Satellite A100 (PSAAR) ID_ERR_NOTINSTALLTVALZ_MESSAGE to the VAP configuration

Hello

I have Toshiba Satellite A100 (PSAAR) and the installation of VAP (value added Package) of the site Web of Support from Toshiba, I get error ID_ERR_NOTINSTALLTVALZ_MESSAGE and then the installation ends.

The proposed solution is to do a BIOS update, and it did not work for me, as I said in the topic (I've updated with bios-20071126124517, which is the package recommended for my laptop model). I use Vista 64 bit in the way, and I try to install VAP to eliminate the unknown hit-and-run driver (TOS1901 if I'm not mistaken) in Device Manager. I worked on this problem for a few days now and I'm really tired, so I need your help as soon as possible.

Thanks in advance...

> I'm using 64-bit Vista by the way
Have you tried to install the VAP 32 bit on 64 bit Vista?

If Yes, then I m afraid it won't work, and I guess this is the reason why this error message appears during the installation procedure

Tags: Toshiba

Similar Questions

  • Satellite A100 PSAARE: Toshiba Power Saver + graphics card noise

    Hello

    Is there another URL where I can get a version update of Toshiba Power Saver for my computer drivers laptop Satellite A100 PSAARE other than the home page?

    It seems that it is not determinative of CPU fan (he always keep at maximum speed).

    Also, I noticed the graphics (GeForce 7600) too loud.

    If the monitor is off I can't hear it (just the CPU fan), but as soon as I started working it is audible and as a continuous beep kid.

    Is there a (software/hardware) fix for this?

    Kind regards.

    Hello

    The European driver of Toshiba page is one place where you can get the drivers and tools for your European Satellite A100 PSAARE model.
    This time it s a v7.03.07.I Power Saver for Windows Vista!

    But I must say that I see no problem of software on your laptop.
    Cooling modules and fans have to run with higher performance to make sure that your hardware components may be cooled properly.

    Maybe a cooling module cleaning might help to improve the internal cooling and noise reduction.
    From time to time, I clean my fans for laptop using compressed air stream and the fans are running more silent.

  • Satellite A100 PSAAR - the hail its Windows 7

    Hey guys,.

    I have a Satellite A100 (PSAAR) that I was running a beta version of Windows 7 on (I had updated to Vista).

    When I decided to format it and install a new version of Windows 7, audio has become really intestine.

    Is there a driver Toshiba I have not installed... or if anyone else has experienced the same thing?

    Thank you!

    Hello

    I doubt that you need no additional driver.
    It seems that the sound card is properly recognized in Device Manager. so you don t need the sound card drivers

    I think you should check the sound volume control in Control Panel-> sound control.

    Check if all controls are set at a higher level

  • Satellite A100 PSAARA - Boot Fail

    Model - satellite A100 PSAARA-055007
    OS - Windows Vista Home Premium 32 bit
    BIOS Version 5.10

    Problem.

    The wil laptop no bootinto windows.
    POST returns full and then fails to start windows. In the upper left corner of the screen, it shows TBX error.
    The lack of loading, he doesn't want to load windows normally or in SafeMode etc...

    I tried each of the options without success. Some research has shown that need to Flash the bios with the latest version, because it may be damaged.
    I downloaded the latest version of the bios that is V6.00. I extracted the file on another laptop. It burned to a bootable dvd and then tried to run the .exe program, but he could not run. This is due to the program who need to run under win32. I can't run this file on windows because it does not load windows. I have no recovery disk either...

    My questions are

    The bios goes to work to solve the tbx error flashing?
    If so how do I Flash the bios from a bootable dvd?
    If this is not the case, can someone advise please how to do this.

    Thank you very much.

    Hello

    I think that new OS install should help you solve this problem.
    If you don t have a Toshiba Recovery disc, then try to start from the common drive of Microsoft.
    You can also try to boot from a live CD as PartBE or WinPE
    Google for it. This allows you to create a live CD that will start the unit without installation of the OS.
    This allows you to access the files on the HARD drive.

  • Satellite A100 (PSAARA) - upgrade of RAM possible?

    Hello

    Just wondering if I could update my current ram in my laptop Satellite A100 and if so how?

