Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

Similar Questions

• Re-installing Linksys Connect on mobile after the new hard drive installed

  I have a router E4200 and had loaded on my laptop Connect. My hard drive crashed and needs replacement. I have had no problem signing on my WiFi once I got the new installed hard drive.

  With the new hard drive, I now do not have Linksys Connect installed on my laptop. My question is: can I re - install connection with the router works perfectly good or re-setup Connect with the router already up and running will cause me problems?

  Thanks for any help.

  Here is an article on the configuration of the software once the router has already been put in place.

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&app=VW&VW=1&login=1&JSON=1&docid=90fabd0b3674497489d42...

• Satellite Pro A120 - Jerky empty reading after installing new HARD drive

  Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive.

  A I had a problem of driver somewhere? I think it's the 945 chipset.

  Hey Buddy,

  To be honest, it's really hard for us, users, to say what causes this problem and I think you should test more yourself

  Anyway, you have reinstalled Windows using the Toshiba Recovery disk?
  You should also check if all Windows updates are installed and if you have yellow exclamation points in Device Manager.
  For any use of video and multimedia substance High Performance plan wrote BobRock_1.

  Sorry, but I think that it s all we can say :(

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• Re: Satellite C855 - installation of operating system on new HARD drive

  Hello everyone

  My son c855 SATELLITE are collected next week for the replacement of the hard disk to be mounted under warranty; does anyone know if the Windows operating system installed on the new HD?

  Of course you can do it. I just hope that you have created a recovery media.
  If Yes this recovery disc to install the original recovery image on the new HARD drive.

• Re: Satellite U400-11 q with Vista has new HARD drive but no recovery disk

  Hello

  Before starting a very important message: I do not usually work with pc... :-) At my work we have an IT Department for our PC :-))

  However, now I have to work privately with a PC / laptop and I need help: I'm sitting in front of a Toshiba Satellite U400-11 q with a HARD drive completely newly formatted and unfortunately WITHOUT recovery CD or DVD!

  So far I managed to format the new HARD drive and put a Windows Vista Home Basic (OEM software) from my old pc on this notebook. However, nothing works again (I want to get into the Internet, etc.).

  So, I now have to put on all the involved drivers as well as drivers TOSHIBA original, right?

  How can I do this? What drivers to I need? Do I have to download all the drivers concerned (total 113) one by one on the Web from Toshiba site?

  ANY help is appreciated as I see myself spend all night in front of the PC...

  Thank you
  M

  For the benefit of mobile work, you need to install all the necessary drivers and tools and utilities.
  Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Any substance must be installed according to installation order. Here it is:
  Windows Vista SP1
  Chipset Intel module
  Intel Robson (Intel iMSM Driver)
  Intel Crestline-GM / UMA Driver
  or
  AMD M82XT /M86 driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Conexant Modem driver
  Wireless LAN driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  CIR Port driver
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA SD Memory utilities
  AuthenTec AES1610 fingerprint utility
  TOSHIBA ConfigFree
  TOSHIBA Assist
  TOSHIBA Speech System
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA face recognition
  TOSHIBA TRS driver
  Broadcom V2.14.4.0
  HDMI Control Manager
  ProtonPack for Vista

  Install all the stuff on this list. If there is something missing just continue with the next.

  By the way: this machine works perfectly with Win7 32-bit so I highly recommend you to use Win7 instead of Vista.

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• Satellite L305D-S5881 does not recognize the new HARD drive

  Ok. I've had this laptop for a while now.
  It crashed recently. So, I tried to start it up.
  I got "Winload.exe missing or damaged".

  Fortunately, I found an answer to this!
  I got the Vista installation disc and inserted.
  I had this "PAGE_ERROR_IN_NONPAGED_AREA". I fixed too. Stick of 1 GB of RAM to my computer was bad.

  So I replaced it. And during the installation, it hangs. And beeps and undesirable.
  So I thought it was my hard drive. I have a new. (http://www.toshibadirect.com/td/b2c/adet.to?poid=431567 please TAKE a LOOK BEFORE RESPONDING).

  I (try) to install and it does nothing.
  I turn it on and it goes to this page with as my enthernet info. Then I go into the BIOS and it appears. I think I could install it wrong.

  Any help?

  Hello

  I think that the new HARD drive is not recognized, because you have not installed the SATA drivers!
  The new mobile phones support the new SATA controller and especially the drivers are not included in the Windows operating system.

  So, you must first include the SATA drivers before install you the operating system.
  AFAIK the L305D supports an AMD and ATI chipset and SATA drivers must be placed in the ATI graphics driver package.

