Satellite A100-912: Vista Capable isn't looks really capable?

Similar Questions

• Satellite A100-912 (PSAA9E) a device is missing after installing Vista

  Dear,

  I recently received a Satellite A100 - 912 (PSAA9E). Windows XP Home was preinstalled operating system. But when I installed Vista Ultimate, the Device Manager shows that a device is missing pilot. Its properties show that it is located on PCI, device 6 7 Bus and function 3.

  I downloaded the drivers all listed for the toshiba site system. So, can someone tell me what device it is and where I can find the driver for it? All devices such as the display, sound, modem, lan/wlan, player card, fingerprint reader, buttons of media multi burner Super multi and touch to touch work well.

  Hey Buddy,

  I Don t really know what device it is, but you can for example try a linux live cd. The live cd lists you start a list of pci devices so you can find that materials are in your machine.

  Alternatively, you can perform a search in google for 'list of pci Vista' and you might find some pci list of tools that can help you get information about unknown material thjat.

  Welcome them

• Satellite A100-912: How can I get a upgrade DVD Toshiba step by step

  I bought a Satellite A100-912 (with XP installed). Now, I'm upgrading to Vista Ultimate. I don't have the Toshiba Step By Step Upgrade DVD; so, how can I get (or buy) a copy of the DVD?

  Hello

  Usually, it must be delivered with the Toshiba Windows Vista Express Upgrade DVD.
  I put t know why you received this CD but perhaps article Toshiba we could help you.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlView.jsp?soID=1693760&BV

• Upgrade memory on a Satellite A100-912

  I am the owner of a Satellite a100-912 and I want to improve his memory!
  As it seems, this model supports only the modules SODIMM DDR2 PC2-4200 (533 Mhz). Before the purchase of a memory module that might regret, I want to know if there will be compatibility problems if I use this module of PC2-6400 DDR2 SODIMM for notebook (800 Mhz).

  Will it work, even at low clock speed (533 Mhz), or it's going to be a total waste of money?

  As far as I know that the FSB is capable of managing modules to 667 Mhz.
  You can use the lower modules (533 Mhz) without any problem but modules with superior Mhz will not work at full speed because of the limit BSF.

  So I t recommend buying 800 Mhz modules. First of all, they are not supported and secondly it s waste of money!

• What drivers do I need for my Satellite A100-912

  When I open the driver www.toshiba.com page, I saw a series below books
  A100-S2211TD
  A100-S2311TD
  A100-S8111TD
  A100-ST1041
  A100-ST1042
  A100-ST3211
  A100-ST8211

  He was not listed on my laptop. My laptop model is A100-912.

  Hello Murat

  Problem is that you can't find your model of laptop (Satellite A100 - 912 (PSAA9E)) on the Toshiba US Download pages and only you should use is Toshiba Europe page under http://eu.computers.toshiba-europe.com/

  American books have different model description as the European specifications. I checked your other job offers, and I assume you are trying to find the Vista drivers. Am I wrong?

• Problem of the Satellite A100-912 usb external HARD drive

  Please help guys!

  I installed Win 7 32 bit on my laptop Satellite A100-912. Everything works perfectly in addition to having problem reading external usb HDD (disk appears in disk management, but are not accessible). These discs are not defective, because I use them on some other Pcs. Thumb drives are not a problem at all. Tried to use the self-powered USB hub but without success. Not sure if this is a related issue of Bios or a material limitation of this device. Thank you!

  > Everything works perfectly as well as having problem reading external usb HDD (disk appears in disk management, but are not accessible).

  The HARD disk appears in disk management, but you see the additional HDD in my computer?

  I don't know Mr. what could cause this and he s strange that you cannot access the USB HDD, even if it has been recognized correctly
  Maybe you should try updating the chipset driver.
  Chipset driver controls the ports of interface USB/so it of certainly worth a try

• Satellite A100 running Vista - no hibernation function

  Hello

  I have a satellite A100 with Vista Home Premium installed and everything in-house, a cleaning disc I selected a folder called Hibernation to remove and now I am unable to use the hibernation feature.

