Satellite A100 PSAA9A: Cannot use fingerprint & keys Fn after the new installation of Vista

Similar Questions

• Satellite L40 - Wlan issue after the new installation of Vista

  Hello
  I have Toshiba Satellite L40 and I lost the recovery disk. So I download the drivers from the Toshiba website and install them. I have a new installation of windows Vista Home premium Edition SP1 also. But Atheros Wireless did not work properly. There a lock button icon status change not always off and the light is always too. But on the screen top left icon that shows the field of wireless connection there.

  Should I install any other updates vista? or am missing some other facility?

  Thanks for this short notice!

• Satellite A200-10W: cannot use shortcut keys Fn after installing XP

  I installed the XP drivers a new? Control, drivers, Hotkey Utility, but problem is staying. I can't? t use these keyboard shortcuts. Any ideas?

  Hello

  Satellite A200-10W belongs to the PSAEC series.
  Are you sure you used the right drivers for the A200 series right?

  In addition, I would recommend installing all the drivers available XP and tools on Toshiba as Chip Set Utility or hardware configuration page

  See you soon

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• Satellite A100-PSAA9E - FN + F4 does not not for the hibernation

  Satellite A100-PSAA9E

  I installed Windows XP pro and that you have installed all the drivers.
  I installed the controller driver and the driver Toshiba Hotkey.
  I don't have to put my laptop into hibernation

  Someone knows how to fix this?

  Could you please after how do solve you this problem?
  It would be interesting to know.

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• Re: After upgrade on Satellite A100 BIOS cannot use keyboard more

  Need help... after bios upgrade for Toshiba Satellite A100 my keyboard error... now I can't use my keyboard...
  If I used the external keyboard, as there not enough power into the USB...
  Now, how come back to start bios version...

  Thank you or any medium

  Hello

  Enter the BIOS (by pressing F2 at startup) and try to check in the Bios if compatible keyboard, legacy usb support (something like that) is enabled. It should help.
  Otherwise, playing with the up/downgrade Bios (especially, demote) instead of keyboard problem, can cause the crash of the complete system with white screen.

• Satellite 2450 S203: cannot use "easy keys".

  Hello
  There are four buttons in the front part of my laptop for easy to use CD/DVD/MP3 (with the laptop closed), the so-called 'easy touches... "
  Anyone know how I can turn them on? I can't use them.

  Thank you
  LaSa

  Hello Mara,

  the easy keys are activated by software that control of Toshiba. You can download from http://eu.computers.toshiba-europe.com
  Go to Support & downloads and then to the support home page. You could choose your laptop and settings. Then you can download Toshiba controls.

  If you have it installed, go to the Start Menu and Toshiba Console. In the Console, you have an icon called Toshiba buttons. There you can set the properties of your easy keys.

  Tip: You can install all the utilities toshiba, those that make the job easier! ;-)

  Hans Bye

• Satellite A100 (PSAA9E) - Cannot install the display driver for Windows 7

  I have a problem with installing official Toshiba Windows 7 x 32 ATI x 1600 driver.

  After unpacking it should run install.exe, I think, but it's not; nothing happens. Go on the Setup.exe with installation manual, then I see no Catalyst Control Center & Display Driver from the list, just the catalyst install Manager & vcredist. After installing these components (CCC & DD) are not present.

  Any ideas?

  P.S. Same problem with the official driver of Toshiba Vista32 ATI x 1600.

  Hi mate,

  You have already installed other drivers for the laptop? I mean the chipset driver, this driver must be installed first.
  And are you sure that you have ATI display driver? Some Satellite A100 models were shipped with the nVidia graphics card, AFAIK.

  Moreover, what happens if you install driver manual in device via advanced installation manager?

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Satellite A300: Vista 64 bits after the new installation by using the recovery disk

  I have a Toshiba Satellite A300 A300 / M00 and when I got it, it had Windows Vista Home Premium 32 Bit. But after awhile, I started to have problems so I decided to reinstall Vista on my laptop. After crossing with the product recovery media, my system become so 64-bit.

  Was not my system suppose to have 32-bit when it was originally with her?
  If no, then how can I install 32 bit once more on my laptop like 64-bit gives me problems with the installation of some of my programs.

  If I need to buy a copy of Vista 32 Bit, where can I find the drivers for my system, because the product recovery media has all the drivers on this subject.

  Thank you for your time.

  Hmm. Your ad is a little confusing.

  Why would you say that Toshiba Recovery disk contains a version of Vista 64-bit?
  How did you check that?
  From my experience, the Toshiba recovery disc still contains the preinstalled operating system.

  Also as much as I know the new notebook from Toshiba are not delivered with the recovery disk, but with a HARD drive recovery option.
  This option allows you to reinstall the OS from the second partition of HARD drive recovery.
  Alternatively, you can use the preinstalled Toshiba recovery disc creator software to create the own recovery DVDs! And this recovery disk contains the same preinstalled OS!

  Good bye