  On the other hand, you could install the operating system without the use of SATA drivers.
  I think that the BIOS must contain the SATA mode option. Usually it s set to AHCI. Pass this option in compatibility mode and you should be able to install the operating system.

  Cheers mate

• No input signal after installing new hard drive

  SUP guys, im need help, my hard drive on my computer has stopped working, I'd get an important flasher hits and it looks like it please insert a disk and when I did a diagnosis, I had hard drive errors I went and bought a new one.

  In order to take the old one out I had to remove the cables from the hard drive, the big white thing that plugs into the motherboard, the processor fan and cable.

  I put in new hard drive, put everything back as it should and when I boot it all im getting are no signal input on my screen, I have tried on 3 different screens and got the same thing.

  Here are some pictures of the inside of my computer:

  

  

  

  If you notice the VGA thing on the 2nd picture, should no more added to it? I mean in addition to plug the cable from the monitor, I have the impression that there should be something added to the back of it, I just noticed now, the computer and the screen worked perfectly before.

  It's a HP model number is a6655f, it came with vista, but after putting in the new HD, I intend to put windows 7, I have a copy of it.

  I guess with the new hard drive and I am I was right assuming that you have already installed windows 7

  Sounds like you need drivers for the drive, and sounds like a simple problem, download drivers and install I believe that when you install windows 7, it offers you the possibility of drivers installed.

  Oh and you could try to change SATA to IDE in the BIOS and see if that helps

• After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

  After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

  Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

  See you soon,.
  Jerry

• Problems opening Captivate 7 for Mac after installing new hard drive

  Hello!

  My HDD recently crashed and I need to install a new hard drive (OS x El Capitan, version 10.11.13) on my mac. They re-installed Adobe Captivate (I use Adobe Captivate 7 for Mac), but now the software and files that I created using the software will not open. Initially, I received an error message stating that I had to install a new version of Java, but even after I did it, it will still not open. I click on the link in the finder and it bounces on the taskbar at the bottom for one second, then disappears. I tried to restart the computer, but it does not help.

  Can anyone help? I need it immediately for work!

  Thank you, Ashley

  I suspect that the reason is the operating system. Even the Captivate 8 was not compatible with El Capitan, I doubt that is the case with CP7. Only CP9 is compatible with El Capitan.

• Portege 3500: OS crashes after the new HARD drive update

  I have a problem with the new hard drive - Seagate Momentus 100 GB 7200 rpm, ATA - and...
  instalator blue screen starts normally (from recovery CD or OEM CD) and when partitioning is startis - system is stopped...

  HARD drive is ok - tested on another laptop
  Laptop is ok? instalator and works windows, tested on 2 HDD (40 and 60 GB, two IBM)

  It is possible, that this new hard drive is not compatybille with this laptop?

  Please help, because it's my boss laptop :(

  P.S. - sorry for peut English

  Hello

  Are you sure that the HARD drive is recognized correctly in the BIOS?
  Seems that the laptop does not support the new drive (100 GB, 7200 RPM).

  Perhaps because of the large size of HARD drive and the fast rotation value.
  I would try to use a 60GB 5400 RPM a 80 GB HARD drive maybe works but it seems that the 100 GB HARD drive is not compatible

• recovery after installing new hard drive

  The recovery disc will reset windows on a new hard drive with the key at the back of the pc

  Yes.

• No sound after installing new hard drive

  I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

  When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

  I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

  Any help or advice would be appreciated!

  There could be a possibility that you may still need to download additional software.

   

  Perhaps, your motherboard has audio drivers available at their homesite or perhaps your sound card as well.

   

  However, if you have a brand system / pc, and then click on his homesite and look for the model number for the available downloads and updates.

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

   

   

  "stefff05" wrote in message news: 5eb879d3-2646-4a25-8e81-286abb719b2e...

  I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

  When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

  I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

  Any help or advice would be appreciated!

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Problems of new messages after the new hard drive installed.

  Just had to have a new hard drive, motherboard, and installed video card. Used to be I could click the "e-mail" on my desk and my new email would open automatically when the Windows Mail open. Now, I can't my new e-mail unless I have manually click on the send/receive button. I have the parameters monitored to check for new messages every 5 minutes. What am I doing wrong now?

  Thanks for any help!

  Yes, I use Vista, funny... it's windown help that popped up for me! Sorry!

  It is ok. For most wanted if sure we had dealing with. This is the forum for Vista for the future.

  Vista implemented network, electronic mail and to get online
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Tools | Options | In general. East: send and receive at startup checked? Also try to set it to 6 or 4 minutes. Send yourself a test message and immediately close WinMail. Wait a minute, then open a WinMail. A little luck?

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA