Satellite A100 - freezes if the blue light turns

When the blue light comes on the touchpad turn high freezers.

Also what cause the blue light comes on?

You must give us a few more details.

What Satellite notebook you have exactly?
What operating system do you use?

What blue light do you mean? Is it always or sometimes only?

Tags: Toshiba

Similar Questions

  • Cannot start my Satellite A100 - 1 G - the battery light just flashes

    I have a laptop A100 - 1 G. Indicator of battery showed low and I plugged the power supply for the laptop and he showed the connection was made, later she flashed low battery connect to the power (although it was still connected) and then he would flash his load and then back to low battery, until it ends by died.
    Now it shows even not any light when I plug in the power adapter and start not upward, the battery light blinks just and nothing else.

    Help would be appreciated!

    I think the problem is the battery. Remove the battery from the laptop, connect only leave, adapter / it connected ten minutes and try to restart your laptop.

    Please let us know what happens when you do this.

  • How to turn off the blue lights under the speakers on Satellite P100?

    Does anyone know how to turn off the blue lights that lie beneath the speakers on a Satellite P100? They are evil in my sight!

    Thank you, John.

    Hello

    You are a lucky man. This is a very new unit and I wish that I would also have one of the new Satellite models. But you know, the money is the key :(
    However, I don't think that it is possible to put out these fires.
    In my opinion, it is a part of the design of laptops. It seems very futuristically.

  • How to disable the blue light on Chicony USB 2.0 Camera?

    Hello

    My first post. I have Toshiba laptop with end of Chicony USB 2.0 Camera camera built-in, there a blue light. I put t want this blue light when I open the messenger or ICQ and talking with one my girlfriend. The blue light is turn on and I don t like it.

    How to disable, because it dazzle me
    End thank you cordially

    As far as I know the blue light can t be disabled and it will show if the webcam is used.
    If you use a Messenger you use the webcam too?

    Normally if you write only with one person in the blue Messenger is not light. On my Satellite L300, I also use ICQ, but I don't see the blue light that if I use the webcam.

  • Disable DHCP on WRTU54G behind WRT54G, impossible to get the blue light

    I spent several hours today trying to set up my second router (WRTU54G) behind the first router (WRT54G) with the DHCP offshore on the second router, but blue light don't come. My first router is connected to the modem. There is nothing wrong with the phone service, it works with a LAN WAN Setup on my routers and the blue light comes on. But I'm trying to get everything on my network to answer and turn on sharing, so I'll try the config LAN to LAN on the two routers with DHCP disabled on the second. No blue on light. I also tried the Bridge mode on the second router but that did not work. By browsing these forums, I opened the ports 5060-5061 and 16384-16482 on my first router but I don't know what IP address to assign them. What I'm trying to do is to use my router second, WRTU54G of VOIP, like a switch, but also use it for telephone service. I know that I can just swap the routers and that should work, but y at - it another way?

    Thanks for the reply, but that has not worked for me. But I finally got to work now, after some more googling and play with the settings. I have stuck on the 'Bridge' on the WRTU54G mode but kept the connection between the two routers on LAN to WAN connection. This didn't work at first but after only 20 minutes to leave and the blue light came all my computers are on DHCP IPs the first router too.

  • My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

    My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

    Hi Heyoabc,

    Please resend your message main here.

    Nick-

  • LaserJet 1102W Pro - can't get the blue light at all

    I do the initial installation of a Pro LaserJet 1102W.  I created another without difficulty.  After a reset to the default values and an update of the firmware, I can not even a flashing blue light indicating the necessary wireless configuration.  Tried with and without USB cable.  I get the status lights will blink for 10 seconds and then back to solid green light.  I tell myself that I need the blue light blinks then I can connect via Wi - Fi to set up.

    I believe on this model if you press the wireless to the printer and the (protected web configuration) WPS button our router that they should connect automatically. Then, you can use the installation package and the type of connection appropreiate for the printer on the computer.

    Is there anything else that could help you?

    Happy holidays!

  • Why my new cable Alienware R3 17 don't have the blue light on?

    I received my new alienware R3 17 today, I was informed that new alienware R3 17 of my friend power cable has a blue light on it, why my new alienware R3 17 cable did not have the blue light on? and P.S I also received the Free Bundle of NVIDIA GeForce which comes with the order.

    Not in New Zealand, it is not :-) and the datasheet is not differentiate different graphic specifications, they all have the same power 240W.

