you can use to upgrade HP SimplePass:

    Simple Instructions for upgrade HP SimplePass

    The bits on SimplePass version 8.x are towards the bottom of the file.

    Click on the star of congratulations !

    It's a nice way of saying 'Thank you' for help.

    Although I strive to reflect best practices of HP, I do not work for HP.

  • Satellite A100-756: where the microphone?

    Hello.
    I just bought this computer (Satellite A100-756) 2 days ago, and in the manual it says he built into the microphone, but I can't find it.
    I was trying to voice chat on MSN messenger, but the other person couldn't hear a thing.
    I have this light manually? If the answer is "Yes", if you please tell me how to do it.

    Thanks for your help.

    Hello

    I checked the features of this unit, and according to some descriptions internal microphone is NOT available. There is a mic jack. Here, you can connect the external microphone.

    It is possible that some units of this series support and are delivered with the internal mic, but not the Satellite A100-756's.

    For most operating instructions describes all the features on the series of the laptop. But not all units support all features.

  • How can I get driver for Satellite A100-756 a package?

    I just bought a Satellite A100-756 built on Windows Xp home edition. I would like to change the operating system to Professional Edition, but I have no computer available pilots, they didn't come with my computer package.
    I just had a product dvd recovery that I assumed that it install the operating system complete, included the drivers.

    I tried the drivers at Toshiba web page and I found many of them he but I am confused now, I don't know what drivers I need, and those who don't.
    Can you me both if I can find a specific driver for my laptop package and where can I find it?

    Thank you.

    Hello

    Before you anything start Toshiba Assist and go to Protect & Fix tab. You will find the option to create Tools & Utilities CD. When you install your own OS use for installing drivers, tools and utilities.

    Good bye

  • Finger print reader does not connect for Win7 Logon Screen

    Win7 Ultimate 64 bit

    5.9.4 fingerprint software

    Biometric accepted link to windows Logon

    Client Domain Server MS

    At the start of the system, the logon screen appears and the fingerprints light is 'on '. I scan my finger, the light blinks once and no presentation of the Windows password in the logon window. I have to enter password.

    Lenovo support asked me to uninstall software, of the clear BIOS saved digital fingerprints then re - install (and re-record). I did it twice without any change.

    It worked until I had to break the connection of field (server change) and re log on to the domain with the same opening of session and password. It was at this time that the finger print reader stopped passing the biometric password to the BONE.

    Any thoughts on how to re - connect the reader to open a session?

    If you enter the control panel and search for "biometric" you should have an option to 'change the biometric parameters '. If you click this option, you should have a checkbox indicating "Allow users to log on to a domain by using their fingerprints", make sure that having checked if you want to connect with a domain account using your fingerprint. When remove you / add the computer to a domain, so I believe that this option will be restored back to being disabled must be re-activated.

    -gan

  • HP Pavilion dv9700t Finger Print Reader

    Sorry, I'm new to this, so I don't really know what I should add can help people. in any case, I have the HP Pavilion dv9700t laptop and about 6 months ago my Finger Print Reader stopped working all together and said it is not detected when I try to use it to connect. I tried to download the drivers again, but he did nothing.  I am running Windows Vista and update as soon as I can. Anyone know if this could be a problem?  I'm not hard with my laptop, so I don't think that it is because something fell out of place, but I don't know, because I don't know how to open upwards and don't want. I had the extended the warranty, so I just need to send it in, but I use my computer every day and don't really want to part with it as long. Thanks for any help.

    Check Device Manager, check the personal identification device driver, see if the driver works correctly.

    If it was a software problem, uninstall the current driver and try one of your support page.

  • DV6 Finger Print Reader unrecognized or does work not

    After restoring my laptop (Pavilion dv6-6121tx) a few days ago, I decided to get the most recent drivers.
    I stopped to do, I upgraded HP Simple upgrade to version 6.0 (this version was not listed in the drivers for my laptop, I found it on the AuthenTec Web site).
    Surprisingly, he did not detect my fingerprint reader.
    so I decided to uninstall it and install the 5.3 version (this version is listed in the drivers for my laptop on the HP website)

    and even once it does not recognize my device.
    so I uninstall this version and went back to the old version 4.3 and still the problem was not solved.
    Finally, I uninstalled HP Simple Pass and validity sensor driver. and reinstalled using the typical recovery manager "reinstall drivers and applications.
    It still does not work!

    Whenever I uninstalled it a version, I deleted my identity with him.
    and my fingerprint reader does not even appear in the Device Manager. However, it is an unknown device listed, but I'm not sure if its my finger print reader.

    Ask for any other information you need...
    even ready for assistance remotely.
    any help would be greatly appreciated...

    Yay for me...
    Finally, it solved my self...
    Remove data from print finger, uninstalled the driver both col simple, rebooted my computer laptop and then installed the driver... reboot again, installed Simple pass... and viola! its been...
    BTW use validity sensors version 4.3.304 and HP Simple Pass 6.0.100.252

    they are much more better that my old drivers... and do not appear in the list of drivers for my laptop on HP.com!

  • Finger Print Reader no longer works after update from Microsoft on the HDX laptop

    The stop Finger Print reader work shortly after Microsoft Update, HDX Premium, Vista 64 bit, after a regular update of Microsoft Fingerprint Reader became sporadic. I have been instructed by HP to download the software from the HP (Digital Persona Fingerprint Reader Software) website. It gives me an "error message 1321. The installer of the sufficient privileges to modify the file C:\Windows\system32\DpPwdFlt.dll.' after failing to install it and then restored install it and then it after that I can't use my Finger Print Reader to log even when booting

    Hello

    Try right click on the installer of Digital Persona, and select 'run as administrator' to see if this will allow to complete the installation

    Concerning

    DP-

Maybe you are looking for