  My laptop with Vista preinstalled so venus im failed to insert the disk to fix this problem.

  All ideas are welcome,

  Thank you...

  You can try using System Restore which is part of the Vista operating system

  Try to set the BONE to the beginning of time until you've cleaned the disc

  Check it out

• Can not install device driver USB IRDA Kingsun on Satellite A100 with Vista OS

  I have a USB IRDA Kingsun device that worked well on a desktop with XP but my Satellite A100 with Vista defies installing the drivers that came on a CD with the IRDA.

  How can I install or does anyone know one that works with Vista?

  Hello

  If you are not able to install the 3rd party device IRDA driver on Vista, it seems that the disc is not compatible and don t support Vista.
  Seems you have to contact the manufacture of the IRDA device and ask the compatible reader

  But maybe that you're unlucky and the Vista driver does not exist?  :|

• Satellite A100-912 has a few screen problems

  Hello

  I have the Satellite A100-912 with WXP and up to today, there is no problem.

  I don't know what happened, but a few hours ago, screen started flashing and colors have been mixed.
  I tried to install the new drivers, but it did not help so I hope that someone here could tell me if I can fix it somehow or its some hw question...

  Thank you

  Hello

  It is very important to know if this problem is caused by faulty material or because of software. To be 100% sure I recommend you to use a few methods.

  First try to connect the external monitor to your laptop and please check if the same thing happen on the external monitor. If so the reason may be the faulty graphics card. Otherwise, you can also install OS using recovery delivered DVDs. After doing this you will have factory again and the good drivers will be installed. If the problem persists, it may really be due to faulty hardware (graphics card or screen).

  Sorry, but it's really not easy to say with certainty what the problem is here. Please do not wait too long and if the guarantee is valid that the technicians check your laptop. The warranty will cover all repair costs.

  Good luck!

• Made by Satellite A100-912 supports internal microphone

  Dear Sir.

  I have a Satellite A100-912.
  Next to the volume control, I can see a small opening, I thought at the beginning that the microphone.
  But unfortunately it wasn't, or I don't know.

  I opened my settings and I have not found any installed microphone or work.
  Y at - it a microphone. on this machine?
  And if there is how enable or install it?

  If it is not what is this opening next to the volume control?

  I wonder why you take n t a glance in the user manual?
  These details and s information should always be mentioned in the user manual!

  To my knowledge, this laptop DOESN T supports an internal microphone.

  Good bye

• Satellite A100 - need Vista 64bits Mass Storage Controller & TOS1901 driver

  I have a notebook "Toshiba Satellite A100-049" who has the ability to support 4 GB memory (but which came with 2 GB) and I'm unable to find some drivers for it on the site Web of Tosiba. I put a second hard drive in the laptop (although far from my normal 32 bit Vista installation) and test Windows 7 64 bit. I currently have 2 GB of memory. I have most of the drivers, but need:

  * Mass Storage Controller
  * Unknown Device - TOS1901
  * According to the "Action Center", I also need to install "Intel Management Engine Interface". I suspect this is related to the mass storage controller.

  I searched the Intel site but without knowing which chipset etc... my laptop uses, it's like looking for a needle in a haystack.

  When I installed Vista 32 bit, I had to install the package of value-added and supervisor password utility.
  The problem is while I managed to find a value-added Package 64-bit I can't find a Supervisor Password Utility 64-bit.

  I understand "Unknown Device - TOS1901" supervisor password average Utility.

  Where can I find drivers for 64-bit for this and also the mass storage controller?
  Even if they are for another model (but fine installation).

  Thank you

  PS - If I can't find the drivers I'll send a letter of complaint from Toshiba to sell a laptop capable of 4 GB of memory but absolutely no way to actually do this. Response from Toshiba a while ago (when I asked) had to settle for 3 GB on 32-bit Windows. It is not really satisfactory to lose 25% of your memory.
  That was before I had installed 64-Bit Windows.

