Satellite A100-784 - connect to the TV via a HDMI cable

Similar Questions

• Z580 help: connect to the TV via a HDMI cable

  I recently had my father the IdeaPad Z580. It is really eager to stream its videos and watch them on TV. I connected it today via a HDMI cable and got really excited when the screen was reproduced on the TV... but then, when I clicked on internet Explorer tile, I got the following error message:

  This application cannot open
  The screen resolution is too low for this application to run.
  Change your screen resolution

  Seems simple enough... but really did not have a clue what to do! Doesn't help that I'm a complete newbie to Windows 8!

  I'd be really grateful if someone here would be able to help / tell me what to do! ^^

  Thanks in advance!

  All of a sudden it works without enaything. In fact, I just do a windows 8.1 update.

• I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

  Original title: deleted Ethernet adapter

  Hello

  All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.
  I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.
  First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.
  I tried to insert Dell drivers and utilities disk, but that does not change.
  I tried to download on an other computer files from dell that look like they are pilots.
  I tried to set up a new connection
  None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?
  Thank you
  Kevin

  Hello

  1. what you're trying to fix by running registry cleaners?
  2. How did you remove Ethernet card?
  3. How are you online using other devices?
  4. What are the devices are?

  Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• L750 satellite will not connect to the TV via HDMI and stops

  Hello

  When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

  I tried all the HDMI ports on the TV and the different HDMI cords without change.
  Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

  Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

  Is it possible to change/upgrade, that?

  All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

  Thanks :)

  You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
  The HDMI isn't limited to a certain TV interface.

  The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

  In your case, there is an open question about preinstalled system.
  Do you use the operating system preinstalled by Toshiba or did you change it in the past?

  If you have changed the system, the problem could be linked to the preinstalled graphics driver.

  However, my recommendation is simple:
  First of all I recommend you to reinstall the graphics driver.
  First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

  Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
  In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
  Now connect the laptop to the TV using an HDMI cable.
  Turn on the TV and then laptop.
  Shortly after, use the function FN + F5 keys to switch to the external video output.

  Good luck!

• Satellite A100-784 - I lost the recovery disk

  Satellite A100-784, I had, but I lost the recovery disk and I want to restore the PC

  What should I do?

  Pleas help me

  You should contact the ASP in your country if you wish to order a new.

  But if you want to restore only the operating system installed you can then also use a clean Windows CD.
  After installing Windows, you can download drivers Toshiba of the European driver Toshiba page!

  concerning

• Satellite A100-158 connects to the WLAN but not to internet

  I have a Satellite A100-158. It is used to disconnect frequently the network wireless in my house, but now even if the connection still appears on the program of Intel PROset/wireless and is shown as connected, I can not access the internet more. I don't know what the problem might be that the wireless signal is excellent.

  For the moment, I plugged the Ethernet cable to the router to access the internet. Does anyone have any suggestions as to what could be the problem?

  Hello

  I can't provide the exactly the solution to this problem of WiFi, but I think you should check the whole parameters on the WLan router.
  First, you must remove all security settings such as encryption key and MAC address filtering.

  Then check the settings of the laptop. If you use a Wlan configuration tool as Utility Intel ProSet windows has the configuration option must be disabled!
  In addition, access the Wlan properties and check the TCP/IP protocol settings.
  The IP address, subnet mask, and the default rejuvenation should be set to automatic

  Good luck and look at a few

• Satellite A80: Failure to connect to the internet via an ethernet cable

  I'm having problems to get an internet connection via a cable ethernet to my office. The laptop works everywhere else, but not in the office. The strangest thing is that my desktop at the office computer works perfectly with the same cable.

  The icon in the taskbar of configfree reads "MARVELL YUKON 88E8036 PC... 169.254.95.8"no matter how many times I disconnect and reconnect it to my office. Curiously, the IP Office when it is connected to the same cable is 192.168.1.69.

  I was told to change the tcp/ip properties manually, but I'm not able to do because I have not all entries in the NETWORK CONNECTIONS or can't seem to create a new.

  I would be grateful if anyone has any suggestions.

  Hello

  I wonder why you have no entries for network connections.
  Click Start-> settings-> network connections-> connections to the Local network-> properties

  Select the Internet Protocol (TCP/IP), and then click Properties.
  If you use a server in your office and the IP address is assigned automatically then all TCP/IP parameters must be on automatically

  Check it!

• LAN Internet - unable to connect to the Internet via a LAN cable

  Hello

  I have an ASUS F3S laptop series running on Vista.

  I went on vacation in early June this year and when

  I got home that I could not access my internet broadband via the bootable.

  I have an another old laptop which works fine using the local network.

  I use the ASUS at work and you can get the internet via wireless LAN.

  When I try to go online using the LAN laptop trying to access the internet

  using the mini port WWAN and not the LAN port.

  I have tried to replace the drivers and in desperation, have used the recovery

  drive to get Vista back to its original setting.

  I still do not have access via the LAN port.

  Any ideas?

