Satellite A100 (PSAARA) - I can not use the remote control

Similar Questions

• Satellite P750 114 - how to start using the remote control

  Hello

  Does anyone know how to start to use the remote that came with my makeup P750 114.
  When I press on simple volume keys + / doesn't seem to work.
  I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

  Hello

  A remote control that is included with some models allows you to perofom certain functions.
  Using the remote control, you can
  -Navigate and control the media center window
  -Check the video or live tv display
  -Place the computer in and out of fashion "Eve".

  There is a button on the remote control.
  It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
  You will find options; do nothing, sleep, hibernate, shut down.

  Hope this helps

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• Satellite A100 - 811 PSAA8E - can I use the function keys to control winamp?

  A similar problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26351

  My question is: can I use this buttons included the following buttons, back, stop, and pause to control winamp?
  My model is 811 A100 PSAA8E

  Thanks for any help!

  Try to activate the "Global Keys" in the preferences of-> Winamp Plugins section.

  By default, the keys are on:

  Rewind/FastForward = CTRL + LEFT and ARROW CTRL + RIGHT
  Previous track / next track = CTRL + HIGH and CTRL ARROWS

• Satellite A100-062 psaane: can not get the card reader to work

  Hiya... Please can someone help?

  I try to use my card reader with a Pro duo stick.
  I put it in the Pro duo adapter and when I put the card in the slot of the card reader that nothing happens...

  Thank you in advance if you can help.

  cordially imalive

  I use the memory stick duo adapter and when I on it on the inside of my Satellite in Windows Explorer is happening again drive (F) and symbol that shows Memory Stick.

  Try to please several times to put inside. I remember that in my case it worked after the third time I put it in the slot.

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• using the remote control of the DVD does not select the correct buttons?

  Hey Ya'll,

  Project is almost complete, but I ran into one, which I think is a very simple problem...

  On my main menu, I have a total of 5 buttons on 2 rows.

  Line 1 to 2 buttons and Row 2 has 3 buttons.

  The links are correct, because they work fine in preview mode, using the mouse, but also view the version on the pc using Cyberlink DVD Viewer, once again, using the mouse to select the button.

  The problem is when you use the remote control, either on the copy engraved in the DVD player, or in preview mode, if I use the directional buttons of remote controls, that he does not want to go to the buttons I suppose it must

  (Top row left to right, then down row from left to right)

  On each of the properties of the buttons Panel, I chose the right (I guess) option number (just below name) for each button... IE top left set the right value top of page 1, 2, bottom left 3, the middle value 4 downstairs and down to the right the value 5.

  Type is set to Normal, the button name and Synch text is checked (although the No button is real, each is just a Word text, in photoshop, when I did originally the menu..)

  Also the low middle button never gets selected with the remote control of the DVD... Preview, using the buttons on the remote control, he finally gets selected, but it takes a bit of comes and goes, and the highlighted button is rarely what you would expect, since direction button your pushing.

  #1 button (top left) is set to the default button, which I want, but do not know how I set that, unless it's because it was the first button, I myself made/converted to the button)

  Here, any help would be greatly appreciated... that should finish this project!

  CB

  Cowboy Bob,

  No, what you did with the binder is actually linking these buttons to the assets.

  It shows a Menu with several buttons, icon manually road buttons depressed. Once you choose manually the buttons of road, they can change exactly what will make the remote control.

  

  As said, when you create a Menu, buttons start at # 1 and progress upward. Each Layer Set button plus up in the Layers Palette. This is the routing of the buttons Auto gets its information and it usually works. However, if you move the buttons around, removes some, etc., the en can get confused, manually their routing is the best way to go.

  Good luck and we hope this helps,

  Hunt

• Using the remote control in parallel and touch screen.

  Hello.

  Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and has been synchronized with the touch screen. Can I use remote control when the touch screen is activated. Now the remote control is locked.

  Thank you to.

  Hello

  N ° when a codec is associated with a touch controller, it is not possible to use the remote control.

  You question No. 677 in link below

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.PDF

  BR Oleksandr

• SX20: Definition of system using the remote control password

  Hello

  Cisco SX20 Quick Set: TC6.1

  I usually know the system password is set using CLI Web.

  But I would like to know if it is possible to set the system password using the remote control.

  If so, can you guide me.

  Thanks in advance

  Hello

  the remote control you can set the menu password, system password is not remotely possible.

