Satellite A100: Norton error appears - memory could not be read

Similar Questions

• Error: "error btstackserver.exe: 0x0054be37 error, 0x000001ef memory could not be read" before the shutdown.

  Original title: Btstackserver causing error computer turns off.

  It began on 15 September after downloading a video game and starts when you try to run the game, but has since broke outside to play the game, even after I uninstalled it.

  The error message that appears before the judgment reads: "" btstackserver.exe error: 0x0054be37 error 0x000001ef memory could not be read. ""
  My laptop close instantly and is unable to start for a few minutes at least. Once a blue screen occurred on startup asking to allow the troubleshooting begin, that I authorized. There is however, no solution found by the computer. I tried several solutions, including running a system defrag and cleanup and uninstall the game. As part of my laptop gets unusually hot at shutdown, I also inspected the area and cleaned the dust of him in an attempt to eliminate possible physical obstructions.
  My laptop is an Asus N61jq age of two years and I run Windows 7 x 64.
  Any help is greatly appreciated.

  After you perform a clean boot several times, I determined the problem with the Steam client set. I also seek to their site of support for similar problems and followed through the steps of support described in this page: https://support.steampowered.com/kb_article.php?ref=1274-UOHK-5653

  For now, this seems to have fixed the problem, but I'll post here if the problem persists.
  Thank you very much for the help!

• Error 990 - memory could not be read

  At the launch of Flash Professional 8, the following application error is generated as shown in the splash screen are the initialization of fonts:
  
  990: Flash.exe - Application error
  The instruction at "0x6172676f" referenced memory at "0x6172676f". The memory could not be "read".
  Click on OK to terminate the program.
  Click on Cancel to debug the program.
  [OK] [Cancel]
  
  With each uninstalling and reinstalling Flash numbers change error and the memory location address.
  
  Everyone knows this error and have a solution? Reinstall & reboot has not solved.

  I had a similar problem with Flash MX 2004, and it turns out be related to a problem in Quick Time. (I was also unable to play all QuickTime files, then you want to check that your side to troubleshoot your cause as well).

  QT has been so damaged on my system, I could not even uninstall it using the normal methods. Our IT Department had to manually delete everything on my system related to Quick time. After that, I have uninstalled/reinstalled Flash and reinstalled QuickTime, and everything has been fine since. (In fact, I've upgraded to v8 since then...)

  Initially I thought that my problem was a police corrupt, since it is in the part "load fonts" from the start, but Sir that fixed the issue of the prothrombin time. I have worked with the technical support of Macromedia (at the time), but cannot find the e-mail thread.

  UPDATE:

  I found the former topic, here are the relevant message of Support from Macromedia, which has led to the resolution:

  ««I'm sorry to hear that you are still having the same problem, I have been evaluating the said forum thread and I think I remember something on the issue of Player QuickTime.»» For some reason, old or broken in QuickTime can also cause Flash malfunction as the Flash needs for some operations.

  I recommend that you download the latest QuickTime, uninstall your current version, restart and install the new QuickTime Player, then uninstall and reinstall Flash using the same routine I provided earlier."

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• Error - the instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read". Computer Windows XP freezes when online.

  Original title: svchost.exe - Application error.

  When I'm online I get the error message appear as follows:

  Svchost.exe - Application error

  The instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read".

  Then my computer freezes

  Don't know what triggered it on my machine, I do not use 'messenger' , but I discovered that it was something to do with Windows. I have a Toshiba laptop, I finally ran the process of "adding value to products" using their 'product recovery disk '.  It took hours to reload everything and download the updates after the hard drive has been re-configured, but it seems to have solved the problems that I had with.  Radical solution, I know, but I'm not a "geek" so was becoming more frustrated with the constant "freezes" and poor performance.  I can only assume that my Windows XP system had somehow been corrupted.  It's all working fine now, fingers crossed!

