Satellite A100: WLAN not working after 'down' grading from Vista to XP

Similar Questions

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TouchPad does not work after the downgrade from Vista

  I found this before a year ago but I can't find him. It's a program that will enable the touchpad after going from Vista to XP.

  Fn + F9 does not help, Ive already tried to reinstall the drives and the utility of ON / OFF.

  Hello

  Usually a toggle Touchpad utility would enable and disable the touchpad by pressing the FN + F9 keys.

  I think you could find it on the page of the European driver Toshiba

  Welcome them

• ScanDisk will not work after being planned in Vista

  Click on: drive > properties > tab.click Tools check for errors and check the two boxes.to automatically fix the file errors.and to check and recover bad sectors.reboot.no scandisk.just directly in windows.it it rub the simple 3-step windows scan breast... but not the full scan that I'm wanting.this is the only pc I've seen who has this problem , and he always does after a complete restoration of the original image.

  * original title - why the schedualed error checking is not working after reboot, (win ista home premium 64-bit) *.

  Hi magicman77,

  1. you try to perform disk error checking on the drive on which Windows is installed?

  I suggest you to schedule chkdsk /r to reboot following the steps mentioned below and check if it helps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:

  Chkdsk /r

  c. When you are prompted to schedule chkdsk at the next reboot, type 'Y' (without the quotes) and press ENTER.

  d. restart the computer.

  WARNING:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference link: check your hard drive for errors

  I hope this helps.

• Satellite A100-192: FN keys do not work after the update to Vista Ultimate

  I am a user of Satelite A100-192. Yesterday I installed Windows Vista Ultimate on my laptop. After installation, I realized 'Fn' and media player function keys buttons on my laptop keyboard do not work. What can be the problem?

  Hello

  Who knows? It s not easy to say what's wrong.
  Satellite A100-192 belongs to the PSAA9E series.

  All the drivers, tools and utilities need to be downloaded from the series on the right. Choose this model number!

  On the page of Tosh, you will also find the Installation Instructions. The drivers must be installed in that order. This is important.
  and don t forget to install the package of value added

• Satellite A100 - USB not working not not after installing XP

  Hi guys

  I am reloading Satellite A100 PSAA9A OCV004 for a friend he lost discs, so I loaded a legal copy of XP home everything goes well so far but I can't get the USB works any ideas?

  TNX Mick.

  Hi Mick,

  Have you installed new Service Pack 3 for Windows XP? This is important because it contains many important updates.

  After the installation of Service Pack 3, you can start with the installation of the driver. Everything you download from the site Web of Toshiba.
  It is also important that you install the chipset driver.

• Satellite A50 does not work after BIOS update

  Hi all
  I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
  The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

  I tried the suggestions in the following link
  http://askiris.Toshiba.com/ToshibaSu...200%2035586212
  However, it did not work.

  However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

  Can someone help me please
  1. How can I update the BIOS to get my PC to running back.

  2. to turn towards links where I can find the files in the link above.

  Thanks in advance.
  Best regards
  Parag

  > 1. How can I update the BIOS to get my PC to running back.
  Not possible if your ROM BIOS module was bad flashed.
  If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

  > 2. Point me to the links where I can find the files in the link above.
  There is no link! You need to ask to help ASP.

  Good bye

• Re: Computer laptop Satellite U does not work after BIOS update

  I was updating my BIOS.

  My computer restarted abruptly, saying: there was a problem and that a check should be performed.
  After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.

  When I rebooted, it stopped working correctly.
  The screen, keyboard and USB ports do not work.

  Can anyone help with this?

  Hello

  Looks like something was wrong during the update of the BIOS.
  In this case the module ROM was flashed properly and therefore your laptop cannot start properly.

  I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module

  Good luck

• Portege R600-10 q - DVD drive open / not work after the start of Vista

  Hi all

  Its my first post here =). I just bought a new Portege R600-10 q (PPR61E) and I have a problem. The DVD player does not open / works after Vista started... it works very well, or at least opens / orange light turned on, before the page of connection, but after that nothing.

  I have done't the thing of high-low values regedit to see if it works, but still nothing.

  The device does not appear in Device Manager, so I can't remove and reinstall.
  I did all possible updates to toshiba and MS, nothing helps.

  Can someone point me in the right direction?

  Thanks in advance.

  Steve

  Hello Steve

  I don't know what you've done in the past, but I would like to know if everything works with the factory settings.
  Have you tried to install Vista using Toshiba recovery image?

