Satellite A100 - messages of weird info during the recovery process

Similar Questions

• How instaill of recovery on hard drive during the recovery process

  Installed windows update and then computer wouldn't boot.  I am now HP recovery cd back when, so I put in the disk and part of the recovery process was to save photos etc. and the default was to put the info on the D drive called HP_Recovery.  If I open the D drive just tells me is not to delete the file.
  Do I have to re install the ones raised back files thanks

  You have not indicated what OS you are using but if Windows 7 use this:

  http://support.HP.com/us-en/document/c03056985

• Satellite 5105-S702 Touch ED error during the startup process

  When I start my Satellite 5105 - S702 laptop with the v8.4.0.24 of antivirus from Computer Associates (CA) software is turned on, I get the following at the end of the boot process error message:

  Error affected

  Recovery of the THotkey failed. "
  Part took place - TouchED.exe - (THotkeyFindProc)
  Function failed - FindWindow)
  Error code: 0 x 00031402, 0x00000002

  However, when I disable the CA antivirus software and restart the laptop, I don't get the error message.

  Thus, it would seem that the CA AntiVirus software causes this error message.

  Would be grateful if someone could give advice if they have this problem with this laptop model, or the Satellite 5105-S701, or European equivalent model 5100-603, and how they have rectified it.

  Thank you

  AlanCB

  Hello

  I agree with you.
  In my view the installed (CA) anti-virus software is not fully compatible with the Toshiba Hotkey Utility or the software anti-virus doesn't recognize properly and can not handle.

  CA anti-virus does not for me but maybe you could set some parameters to ignore the Hotkey Utility from Toshiba.

  Maybe it helps if not I recommend you contact Computer Associates support team.

• Satellite A100-549: BSOD after I used the recovery from another PC

  Hello.

  Had a few probs with my laptop and decided to recover it using another pc recovery disc.
  I get the laptop is a Toshiba a100-549. Unfortunately for some reason I can't disks that were originally with her.

  The opertaing system is Windows xp. The disks I got with a Vista.
  It loads OK but goes to a blue screen after 30 seconds and restarts. Is there a reason for this and can I do.

  I think I may need to get your hands on a good drive and load it on again.
  Someone at - it copies of drives for this laptop and able to send me their. I'll gladly pay for them...

  Colin

  Hello

  Don t user recovery drive to another PC, because it won't work.
  You can use a clean Windows OS disk or the Toshiba recovery disc.

  Why? Because the recovery disk contains an image. The image is a package containing a Windows OS, drivers and other software.
  If you want to use the recovery from another PC disk then all the drivers, tools and software distributed for this PC will be loaded on your Toshiba laptop.
  This can cause the BSOD!

  So if you n t have the Toshiba recovery disc then you should use MS Windows CD!
  Toshiba drivers can be downloaded from the Toshiba page!

• Satellite A100 PSAA9A - drivers and applications from the recovery disk

  This laptop was reformated HARD drive and I decided to try Windows 7 (beta), which is currently installed and working well. I would like to install the original drivers and applications from the Toshiba recovery disc but I don't want to reinstal the operating system (XP). Is this possible?

  As far as I know that is not possible because applications from the recovery disk and drivers are for Windows XP and they are not compatible with Windows 7.
  In addition it of not possible to install the only special drivers or applications from the recovery disc.

  You can download all the drivers and tools on the site of Toshiba, but I doubt that it of compatible with Windows 7, but you can try it out and post your result here.
  http://EU.computers.Toshiba-Europe.com

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Satellite A100 - 147 Compression file error with the product recovery disc

  I have Toshiba A100-147, just out of warranty. I tried to recover with a disk, disk unpack to 69% and then I get the message "ERROR READING OF COMPRESSION FILE (1). I have no choice but to click OK in the error message box, and then quit the recovery as she stops running.

  Any help would be extremely welcome.

  Hello

  It looks like a problem with the Toshiba Recovery CD.
  Have you tried to repeat this procedure?

  What of the HARD drive? You format the HARD drive using an original CD of XP MS?
  It s very interesting if a format of HARD drive could allows to perform the installation of the OS since the Toshiba Recovery CD.

  I remember that something like this has happened on my laptop s friend was not able to recover the operating system using the Toshiba CD. Finally, we found that some sectors on the HARD disk has been corrupted. Format drive HARD allowed integer and my friend was able to install the image of Toshiba.
  It's worth a try ;)

  But of course, this error could occur because of the faulty recovery CD.

• 3011G satellite freezes the recovery running during the formatting process

  I work in a computer shop, but I think it's better to try to post here and hope for the best, but to send the computer. I'm working on return to Toshiba as DOA.

  Basically, the problem is, when I run the restoration, the computer crashes during the formatting process to 'Progress' 23-11 minutes from the end.

  Since it is not the first time I have a problem with this particular model, I wonder if someone more clever that I had found a workaround... The operating system is Windows Vista and I use original CD to start the recovery.

  Any help would be appreciated.

  PS Excuse the bad English, I'm typing this with my left toe (figuratively). A lot of work today, huh.

  The Satellite 3011 G is unclear to me. Are you sure you typed the series of laptops good?

  In any case, the installation should generally run smoothly, without any functioning anomaly.
  The HARD drive has been formatted in the wrong way or HARD drive could malfunction.

  So in any first you have to format the HARD drive and remove all partitions on the HARD drive
  I noticed several times as HARD drive partitions a bad may have a negative influence on the installation of the OS since the recovery CD!

• Satellite A300 power suddenly goes out during the race for hours

  Dear users of the Forum,

  I am facing a strange problem in operation.
  My laptop Satellite A300 is suddenly down power during the race for hours.
  It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

  This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

  I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

  Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

  I tried to run only on the power (remove battery) and got the same result.

  can anyone identify the problem? can you please give me the solution?

  smarjit1

  Hello

  I put t think it is s virus.
  En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
  I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

  Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

  What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

• I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  Hey lee,

  Are you still facing this problem?

  Have you tried accessing the service by using the browser: http://cloud.acrobat.com/exportpdf

  Kind regards
  Rahul

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• picture password stopped working, says there is a failure during the registration process please try again tried for 2 days

  picture password stopped working, says there is a failure during the registration process please try again tried for 2 days.  He worked for weeks and then stopped.  I tried to change it and get the same message

  Hello

  You can contact Microsoft on phone, please visit the below mentioned link:

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539
   
   

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?