    I have 240W supply and a 17R3 of 970M

  • I downloaded LR6 to a new HP Pavilion computer and when I try to change in developing all I get is a blue screen. Photos are .dng when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the re

    I downloaded LR6 to a new computer HP Pavilion. 10 windows and when I try to change in developing all that I get is a blue screen. Photos are .dng but when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the rear section. When in the module library, photography is able to be seen, but as soon as I click on the development, I see a flash of the photo and then the screen is all blue where I would like to see the photo. I opened both the old and the new computer and against each element and they are identical with the exception of the blue screen. I wonder if it has something to do with the magnifying glass?

    Go in Edition > Preferences > Performance and uncheck CPU graph use.

  • Satellite A100 - problem with the operation of the battery

    Hello!

    My laptop (I bought 1.5 years ago) has a big problem when you use with the battery.
    First of all, with a fully charged battery, the notification of "limited battery status" appears after 2 minutes of operation and after 5 minutes, he goes to the standby mode due to the level of the battery is very low.

    Then, I plug it into the AC power and the battery remains yellow for about 15 minutes light and then turns blue.
    (The battery is OK, I tested it on another satellite A100)

    What can be the problem?

    Thanks in advance!

    Maria

    Given that you have tested the battery in another satellite A100, the problem must be in the settings of your computer:

    1 > START > CONTROL PANEL > POWER SELECT THE OPTIONS ICON

    2 > you will now see a screen that shows your management food and note * one * has a tick that is a small point in a circle:

    3 > BALANCED > POWER SAVER > HIGH PERFORMANCE

    4 > THE PLAN OF POWER > CLICK ON CHANGE PLAN SETTINGS > WILL DISPLAY A SCREEN SHOWING YOUR PLAN!

    5 > GO TO > * CLICK * WHERE IT SAYS CHANGE ADVANCED POWER SETTINGS

    6 > IF YOU SCROLL THE BAR TO THE * SIGN + > BATTERY-CLICK * THE * SIGN.

    7 > YOU SHOULD HAVE: you will need to have play with these settings, or you can click on restore plan defaults to see if that will solve your problem

    Notes by clicking on the * + plus SIGN next to tany of these options below will allow you to change what event happens on your computer.

    + CRITICAL BATTERY ACTION

    + LOW BATTERY LEVEL

    + CRITICAL BATTERY LEVEL

    + LOW BATTERY NOTIFICATION

    + BATTERY LOW ACTION

  • Satellite A100 freezes

    Hello world

    Sorry for my English but I'm French. I'll try to do my best to describe my problem.

    I bought Satellite A100 2 months ago.
    After I completed the installation of Vista, I changed the partition of my hard disk, I put a few MB on my my d: C:
    I installed OpenOffice 2.0 and that's it.

    Almost every day my laptop freeze: there is a single reaction, that is when I stopped it by the power button.
    This problem occurs when:
    -I do nothing
    -L' computer goes into sleep mode
    -I'm working on open office
    -J' using IE7

    I did update to Vista (home edition) and the driver for the graphics card is the last of NVIDIA.

    Anyone has the same problem?

    Thanks in advance.
    Sandric

    Hello

    Hmm... not easy to say why the A100 freezes. I think that the application of the 3rd party could is a bad influence on Vista. Also the C partition changed may cause this issue.

    In my opinion, you should retrieve the laptop using the Toshiba Recovery CD.
    Can use and work on the laptop (without installation of 3rd party) to check if the laptop freezes using factory settings!

    If the laptop works properly and without the buttons then the material is not defective and the problems are related to software and simple programs.

    If it is not advisable to install and use these programs. ;)

  • Satellite A100 freeze temporarily

    Anyone had this issue with an A100 freeze temporarily? He does about five to ten times per day.

    Hi George,.

    Could you be a little specific mor are contiguous with the nature of your problem? In particular, the duration of the 'freeze' and if it is accompanied by other symptoms such as busy fan cooling, unexpected hard drive activity, etc. Also get it for laptop since the 'freeze' itself or you have to take steps to erase it?

    Light breaks (usually a few seconds) may occur if a background activity kicks in and requires processor to complete cycles. This can be events such as Windows, looking for product updates from the Microsoft web site, applications, anti-virus updates, e-mail applications checking e-mail etc. servers. Even unexpected applications (such as Nero or Adobe Acrobat) can do audits of regular update which can cause to your laptop pause momentarily.

    It is also useful to check your laptop for malware (use Adaware and Spybot S & D) to ensure that there is nothing present that may trigger this behavior.

