Satellite A100 (PSAA2E) - no sound after installing Windows XP

Similar Questions

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Satellite P35-S6112 - no sound after installing Windows 7

  I installed Windows 7 on this Satellite P35-S6112 with its Realtek AC97 inside card. The card and the drivers work, but there is no volume. I can hear the sound with a very light helmet. I have uninstalled, reinstalled, attempt to update, but I installed current drivers.

  Troubleshooting has been done and the system reports no problems. I am in desperate need of help here, as my daughter he needs for his college as his other laptop is in the shop. Any help is greatly appreciated!

  Hi precisiononthe8,

  > but there is no volume
  That means you don t have the speaker icon in the toolbar to change the volume? Well, maybe that icon is just disabled and you will have to enable it.

  Right click on the taskbar > properties > taskbar > customize > toggle system icons > Volume. Set this to on speaker icon will be visible right now and you can change the volume.

  Check this box!

• Satellite A100-495 - black screen after installing Windows XP Home edition recovery

  After the recovery and download of updates and the XP operating system that the screen remains black, bios does not start, and XP does not start.

  What can I do?
  A I press a certain key combination?
  How can I reset the laptop again?

  Who can help quickly?

  Hello Ralf

  Stand by. If I understand you just your laptop does not work.

  What happen exactly when you press the power button / stop? You don't see anything on the screen? You see Toshiba welcome screen.
  Power is ON?
  Is there a any reaction?

  Remove the battery and leave the laptop for some time, connect the power supply only and try to start it again.
  To be honest, this whole thing is strange. Recovery image installation is not responsible for this kind of behavior. Have you done something else that may be responsible for this?

• No sound after installing windows on my hp 620 help 8

  No sound after installing windows on my hp 620 help 8

  I can't find your audio driver on the HP support page, but I was able to locate it, which is the same engine as yours, just the latest version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.

  http://goo.GL/0IMBd

• Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

  Hello

  I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
  I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.

  After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
  I can't boot the CD of form (I can't select same drive to start by pressing F12)

  It just hangs.

  When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.

  I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.

  HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).

  You have no idea where could be the problem?
  Should I format hard drive in a different way?

  BR,

  hosss

  Hello

  Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.

  A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.

  Good bye

• No sound after installing windows 7 ultimate.

  I bought a new HARD drive, installed windows 7 ultimate, there is no sound after installing windows7 ultimate.

  When I attach my old HARD drive, windows XP, I get the sound.

  Device Manager shows no error.

  Pls correct me or direct me to over come this problem

  email * address email is removed from the privacy *

  Thank you

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .

• No sound after installing Windows 7 on Satellite Pro U200

  Hello

  I just installed Windows 7 Professional on my Satellite Pro U200 10 p.

  Available for XP Pro.

  Sound has stopped working since the new facility (which fromatting the drive - no partition) and can not find a solution. The v6.10.1.6000 of SoundMAX Integrated Digittal HD Audio Driver is installed. I uninstalled and reinstalled several times, but this doesn't seem to be the right driver. I can't find info to tell me what the correct driver can be either. The Toshiba site is a little sparse on Windows 7 drivers for this model and gives no indication that the driver may be is.

  Windows 7 does not think that there is a problem and some reports that "this device works properly." in speaker properties > Configuration information dialog box. However not coming out, the speakers or the 3.5 mm jack

  Anyone got any ideas?

  Thank you

  James

  Hello

  Go to Device Manager and check what sound chip you have exactly:

  Use this statement:
  [How to identify an unknown device? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Then you should be able to find a good pilot.
  I also recommend remove/delete the sound card in Device Manager.
  Just select the audio remove card and press on, and then restart the laptop

  PS: Are you sure that the sound is not muted? Please check this too!

• Satellite U300 - no sound after installing Windows XP Home edition

  First of all sorry for my bad English; P
  I installed Windows XP Pro on my computer and all the drivers with installation instructions, but I have no sound, there is no audio device. I downloaded the drivers from the Toshiba site and the Realtek site. Both do not work.

  Thank you.

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99567 please

  There is some discussion on the similar problem. Maybe it will help you with your Satellite U300.

  Bye and good luck!

• Satellite A200 - 20 H - no sound after installing Windows 7

  Hey guys.

  I just bought this computer from a buddy and I decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play sounds. There is not its what so ever on the laptop, all cursors are at max, I tried to push any difference of Pentecost FN + ESC. I tried to reinstall and update sound card driver, lucky either.
  I found a "soloution" who said that I should install value added package, and then run an application, which should reactivate the PC, no luck there either...

  So I start running out of ideas?

