Satellite A100 doesn't detect camcorder connected to the firewire port

Similar Questions

• Satellite A100: To receive data can I use the remote port IrDA?

  Hello

  I have an A100 which has infrared, which is used for the remote control supplied with the laptop. I was wondering if this infrared receiver can be used for other devices (e.g.: mobile phone) other than the remote control.

  I checked the control panel and Device Manager and both have no infrared information, but I thought that it would be always necessary even for the remote control.

  Help, please.

  Thank you.

  Hello

  I think that it s not possible to use the IrDA remote control window to receive files or data.
  I wonder how it should work if you don t have IrDA options in Control Panel.

  If this option is not available in the Control Panel, you cannot activate the IrDA and you can't assign a download or download the IrDA connection. So in my opinion you can't use it as a connection port.

  Unfortunately ;(

  But I found external solutions. If you want to use the IrDA, you can buy a USB IrDA key. I didn't test this device, but other people on the net have used it and it works.

• Satellite A100-192: is it possible to add the DVI port

  Hello

  is it possible to add the dvi port to this laptop?
  ati mobility radeon x 1600 graphics card is the chipset
  supports the dvi and analog component output

  is it possible to add the dvi port
  or component signal output on the d - sub port?

  TIA

  Hello

  There is unfortunately no way to add a DVI port to this machine. The problem is there is no adapter for D - sub to dvi and you can't go to the motherboard of your machine with a DVI connector.

  Boyfriend sorry but it is a fact...

  Welcome them

• Satellite X 200 PSPBUA cannot capture video using the firewire port

  Satellite X 200 PSPBUA 00N007

  I try to capture dv video from a camera via a capture software but is not working/errors generated.

  Tried Pinnacle and free software that do not work. Texas Instruments 1394 OHCI driver exists and works OK.
  Satellite X 200 PSPBUA 00N007 upgraded to Windows 7 64 bit.

  Any suggestions appreciated

  > I'm trying to capture video from a camera via dv capture software but is not working/errors generated.
  What happens exactly? This error message do you have?

• Satellite A100 - cannot get an Internet connection

  Hello

  I have a Satellite A100 and I can't connect to internet after seeing my reg / cleaned by uniblue, and for the love of me can't get a connection.

  I eat to get my hub connected to the internet, but my laptop just will not allow connection, it's a MCE and it works perfectly fine. I had so many divergent answers at different addresses, all ways said it that another provider has control or error 678. It seems that it's a question of access between the provider of my IP and my system provider does not communicate through this PROTOCOL and my XP PROFESSIONAL system.

  Can anyone help please?

  Hello

  To be honest your ad is a little difficult to understand, and doesn t contain all important information.
  Can you connect to the Internet through WLAN or LAN?

  What happens now exactly if you are trying to establish an Internet connection?
  Your router can connect to the Internet? What is the status now?

  If you have problems with your internet provider you must contact them directly. They can check your connection and make sure that you use the right connection information.

• drivers installation for OfficeJet J6450 on Windows 7 (64) and the software doesn't detect USB connection

  I install the drivers for OfficeJet J6450 on Windows 7 (64) and installation software doesn't detect USB connection.  I recently had to upgrade Windows 7 in Place.  The printer was working fine before the upgrade.

  Hi shconner,

  Looks like you need to uninstall what is already installed. Restart the computer and use the software features on the Web site to reinstall the printer.

• Satellite A100: drive is not read most of the dvds

  I have a Satellite A100 with the following specifications: [information on PC]
  Model name Satellite A100
  Part number PSAA9E-xxxxxxx
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.30
  Processor Genuine Intel(r) CPU T2300 at 1.66 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 80,286,958,080 [bytes] 74.773 [GB]
  Capacity of the hard drive space free 27,243,552,768 [bytes] 25.373 [GB]
  Video ATI Mobility Radeon X 1600 version = 8.204.0.0

  IDE Device 1 TOSHIBA MK8032GSX
  Interface IDE 2 no
  Version FW IDE Device 3 HL - DT - ST DVDRAM GMA-4082N = HV02
  Interface IDE 4 no
  Interface IDE 5 no
  Interface IDE 6 no

  [Information QFE]
  Windows Update "KB888111WXPSP2".
  Windows Update 'Q147222 '.

  The problem is that I can't open most of the DVD. Some of them were ok before, but lately when I am tring to open just blocks. The light just flashes and nothing happened...

  Can someone help me, please?

  Hello

  It is a never-ending story.
  Many media doesn t work with my drive. I have tested many media from different manufacturers and now I use a some of the TDK media.

  Generally, you will find in the manual the user who must be preinstalled on your laptop a list with compatible and supported CD and DVD.
  These media should work properly and the reader must read and burn without any problem.

  But of course, sometimes a failed drive can be a reason for no reading or no combustion.

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

  Original title: Sony Hanycam HC20

  I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

  using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

  I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

  as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

  There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

  The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
  You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.

• SmartView Essbase connection on the default port, must connect to 6423

  Hi all

  We have Hyperion 11.1.2.2.30x installed and configured with full SSL everywhere.  With this, we have Essbase successfully listening on 6423 (6423 only, we have disabled 1423) safely and all components (planning, EN, Calcmgr, etc.) are in communication with success too.  Thereby when attempting to connect to Essbase via SmartView, we receive an error stating ' unable to communicate to < essbaseservername >:1423.  The issue is that SmartView trying to connect on the default port (1423) instead of the safe harbour 6423.

  In environmental assessment, we have added a provider using the secure connection (< essbaseservername >: 6423: secure) that we are able to use in environmental assessments, but in SmartView is always looking for 1423.  No idea where this becomes SmartView and or how I can get it to connect to 6423?  Thanks in advance for any help you are able to provide.  In addition, all other connections through SmartView (SSL) are able to connect successfully.

  SmartView version 11.1.2.2.310

  Hyperion: all versions 11.1.2.2.30x

  If SSL is enabled by the EMP for Essbase configurator and the value of setting SSL configuration in the essbase.cfg then when you connect to Essbase in Smart View the safe option should be available for example "EssbaseCluster-1: SURE.

  See you soon

  John

  http://John-Goodwin.blogspot.com/