    Kind regards

  • Satellite A100 has sometimes unresponsive when you turn it on

    I have a computer laptop Satellite A100, Centrino Duo. Sometimes I have problem when you turn on the laptop. The computer stops responding while it is turned on and when I reboot without disk scan is started which is usual when windows does not start successfully.

    Sometimes the computer starts and I log in the system but then the screen turns white and even when no disk scan is started when I restart the system.

    Pls advise.

    Hello

    In my office, I have the Satellite A100-504 and so far, everything is OK. I didn t notice something similar to described issue. Have you noticed this problem since the first day?

    Can you please tell me what A100 you have exactly? Is - this WXP or Vista preinstalled laptop?

  • Satellite P100-196 is not blue light under speakers

    iI have satellite p100-196 and I saw that this model has speakers light blue but my don't hav lights
    mayby someone I have this problem or know how active this or sth else?

    Hello

    I found information that all cell phones series Satellite P100 with Intel graphic 945GM has been delivered without the blue speaker lights.

    I studied a bit and these books DON T support the lights of the speaker:

    Satellite P100-130; Satellite P100-133; Satellite P100-141
    Satellite P100-142; Satellite P100-146; Satellite P100-151
    Satellite P100-186; Satellite P100-189; Satellite P100-196
    Satellite P100-199; Satellite P100-214; Satellite P100-227
    Satellite P100-229; Satellite P100-230; Satellite P100-233
    Satellite P100-235; Satellite P100-236; Satellite P100-241
    Satellite P100-247; Satellite P100-253; Satellite P100-255
    Satellite P100-256; Satellite P100-257; Satellite P100-258
    Satellite P100-268; Satellite P100-275; Satellite P100-277
    Satellite P100-281; Satellite P100-299; Satellite P100-308
    Satellite P100-309; Satellite P100-312

  • Satellite A100: Language for the Vista issue

    Hey all,.

    I just bought myself a Satellite A100 something something with Vista Home premium.

    When I turned on the computer on windows, it has proved to be the French. That in itself is not surprising, as I live in Belgium, where people speak Dutch and French. "Not a problem," I thought: "this manual is in French, Dutch and English, and therefore all the documentation.

    I'm sure the restore disc has all three languages out there, and I'll simply choose English. Or even the Dutch one for that matter. Anything other than the French! »

    So I start from the restore disc, and, Oh surprise, there are three languages out there: French, Dutch and English. Unfortunately, the computer won't let me choose any language but French because "you have selected French, now, you're stuck with it. (off bugger) ", or something like that.

    Unfortunately, I never selected French: the Distributor, or Toshiba himself has made. Is it possible to bypass this protection, or I'll have to return the laptop and make sure that I do not get a French?

    Thank you

    Menno

    Hello

    One question: has Vista already installed on the laptop when you started the laptop for the first time?
    Usually the Vista operating system there are on the HARD drive, but if you turn on the laptop for the first time, you should get the CONFIGURATION window and you should be able to set all the parameters such as language, country and keyboard by yourself.

    By the way; This is not a bug in recovery CD! As far as I know, you can only choose one language from the recovery CD that supports 3 languages. I guess that this State is saved in the BIOS or elsewhere and you can select only this language which was chosen at the first time.

    In your case I contact the dealer of the new laptop and ask the guy if they or someone else has already installed the OS on this laptop

Maybe you are looking for

  • Shockwave flash

    Hello!I have a problem where the SWF files them won't open in firefox, IE works fine, but not for firefox for some reason which I cannot explain in detail, but I will try with a few photos as aid. https://ImageShack.com/i/exOUUG2vp (Fig 1) If you loo

  • iPod has been detected but cannot be identified correctly-HELP

    So, less than a month ago I bought an iPod nano 7th generation and when I bought it, it was fine and I downloaded all my music on it. Tonight I went to add the music more and I get the following error message - "an iPod has been detected but could no

  • 5781 FlexRIO asymmetric configuration

    Hello I use a PXI system with a 7962R and a f = 5781 FlexRIO system for a control system. E/s differential Setup is pretty simple, but I don't understand exactly how to configure inputs and outputs asymmetrical IO. There are a few details in the manu

  • bad terminator in the Basler A504k CIM series

    I'm talking about in series of LV to a Basler A504k via a NOR-1429th and, despite what says in the compatibility report and in this post, I perfectly managed, at least as long as I tried. A (still unpolished) example of my order that VI is attached (

  • Acer Aspire 7741G

    Hello world So I have an Aspire 7741 G, witch, I got from my father after his death. He always had problems with it, it has overheated, frozen and ran slow, he still had service, but they have failed to solve this. I said that I live in Norway. So af