Satellite A100 has sometimes unresponsive when you turn it on

Similar Questions

• Satellite A300 starts sometimes like when you turn it on

  Hey people,

  So my sisters laptop (satellite A300) was more than heating for basically since we bought it, but now I think that has caused a serious problem.
  Now it does not start at times like when you turn the backlight only market not even turn on.

  Hard drive does nothing basically nothing just the power light comes on it is all.
  But when I remove the charger and close the lid and open it again, wait like 2 minutes it magicly towers, so it's the startup problem.

  This may have something to do with it, but when you plug the cable that the tactile area (above the keyboard) lights up if laptops or disable but don't market not turn on if not plugged Chargers... also touch dosen't work area.

  So many things hope you understand all this, thank you!

  Hello

  I think that this is related to the problem of equipment; Maybe this problem of motherboard or power suply electronics problem.
  But that's just a guess and no one here will be able to say what's going wrong with your laptop until it has been checked by a technician.

  That's why I put t think you could solve this problem, install the new OS or new BIOS.
  I therefore recommend to request a laptop technician help and equipment to check.

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• CAPSLOCK ALWAYS ON... OFF CAPSLOCK HAS SO THAT WHEN YOU PRESS ON... THEN TURNS ON AUTOMATICALLY

  Hello

  CAPSLOCK ALWAYS ON... OFF CAPSLOCK HAS SO THAT WHEN YOU PRESS ON... THEN TURNS ON AUTOMATICALLY

  Hi david,
  I deleted the account and created a new... Problem solved. Thank you for your help...

• Satellite Pro L500 stuck when you turn it on and got the loud noise

  I use Toshiba for a long time, this is my 3rd Toshiba laptop (I bought it in June 2010), today I bought the helmet, when I plugged it in, it did not work. (When I talk with my friend through sky, I use the laptop speaker instead) Then my friend got me to download a driver for the sound.

  After the download, the helmet worked perfectly. BUT the speaker on the laptop did not work. Then I restarted computer again and this time when you turn on, it's stuck. stop boot on Toshiba logo later process, there are peep sound (not speaker, he is very strong), I can hear it from the inside. I can't do anything else, JUST close.

  Please help or advise where can I take my laptop to the service because I think that if people reply to my post and I don't know if I can fix it myself.

  I'm going overseas week next to the presentation and need to use the laptop. Do you think that if I take the laptop to the center of toshiba, they immediately understand problems? I am now using my old toshiba, and it is slow to make any presentation.

  Hey Buddy,

  You use normal headphones with headphone jack or USB?
  Headsets with headphones are usually easier handling in my opinion.

  In any case, at the time where your computer laptop doesn't boot and stuck on Toshiba logo, right?
  In this case, you must remove the battery and the AC adapter at a time and test it again.

  Check this box!

• Stor.e TV + loader error keeps coming up when you turn it on

  I experienced ongoing problems accessing the hard drive. Error message "No Loader" keeps coming up when you turn it on.

  The so-called 'solution' to this problem on this forum is to open the box and play with the cables. While I had some success with this method initially, disassembly of the box 10 times a week is not on.

  In desperation, I tried something else.
  When the message no. Loader is in place, I pass in the box and the new on the remote control.
  After 2 or 3 times, and then the folder of the HARD disk appears generally.

  I did that constantly now with great success. However, this suggests that the error no. Loader is NOT a mechanical connector with the hard drive problem, but (as usual) poor software (what else?).

  Dismantling of the unit is shut down for an extended period of time so may explain why this technique works.

  Put the unit on and off the power several times also solves the problem of file D are not on the network even if Win7 shows shop-TV-Plus as a mapped drive on NTFS (but can not find the file D).

  See the resemblance?

  Another thing that exacerbates the problems is poor ventilation of the device. The first thing that happens with this device, it's rubber feet sticky garbage fall.

  While this may seem trivial, the ventilation slots are under the device and will be blocked if he has no feet. I live in a hot country so this appliance gets very hot and behaves even more erratic, unless it is well ventilated.