    He is currently a Satellite A100 (PSAARA) with 2 GB of RAM.

    Processor: Intel (r) core (TM) 2 CPU T5200 @ 1.60 GHZ 1.60 GHz

    Running Vista 32 bit.

    What type of RAM upgrade I could on this system? And what code PIN?
    And I know that this may be a shot in the water, but is it possible to update the graphics card at all?

    Sorry am new on this... no idea what I'm doing, so if you could help I would appreciate it!

    Thank you

    > And I know that this may be a shot in the water, but is it possible to update the graphics card at all?
    No, the graphics card can not be upgraded

    > It's currently a Satellite A100 (PSAARA) with 2 GB of RAM. What type of RAM upgrade I could on this system? And what code PIN?

    I think modules laptop use the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM, but AFAIK the 2 GB of RAM is max and this would mean that it of not possible to upgrade to 4 GB or more

    But to be 100% sure, you should consult your user manual.

  • Satellite A100 PSAARA - Questions about RAM, VGA and BIOS

    I used Toshiba Satellite A100 PSAARA, now I have a few questions:

    1. I have updated the BIOS for my laptop (new version 6.0 to version 5.10): everything seems to work ok, but after I rebooted the laptop, it automatically connect a black screen with these warning "checksum bad sectors, F1: default settings, F2:..." (remember exactly).
    I pressed F1, my Toshiba reboot works ok after that, so there's something wrong with this warning?

    2. I upgraded RAM to 2 GB (1 GB + 1 GB) with the KingMax brand, if the RAM expandable max I can do on my laptop?

    3. This Toshiba laptop use to edge or video card, I check my Nvidia geforce card real estate (laptop) and I saw this: memory: 256 MB + RAM shared memory: 256 MB = 512 MB of total memory?
    So: can I upgrade my card graph and maximum card that I can use?

    4. I cannot set 75 Hz for refresh monitor, can see 65 Hz

    Thanks for your help!

    1. try to load the default settings in the BIOS. Then it should work.

    2. the Satellite A100 supports 4 GB max.

    3. No, the graphics card can not be changed. It s soldered on the motherboard and cannot be exchanged.

    4. what internal or external monitor? Monitor internal and other s LCD works best with 60 Hz.

  • Need drivers and software for Satellite A100 (PSAARA)

    1. Please can someone me link to the tracking software: Ulead_DVD_Movie_Factory and Intervideo Win DVD

    2 when I check my device manager I got the exclamation with these drivers:
    Protective FileDisk and SMI kernel driver driver helper

    I m using the Satellite A100 (PSAARA), win Vista Home Premium
    Thank you!

    Hello!

    The Ulead DVD Movie Factory and WinDVD, you can download the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    I never heard of this exclamation point in device, but on the Web site manager you also download all the drivers and installation instructions document where you can see what drivers need to be installed there.
    In your case, I would like to reinstall Windows with the recovery disk.

    Good bye

  • CARD reader may not be detected for Toshiba Satellite A100 (PSAARE)

    Hi team,

    Please help, as I have Toshiba laptop with model Satellite A100 (PSAARE) which had Vista then I upgraded with Windows XP, now my all software works except the card reader which doesn't detect any card of same SD memmory so that the driver has been installed... Please sat down

    Are you certain that the card reader has installed the XP drivers (and they are the exact brand and model of player)?  This is an internal or external card reader?  I suggest that you check with Toshiba to make sure you have all the drivers, firmware, or software required for the card reader (it may just be a pilot - it may need more).  I would also re - download the driver and uninstall the old and reinstall a new where the original has been corrupted for some reason any.  Are you sure that even with the drivers, that this computer model can handle XP completely and that you are not a problem of compatibility (I contact Toshiba Technical Support and confirm what you've done is perfectly possible, including the card reader).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Satellite A100 - will not charge the battery

    Hello

    I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

    I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

    Best regards
    pawelg

    Hi pawelg,

    I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

    By the way: you can buy a new battery to an authorized service provider. ;)

  • Satellite A100 (PSAARA) - I can not use the remote control

    I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

    Thank you!

    If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
    If this does not help please let us know.