• BTStackServer.exe - Application error, the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read

  Sometimes my computer will display a "BTStackServer.exe - Application error' window that reads:"the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read. When this error POPs, within seconds the computer just turned off completely and I have to turn it back on. As a first step, it rarely happened, but now it will be pop up and stop a little less than 5 minutes to restart the computer. I have a Lenovo x 201 running Windows 7 PRO, and two sticks of 4 G of ram. I tried reversing the two RAM sticks from one location to the other, but that has no effect. Would it still a problem with the RAM sticks? I have the latest version of Norton Security and it shows no virus. If anyone has any ideas, what could be the cause of this it would be appreciated.

  Hello Kevin,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your time.

  Before reinstalling Windows, I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us updated.

  Thank you

• Why do I get the jqsnotify.exe - Application Error Application error. The memory could not be read?

  Why I get this error message every time I opened Firefox saying: jqsnotify.exe - request error and then at the end of the line, he says: the instruction at '0x5ff3d322' referenced meory to '0xe41203c3 '. The memory could not be "read". Click on OK to terminate the program.

  This has happened

  Each time Firefox opened

  == I recently renewed and installed CA Security Suite and Firefox uninstalled and reinstalled again.

  http://www.java.com/en/download/help/quickstarter.xml - what is Java Quick Starter (JQS)? What is the advantage of running JQS? -6.0

  Disable Java Quick Start extension: Tools > Addons > Extensions
  Control Panel > Java > Advanced tab > various > Java Quick Starter (disable)

• Application error memory could not be read 0 x 00000014

  Hello world

  I would like to know if any of you have experienced this problem.

  I run an application built by me in a computer with LabVIEW Run-time 9 in which I display a PDF file using an ActiveX control:

  

  The target computer is running Adobe Reader 9.0.  Everything works perfectly until the application is closed.  From time to time (almost most of the time), I have the following error in windows:

  «Application error: the instruction at "0x0ffd609c" referenced memory at "0 x 00000014".»  The memory could not be "read".  Click OK to complete the program."

  Try to find the reason why, I found a few forums who say that the reason is a bug in Adobe 9.0 (in fact, I tried to run the application with Adobe Reader 8 and I can't make the same mistake).  Someone of you have had this error before and found a solution?  These links were not on LabVIEW and I have no idea how to get around this problem.

  Any help is happy.

  Thanks in advance.

  Dani

  Who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.

  It seems that, somehow, LabVIEW and other programming tools, hang around with this version of Adobe (I guess it is because of this bug) when the reference to closing Adobe created by the ActiveX container.  That the solution will be closing "by hand" this reference, then saying Windows to release the whole relationship between the application (LabVIEW for us) and Adobe.  The idea is that when we did with VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:

  -process all Windows messages currently in the queue of messages (.NET: System.Windows.Form.Application-> DoEvents)
  -run CoFreeUnusedLibraries in "ole32.dll".

  

  I hope this information can help someone, I lost too much time to understand this (eventually find the answer in an Adobe forum!)

  P.S. P.S. for those who program in c#, check out this link; He was my source.

• Error message: "the instruction at oxo656edab referenced memory at oxo6d20e8. The memory could not be read', play Pogo games.

  Original title: Pogo games

  I'm playing a game on pogo and when I try to activate a games, this warning comes up and won't let me play a game.  The warning States the following, "the instruction at oxo656edab referenced memory at oxo6d20e8.  The memory could not be read.   Help!  What should I do

  Hello Barb,

  1. you are trying to play games online?

  2 are you facing this problem when you play Pogo games?

  3. what web browser do you use?

  If you use Internet Explorer, then try the work around described in the following article:

  You may receive an error "memory could not be read" message when you click certain Web site links in Internet Explorer 6

  You can also read the following article and check if it helps.

  Internet Explorer is slow? 5 things to try

• ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read".

  Message MSVidCtl broadcast system receiver: ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read". This error will not go away and I can not disable or delete the file. How can I stop it?

  Hi SteveGHowe,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to disable and re-enable the Media Center service and check:
   
  a. Click Start. Click run.
  b. type: services.msc and press ENTER.
  c. find Service Media Center Receiver.
  d. right-click on the service and click on stop.
  e. restart the computer and follow the same steps of 'a' by 'c '.
  f. now right-click on the service and click Start.
   