• Tecra A9 - network does not work after wake up from the sleep/hibernation mode

  I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
  Keep it light, but there is no network and to solve it, I need to restart the laptop.

  Any help please.

  Kind regards.

  This is a known issue so take a look at this site:
  http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

  Updated the BIOS, and then it will work.

• Dell Inspiron 1750, Windows 7: HL-DT-ST DVD +-RW GT10N not working after critical updates from MS

  I'm having a problem with my Player DVD - HL - DT - ST DVD +-RW GT10N.  I have a Dell Inspiron 1750, Windows 7.

  It was working fine, then after 3 critical updates from MS, it stopped reading/writing on the DVD player.  The only way I can access the DVD (read or write) is to restart.  A subsequent loading of different or even the same DVD finished with the issue of not being able to recognize the DVD.

  When I click on the properties of the DVD drive in Device Manager, it clocks.  However, after a reboot, the properties has worked well and said that the driver does not work properly.

  I got to the period before 1st update was installed and the DVD player worked as before.  However, Ms. downloaded the same (I assume) updated critical shortly after.  Low and behold, the DVD player does not work yet.

  The MS CD/DVD patch could not fix.

  I also tried UpperFilters/LowerFilters regedit deletions, but it is impossible to find these entries (http://support.microsoft.com/kb/982116 > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}).  Thank you Osprey4 for your help continues.

  I hope someone can help me.

  Thank you

  Duane.

  Open Device Manager, right-click on the component, and then select uninstall.

• in fact, down grading from vista to xp pro.try recovery disk of one model on the other model (but same brand laptops) but two laptops has different processors and built various bone.

  I had two toshiba model laptops.one (satellite A100) used by processor with windows xp pro as os centrino and the other (satellite A135) with processor core 2 duo 1 GB of ram which has windows vista family premium as OS.i would change with the operating system of the second laptop (A135) for windows xp pro.can I use the recovery of the first disk cell (contains xp pro os) to install xp pro os on the second laptop which until now has vista Home premium? Can u pls tell me that the recovery disk for xp pro os with centrino processor compatible with the system which works on the basis of processor duo laptop?

  OEM and retail licenses:

  If your computer is pre-installed with Vista, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Installation of XP instead of Vista:

  Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

  If the XP drivers are not available for your model, forget the idea.

  If Yes, download and save to a CD or Flash drive.

  Then buy a disc XP and license.

  Save all your data because it will be lost during the installation of XP.

  Then follow the steps below to do a clean install.

  http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

  Once installed, reload ALL your other programs of original media, or download again.

  Reload all drivers and utilities for your motherboard.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A100-062: I would like to downgrade from Vista to XP

  OK, I'm helping a friend who has two Toshiba laptops, about 5 months (with XP) and another with Vista. For various reasons: lack of support of pilots for its 2 years, printer, the software does not not etc. - I would like to 'downgrade' the new laptop to XP. The model is a Satellite A100-062.

  Is it as simple as just install XP and Vista (good riddance) - crush or am I'm going to have problems with a lack of Toshiba XP drivers for this particular machine?

  Thanks in advance

  Hello

  > Is as simple as just install XP and Vista (good riddance) - crush or am I'm going to run in
  > problems with a lack of Toshiba XP drivers for this particular machine?

  Well, on the page of the Toshiba driver you will only find the Vista drivers.
  But don t worry the A100 many different A100 series notebooks were shipped with the same hardware specification.
  I simply recommend you test different drivers from different series Satellite A100 and Equium A100.

  Additional information on the Tip:
  Why you n t create a second partition on the laptop and install the XP operating system as a second operating system.
  In this case, you can use the two BONES.
  What do you think???

• access keys stopped working after the upgrade from vista to windows 7 Professional,

  keyboard shortcuts no longer works after upgrading vista to windows 7 Professional, I have a desktop hp, 64 bit, and use of wireless, my keys, i.e. hot keyboard.  have been, key, key club hp, search key email, help key, eject the dvd buttons, stop, play, etc. before keys do not work, THE VOLUME BUTTON SLEEP MODE KEY ŒUVRES WELL, Please HELP, HP AND MICROSOFT will not HELP ME, ILS ARE SAYING what CALL HP, HP SAID CALL MICROSOFT, SO No. MORE MICROSOFT or HP for ME ANYMORE ITS APPLE MAC TIMES, THANKS IN ADVANCE

  You need a version of Windows 7, the keyboard drivers for your HP computer model.  Go to Support & drivers HP to start site. Boulder computer Maven
  Most Microsoft Valuable Professional