  • Satellite A100-383 does not - the battery is not

    Hi all

    I own a satellite A100-383 (PSAARE) that does not start when the battery is totally empty, or if I leave without the battery of the day to the next. The battery will charge not façade is and all the lights are off. I should always have a load on my battery and don't let not unplugged more than 2 days.

    If for some reason, my battery was completely empty, Plug and unplug the power supply from the wall outlet would make all the lights increase and charge the battery again.

    Unfortunately, I went on vacation and I forgot my pc unplugged and it does not charge or turn on. ? The headlights are off. Tried my dear old method to connect the unit several times with battery and without it with no luck... I could see a connection for a second or two, but I wasn't fast enough to plug in and they are off.

    I would be so grateful to you all if you give me a help to put it on my pc. Once I have it on the load and back I'll buy a new battery for sure.

    I look forward to reading your advice.

    Thank you all in advance!

    Post edited by: Soneu
    The battery will charge not façade is and all the lights are off, when the battery is completely empty.

    Post edited by: Soneu
    Running Windows 7 32

    Thanks for the comments. I just want to say that you should buy high quality and Toshiba of origin of the product and not a cheap no. product name.

    Good luck.

  • Satellite A100-158 connects to the WLAN but not to internet

    I have a Satellite A100-158. It is used to disconnect frequently the network wireless in my house, but now even if the connection still appears on the program of Intel PROset/wireless and is shown as connected, I can not access the internet more. I don't know what the problem might be that the wireless signal is excellent.

    For the moment, I plugged the Ethernet cable to the router to access the internet. Does anyone have any suggestions as to what could be the problem?

    Hello

    I can't provide the exactly the solution to this problem of WiFi, but I think you should check the whole parameters on the WLan router.
    First, you must remove all security settings such as encryption key and MAC address filtering.

    Then check the settings of the laptop. If you use a Wlan configuration tool as Utility Intel ProSet windows has the configuration option must be disabled!
    In addition, access the Wlan properties and check the TCP/IP protocol settings.
    The IP address, subnet mask, and the default rejuvenation should be set to automatic

    Good luck and look at a few

  • Satellite A100 - defective speakers, gives the crackling

    I have the Toshiba Satellite A100 model.
    My speakers do not sound right.
    Left speaker does not work.
    They give a crackling.
    Audio, video, doesn't sound right.
    Whenever I play a song it gives a feeling of speakers are blasted.
    When I turn the volume down they sound a little ok.

    Advice needed.
    I need to replace speakers or should I update the drivers?
    Thank you...

    After reading your ad, I think the speakers are defective and must be replaced.
    You can try to change some sound settings to see if something will change.

    In any case, I think driver has nothing to do with it and you need new speakers.

    Have you tested with headset or headphones? How does it work?

  • Satellite A100 - options to close the lid for the laptop are not available

    Hello
    I have a Toshiba Satellite A100 - it came with Vista - I carefully cleaned the HARD drive and installed XP - I deleted the partitions etc. and started with a HDD in a perfect state of cleanliness.

    Then, I downloaded all Toshiba drivers that are available for my model.

    When I close the lid it still fully powered - there is no option to go into sleep mode, Hibernate etc in the options of "close cover" - the only option is the "status quo".
    How can I get the standby extended/standby/power options back?

    Your help would be appreciated

    Helen

    Did you installed Toshiba Power Saver utility?
    These options that you can find.

  • Satellite A100-570 slow downs the wide connection band

    I have a laptop Satellite A100-570. I bought this in July antiques.

    Just open the laptop, not even connect to the internet it manages reduce my speed on broadband.
    I know this because I'm doing a test of speed before and after the opening of the laptop using my PC.

    Computer laptop & PC are not yet in the same room!
    The wireless network connection is disabled, disabled 1394 connection and only LAN OK.
    (I use a BT Homehub, connected to my PC).

    My question is: how a laptop computer that is not on the internet brings to BB speeds.
    the laptop is o.k. otherwise.

    Any help appreciated.

    To be honest, the whole story is a little understandable and strange for me.
    Your laptop is connected to the router with a LAN cable or what?

    Sorry but I don't quite understand you. What is the speed with and without a cell phone?

    By the way: did you clean install of the OS before you start using this laptop?

Maybe you are looking for