  Sanquay

  You must re-create the network connection Wireless LAN (remove the current which is probably set to use the mini port WWAN and create a new one) and specify the LAN port during installation.  This should solve the problem. Check out the following articles for some detailes, suggestions, troubleshooting instructions and general information that may be useful.  Pay special attention to how to remove a wireless/network connection as it differs from a regular connection, and if not done correctly can continue to exist when you think he's gone (and the system it shows same gone but is not).

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Canning Internet connection drops when the computer is connected to the PS3 via an Ethernet cable.

  Original title: Shared network problem

  I am trying to use a shared network, configure as follows. My computer connect wireless to my router. My PS3, however, seems to be really slow when connecting wireless to the router and is at a proper speed when connected via ethernet. So, I have my PS3 connected to my computer with an ethernet cable. I put the wifi connection to be shared. Next, I set up my PS3 to connect to cable internet. Has gone through the steps and connected properly and at full speed too. However, there is a problem. My PC guard 'give up' connection to my router, while remaining connected to the PS3. I have to manually connect to my router again, regardless of the connection automatically option. Almost as if my PC is to use ethernet for internet access, (which he won't get that which is connected to the PS3) and so it loses the wifi connection. This abandonment happens around every 5 minutes or more.

  Is it possible to keep my PC connected to my wireless router and still be connected to my PS3 through ethernet to connect my PS3 using my PC?

  The problem seems to have 'fixed itself. I tried messing around with the connections that would not work even the bridge. Then I've switched back to ICS and did not have a disconnect since then.

  So the problem is now resolved, but don't know how?
  Whatever it is, I am very grateful for your help Manasa, it is well appreciated!

• Satellite Pro C850 - 1 K 3 can't connect to a TV via an HDMI cable

  If I use either F4/the windows key + P and select duplicate or PC screen only (or another option) and then plug it into the TV, so the laptop screen and the TV screen are blank. By pressing any key does not display anything on my laptop screen, then when I unplug the HDMI cable that it happens with the second screen only option highlighted. My laptop strangely ignores what I click and returns continually to this option and unfortunately, I can't project the screen on any monitor (I tried 4 separate monitors).

  My laptop was able to be plugged into a TV and I did this several times, but as far as I know this stopped when I had a windows 8.1 update (my assumption, I don't know). I searched the web for solutions, and none have worked. I tried the method of detection of the monitor through the resolution on the desktop option, but again, this cannot be done because I don't see anything on the screen when my laptop is plugged into any TV, and I tried many times.

  Any help is appreciated

  Thank you very much

  I use Toshiba laptops a few years now and what I can say is that you need to connect your laptop to the TV first, select the right port on the TV and then use key FN or F to change between TV Office laptops and connected.
  Connected TV or another external device must be established first.

  Please test once more.

• Satellite L500-13F connected to the TV with an HDMI - no sound on the TV cable

  Hello! Sorry, my English is bad.

  I have a problem, I tried to connect my laptop with TV via HDMI, but
  reading on laptop rather than TV sound...
  In Manager Realtek HD I found no "Options for HDMI output.

  Please, which suggests what should I do?

  Hello

  Have a look here, maybe it helps you:

  http://en.kioskea.NET/forum/affich-79711-laptop-sound-on-TV-with-HDMI-cable

• Satellite C55D - no sound on the TV using an HDMI cable.

  Hello

  When I connect my laptop via hdmi cable to the TV digital sound is heard through the speakers, but not on TV.
  It worked well before, not now.
  Everything is connected, I tested with new cables. It is set up.
  Devices, it seems that none connected.

  Help, please?

  Try to activate sound output manually in the sound properties. What entries you can see in the devices section of reading?

  

• Satellite L650 - no sound on the TV using an HDMI cable

  using a HDMI to connect to the TV picture cable works fine but no sound through the TV, sound out of speakers to computer. How can I configure so sound comes through the TV?

  Hello

  Usually it should automatically work but try it please check the settings in the sound properties > reading.
  Switch off the speakers and turn on the digital audio device (HDMI).

• Connection to the TV with an HDMI cable

  I have a HP G60 laptop with Win7. When connecting to a TV with a high-definition HDMI cable, all I get on the TV screen is my screen background image. No icons, no cursor, nothing. It worked the last time I tried it about 6 months ago.  The graphics settings are like a "expanded" monitor, which puts only annoys me anything.

  try to use the Intel® driver update utility you may need new drivers of HD.

• Pavilion 11 x 360 pc cannot connect to the tv with an hdmi cable

  How to connect my laptop to my HD TV with a HDMI cable? I have tried all of the suggested routes, checked the TV and cable, but still get a blank screen. Are there updates or I need to install drivers?

  rochpellets wrote:

  How to connect my laptop to my HD TV with a HDMI cable? I have tried all of the suggested routes, checked the TV and cable, but still get a blank screen. Are there updates or I need to install drivers?

  Hello

  Exact model name/number, operating system 32 or 64-bit?

  Have you been good Page 24 and 25 of the present user guide for HP Pavilion PC 11 - n001xx x 360.

  Also, try a hard reset before trying.

  It's the latest Intel graphics driver for HP Pavilion 11-n001xx x 360 PC Windows 8.1 (only supported OS).

  Follow the user guide & check again.

  Thank you