  You can also set using cli commnad.

  xcommand SystemUnit AdminPassword Set Password: xxxxxx

  HTH

  Kind regards

  Dharmmesh

• Error step 7, creation of WebCenter, and schemas content using the remote control

  Hi all

  I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.

  This is the content of install_setup.log

  Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance

  Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..

  localhost.localdomain:1521:ORCL

  Installation of patterns Begin spaces

  Please enter the password(User:sys) of the database:

  Processing of command line...

  Timeout connecting to the database. Current timeout value is 30 seconds.

  UCR-6090: jump main operation: validation step connection failure

  And the rcu.log

  14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...

  14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...

  14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))

  14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))

  14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:

  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.

  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)

  at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)

  at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)

  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)

  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)

  2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure

  2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure

  Any suggestions?

  Best regards!

  Hello

  (1) you see no error on the Setup screen? If Yes please download the screenshot?

  (2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.

  Also, can you please try the following and check the box.

  Go to the location / / rcu/config /

  Take backup for the file rcu.properties, and then change the below

  JDBC_LOGIN_TIMEOUT = 30

  TO

  JDBC_LOGIN_TIMEOUT = 300

  and try again.

  Concerning

  Françoise

• Satellite A350-110 - where can I find original remote control?

  Hi all!

  I have a little problem. I am looking for the original remote control for my laptop.

  something like this, but original Toshiba:
  http://www.notebookcheck.pl/typo3temp/pics/27bfde7707.jpg

  Do you know where I can buy the original Toshiba remote for my laptop?

  Please help me.

  Hello

  Please don't get me wrong, but why you think something like this exists for your Toshiba laptop?
  If some specific models can operate with the remote control then you will he obtained with your computer laptop and laptop will have onboard wireless sensor.

  You are 100% sure that your laptop is such distance sensor on board? I don't think so.

• Satellite A100: To receive data can I use the remote port IrDA?

  Hello

  I have an A100 which has infrared, which is used for the remote control supplied with the laptop. I was wondering if this infrared receiver can be used for other devices (e.g.: mobile phone) other than the remote control.

  I checked the control panel and Device Manager and both have no infrared information, but I thought that it would be always necessary even for the remote control.

  Help, please.

  Thank you.

  Hello

  I think that it s not possible to use the IrDA remote control window to receive files or data.
  I wonder how it should work if you don t have IrDA options in Control Panel.

  If this option is not available in the Control Panel, you cannot activate the IrDA and you can't assign a download or download the IrDA connection. So in my opinion you can't use it as a connection port.

  Unfortunately ;(

  But I found external solutions. If you want to use the IrDA, you can buy a USB IrDA key. I didn't test this device, but other people on the net have used it and it works.

• Satellite L650-11R: I can not disable the WiFi using Fn + F8 module

  Hello!

  I have a rather strange problem: I can not disable the WiFi using Fn + F8 module.

  It happens after reinstalling Windows. I installed Windows 7 Pro SP1 x 64 (MSDNAA). I installed the driver Broadcom WLAN, then Toshiba Value added package and Bluetooth Stack from Toshiba Web site.

  When I press Fn + F8 there is only a Bluetooth icon, I can enable and disable. And there is no WiFi icon.
  Wireless network card is listed in the Device Manager, it works.

  Before you reinstall Windows, when I had used pre-installed Windows 7 HP, it worked correctly: there were three icons, I could turn off/turn on WiFi, BT and the two WiFi + BT by pressing Fn + F8.

  Does anyone have a problem like this?
  Can someone help me?

  Thanks in advance.

  Hmm generally the FN + F8 should switch on / off the Wlan correctly.
  Maybe the WLan driver must be installed again even if the wireless network adapter is already visible in Device Manager.
  Try it

  Welcome & good luck

• Satellite 5200 701: I can't use the TV-out more.

  Hello
  This is my first post on this forum. I have a Satellite 5200 701 for 3 years now. I can't watch movies on my TV. I could use this function in the past.

  Last November, I formatted my laptop with CD from Toshiba. As I didn't have a TV, I tried not using the TV function. But now that I have a (different) TV, I tried to use it without success.
  When I press Fn + F5, nothing happens. When I go to the selection of the screen, I can select the 2nd display but in "Advanced", I can't find the same features I've had in the past (before formatting). I don't have the Nview utility in "Advanced"...
  Is this a driver problem? NVIDIA, Toshiba or Microsoft? Problem of material...?

  I don't know how to solve this problem.

  Kind regards
  jimbow

  It cool s that you have solved the problem.
  Thanks for the information. It could be very useful for users of the Toshiba a different forum.

  concerning