  So I am hopeing you smart guys here has a soloution.
  If you need any information from the computer, just ask for them and I will answer you whit them as soon as possible.

  Many thanks in advance

  Kim Jensen

  Hi Chillos,

  If you read this article, you can download a tool to turn the sound back on:
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  If it doesn t work it would be interesting to know if you can hear the sound from the external speakers or headphones for example.
  Check this box!

• Satellite U300-14Z - no sound after installing WIn7

  Hello!
  I have the problem (series Satellite PSU30E) next: laptop computer was Windows XP, who suddenly "fallen" and again once it has not issued (as explained by problem SATA drivers). I installed Windows 7 64 bit, but after installing it turned out that the * Device Manager has no audio device *. I reinstalled the system, is now a Windows7 Ultimate x 86 license.

  All options work, but the sound did not always appear. Installing the drivers doesn't help - * OS still does not see a sound card *. What could be the tools to solve the problem?

  Hi whooz,.

  Is that what you have already installed the audio driver from Toshiba Web site? As far as I know Satellite U300 supports Windows 7 32 bit then an audio driver should be listed and works because readers are pre-tested by Toshiba.

  But it is also important that you install the chipset driver and should be installed first. So start with installing the audio driver.

  Also, try to load the default settings in the BIOS.

• Satellite A100 (PSAANE) - BSOD if I install Windows XP

  I am the owner of the laptop listed in the title (* Toshiba Satellite A100 PSAANE). *
  Inittialy that the laptop was sold with Win Vista preinstaled as operated system.
  My intention is to install Win XP on this computer. I am an experienced user in installing XP on computers but not on the laptop, and this is the first time when I tried.

  I have a big problem:

  immediately after the restart on the bootable CD with XP SP1, I received the following message on a blue screen:

  + "A problem has been detected and Windows has shut down to prevent damage to your computer. +

  + If this is the first time you've seen this Stop error screen, restart your computer. If this screen appeears again, follow these steps: +.

  + Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer to update the driver. Try changing video cards. +

  + Check with your hardware vendor for updates to the bios. Disable the Bios memory options such as implementing caching or shading. If you need to use the Safe Mode to remove or disabled components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe mode. +
  + Technical information +.
  + * STOP: 0X0000007E (0XC0000005, 0XF76450BF, 0XF7A91208, 0XF7A90F08) +.
  + * pci.sys - address F76450BF base at F763E000, DAteStamp 3b7d855c ' + '.

  You should know that I have the latest version of the bios update on this machine.
  WHAT CAN I DO? ANY HELP?

  Hello

  As far as I know the Satellite A100 is equipped with a SATA HDD and so you need the SATA drivers before installing Windows XP.

  It is a known issue and you will find hundreds of discussions here in the forum about this Yes, you can take a few minutes to use the forum search.

  On your laptop, you need the Storage Manager you can download from the Toshiba site. Then, you can create a new installation with nLite disk or you are using an external floppy drive. I think that this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  But don t forget the Windows XP disk must contain at least SP2!

  Welcome them

• No sound after installing windows 10

  I installed Windows on a PC with windows 8.1 10 and now no sound.  I have to download new drivers?  ?????  Thanks for your help.

  Hello

  This could be one of a few different issues. First, we will check your drivers.

  • Open Start, type Device Managerand select it in the list of results. Under sound, video and game controllers, select your sound card, open it, click the driver tab and select Update driver. If Windows can't find a new driver, search for one on the device manufacturer's Web site and follow their instructions.

  • If these steps do not work, try to uninstall your sound driver: open the Device Manager, right click (or press and hold) the audio driver, and then click Uninstall. Restart your device and Windows will try to reinstall the driver.

  • If this does not work, try using the generic audio driver supplied with Windows. Here's how: in the Device Manager, right click (or tap and hold) your audio driver > Update driver software... > Browse my computer for driver software > Let me pick from a list of drivers for devices on my computer, select the Device high definition Audio, select Nextand follow the instructions to install it.

  If you're still having problems after trying these methods, we will try to run the audio Troubleshooter.

  Keep me posted on your results!

• HP d530: no sound after installing windows 7

  Help, please:

  My HP d530 sff (DG058A) no sound after that I installed windows 7, I think it is an ADI SoundMax AC97 Integrated Digital Audio Driver. Can you please link me to the driver audio latset.

  Concerning

  Hello:

  You should be able to use the driver Vista support page of your PC.  Install and reboot the PC.

  This package contains the audio driver for the ADI AC97 Digital Audio Controller integrated in the supported desktop models and operating systems. -Provides the initial version of the drivers for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp36501-37000/sp36530.exe