  Ideally keep well away from other units and preferably sitting it on a small box in itself with the vents in many exposed.

  I always also have problems to read files FLAC, MKV. The unit sometimes lost synch with files FLAC which generally play OK and crashes or causes a large noise or white noise on the speakers (dangerous).

  Some just MKV files play quite although VLC reads. There are many other inconsistencies, but these are more boring.

  Everyone knows these problems or someone at - it other solutions for these problems?

  I don't think we can expect another software upgrade from Toshiba? Your dreams, pal.

  I m not Stor.E + owner and can not say much about the issues mentioned, but the first sounds of mentioned problem (error no. Loader") for me much more like a hardware problem as a software related issue.

  Files mkv seems to be supported.
  The mkv must be encoded in H.264 and MPEG-4 format
  This is what I found on a Web page.

  In addition, there seems to be an update of the firmware

  [3.5 inches StorE TV + ROM Image 2.12_UI1.0 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Satellite P100 locks when you turn on the WLan switch

  Hello

  My Satellite P100 turns off.
  It would not restart until I turned off the switch wireless lan.

  When it works, if you turn the switch back to a black screen occurs.

  Anyone can shed some light.

  Thank you

  It looks like a hardware problem.

  So in your case, I'd go to an ASP. Technicians can check your laptop and share the material if necessary.

  But before you go to a ASP try a BIOS update. You will find it on the Toshiba site and maybe this will solve your problem.

• Satellite A100 - save the battery when the laptop in a longer retention

  Hi, I have a * Satellite A100 * about 4-5 years. There was no intensive use (it's hospitality do not work) and is in good shape.

  I go there for at least 6 months and will PLAN A - most likely need to put the computer in stock, that is to say. No one will be able to access. PLAN B - there is a very low probability that someone could "baby sit" it but it can't count on him.

  Can anyone suggest what is the best way to deal with the LiOn battery in the above two cases?

  Can I remove or leave in the laptop?

  Is there a way to stop the battery completely dead while in storage / is not not in use?

  Thanks... any advice appreciated.

  Hey Buddy,

  In my opinion it makes no difference if you put the battery 6 months or leave it in the computer. In both cases, the battery must be charged because it also loses power when it s turned.

  If nobody is using the computer you can remove the battery, otherwise and someone would use you can install the battery.

• Satellite Pro A120 - screen flickers when you activate another monitor

  I have a Satellite Pro A120, who has a problem with the computer screen to turn off image poor qulity (looks like interference) when you use the function key and activate a second monitor, but the image on the 2nd monitor is fine. I also discovered that the second monitor doesn't have to be physically connected to the main display having the problem, as soon as you activate the second screen the problem starts. However, as soon as you disable the second monitor, the computer screen looks perfect.

  I updated the BIOS of these two and the graphics driver, but the problem still persists.
  Any ideas?

  Why don't you tell us what portable external that you use?

  Have you tried to put the good resolution of monitor 1 (s notebook LCD) after the switch to the external display? I can imagine LCD becomes bad resolution and it must be changed.

  Please play with all the display settings. I used my cell phone so many times with different external screens and I was always able to configure this works well in any mode offered.

• Satellite U840W-10 t starts when you open the lid

  Hello world.

  I recently bought a U840w-10 t.

  I can solve a problem.
  When I stopped completely win8, I enabled in the BIOS and in the configuration of toshiba software the option this computer do not START with the opening of the SCREEN.

  But even with this option turned off, my laptop STILL BOOT to WINDOWS, simply open up the laptop, NOT by pressing the power button.

  I want to avoid that, because I noticed that when the laptop is on the bag, sometimes it STARTS by itself with a small vibration and milimetter opening of the screen.

  Does anyone have this problem?
  Toshiba is announced on this subject?

  Thanks in advance.

  Have a look here:
  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  + There are two possibilities. A stop of the hybrid were made in Windows 8 (default option) or "Open Panel - Power On" is activated. +

  + If one of these two functions is activated, the notebook starts up automatically when you open the cover of the display. To change it, disable hybrid closing mode or turn off the function "open Panel - Power On. +