  Hi Brad

  As you can see here, nobody can offer the correct answer. Problem is that this model of laptop is not supported for Vista 64-bit and you will be unable to find the Toshiba drivers, tools and utilities that are designed or tested with your model of laptop.

  Maybe you can try to install the other laptop satellite model tools, but there is no guarantee that it will work properly.
  Sorry :(

  Maybe you should use 32-bit Vista support

• Satellite A100-926 Vista driver

  I have a lot of problem with BT and Irda driver, because I can't find the driver for Windows Vista. What kind of driver, can I use? I can't believe that toshiba do not release the driver for Windows Vista!

  Thank you
  direct them

  Hello Silvio

  In one thing, you're right. At the present time there is no drivers for Satellite A100 Vista, but it's just a matter of time when they will be ready for download as A100 worth laptop capable of Vista.

  Back to your problems: as the fat that I know about Satellite A100 - 926-IrDA is not available, and because of that I n t understand what kind of problems you have. On BT I can recommend you to visit http://aps.toshiba-tro.de/bluetooth/ under download you will find BT for Vista. This is the version 5.10.01.

  Good bye

• Satellite A100 - 599 Vista-> now I need XP drivers

  Hello

  I may be stupid, but I need help...
  On the toshiba site I have not found all the drivers xp for this model. I just bought a Satellite A100-599, and it has Vista on it, after using Vista for a while I realized that I need to go back to XP, and since the laptop is shipped without drivers xp that I had to search the driver database only when I press on my model, it says "sorry, but this model is not available for the region.

  I even tried to change, but I still get the same problem. OK, after that, I tried to use this search engine to stupid driver it doesn't have a filter to work. Insted of show me only the driver for my model, I show all the drivers for all models.

  If anyone knows where I can find drivers for xp for this model pls plan a response. Thank you

  Post edited by: blackmodjo

  Hello

  I don't really know what you're talking about. Your laptop model is listed for a long time and I do not understand where you found this satellite 3000.

  Go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp and choose your model of laptop with good description. All that s!

  Sorry, but I don't think there is a problem with professionalism, but only with you and the way you're looking for info on the web page.

• Satellite A100 - ATI Vista driver moved - cannot read from device

  Hello

  I have the following problem:

  I downloaded the official Toshiba mobility driver for Windows Vista 32-bit (I had a Satellite A100 (PSAA9) for construction in mobility x 1400.

  Once I run the Setup, it will install the ccc, but the real driver, no matter what I do! If I try to install the driver manually, Windows says

  "Unable to read from the device (ATI Mobility X 1400).

  As an error during the installation. It will not work in safe mode, either.
  If anyone can help? Thx a lot!

  Greetz Jens

  Hello

  First are you sure that you have an ATI graphics card?
  The Toshiba driver page provides 2 different graphics drivers for A100 PSAA9E series; nVidia and ATI.
  Find out!

• Satellite A100-803 - Vista recovery problem

  Hello

  I upgraded the RAM and HDD on a Satellite A100-803 and when I restore Windows Vista from the recovery disk process is going very well, but after restarting windows says that "Windows Setup could not set up Windows on this s material.

  I think that the problem is listed here.
  http://support.Microsoft.com/kb/2466753/en-us.

  But the problem is that I can't change the RAID setting in the BIOS, and during the installation of recovery, I'm not able to add the additional drivers needed.
  The new drive is a WD 500 GB driver (WD5000BPVT)

  How can I solve this problem?
  Thanks in advance
  Pau

  Hello

  First I put t think its BIOS problem.
  The laptop doesn't support RAID.

  I think the problem is the size of your new HARD drive. Upgrade of the disk HARD 500 GB and its larger than the original HARD drive equipped in A100.

  The point is that a recovery disk automatically creates the partitions on the HARD disk, but due to the size of the disk HARD the size of the partitions would be different also.
  I think that you won't have the same problems to install Vista or Win 7 using the Microsoft disk