  Also, try the steps listed in the following link:
   
  Troubleshooting steps I use for Media Center component registration failure error

• Message error "memory could not be Read.

  I am running windows XP SP3, and whenever I play the multiplayer mode of the game (battlefield bad company 2), it crashes with the error: «the instruction at 0x0116df37 referenced memory at 0x0000000b0.» Memory could not be read. »
  Can someone help me with this problem? Essentially, it makes my game without value. :(
  Oh, and the guys over at support of the environmental assessment have been next to no help.

  I would also add that the single player mode for this game has worked smoothly, without any error.

  Hi MacRoss_14,

  ·         Have you had this problem with the game earlier?

  Method 1: Check to see if there are patches available for the game. Log on to the Web site of the manufacturer for the same thing.

  Method 2: Try to uninstall and then reinstall the game and check if this may help.

  In addition, you can check

  http://Forum.EA.com/eaforum/posts/list/660/380660.page

• Error "StartRep.exe education for 0xfc1fceb4 application error memory references 0 x 00080000 memory could not be read.

  Original title: New RAM

  I tried to update my 16 GB RAM in a Dell Studio XPS. The computer except the RAM, but Windows 7 wouldn't start. I got the failure message is "StartRep.exe application error.

  The statement to be made 0xfc1fceb4 reference memory at 0 x 00080000.

  Memory could not be read. »

  Is there any solution for this? RAM cards I have installed designated, they were compatible Windows 7 and are right for my machine.

  After several attempts, I took my machine to get fixed. The problem with all the errors I had were 2 of the new ram sticks were bad. I had to replace them, and now all is good. Thanks for your help.

• error on google chrome: "the internet in memory of 0x635835f referenced by 0 x 00000029. the memory could not be read. »

  Original title:

  error on google chrome

  I get a box that says: "the internet in memory of 0x635835f referenced by 0 x 00000029. the memory could not be read. "what should I do

  Hello

  1. when exactly you get the error message? When you play the game online using Google chrome?

  2. are you having similar problem when using Internet Explorer?

  If the problem is with Google chrome then I suggest that you contact Google chrome support.

  http://www.Google.com/support/chrome/bin/request.py?contact_type=contact _

  Provide us with more information about the issue so that we can better help you.

  Let us know if it helps!

• isqlplussvc.exe memory could not be read error

  I get an error "isqlplussvc.exe memory could not be read error" at windows xp startup which is very confusing!
  
  If I remove the file:
  C:\oracle\product\10.2.0\client_2
  
  The error disappears by all my holiday of ODBC connections.
  
  If I put the rear backrest, returns the error...
  
  Advice greatly appreciated!
  
  (And some explanations about why there is a client_1 folder as a folder client_2!)
  
  Thank you!!

  It is you need or use iSQLPlus? Or you simply annoyed by the message. You can disable the startup automatic iSQLPLUS during OS reboot in the Panel--> Services. If you need to use iSQLPlus then try to fix it. But iSQLplus must be running on your server not your customer.

  You had client2 and client1 is because you installed Oracle client twice at any given time. Check your connection ODBC see what ORACLE_HOME they use. If you only need one, uninstall one of the Oracle client.

• App error: instruction at 0x7c911389 referenced memory at 0 x 00000010 memory could not be read.

  Desktop HP Pavilion (a710n) keeps making the message: the instruction at 0x7c911389 referenced memory at 0x00000010. Memory could not be 'read' click ok to terminate the program - every time that the computer shuts down and many other random times. It prevents downloads to install now?

  Windows 8 is different from its predecessors.  This site contains tutorials for several new features for Windows 8. Once I adjusted to the differences in Windows 8, I found that I enjoyed the operating system.  Keep in mind that the Windows 8.1 is available in beta form if you want to see what can come from the changes.  If you choose to test Windows 8.1, don't forget to do your first recovery disks, then you can return to a factory State if you do not like Windows 8.1.  More information on Windows 8.1 overview can be found here.