Satellite A105-S4274 has only a black screen

Screen saver burst on the laptop and I closed it.
Open it back up and the screen is blank.
It starts at the splash screen and stays black. I can boot into SafeMode ok. I guess it's a video thing. I have the chipset for the installation, but I get no info in the settings of the card, only this...
chip type: not available
DAC type: unavailable
memory size: not available
channel of the card: not available
BIOS information: not available

What is going on. I'm doing something wrong? Thank you

Hi mate,

you said screensaver is appeared and firm. This means, after the loading of the screensaver, your computer crashed? Then you the switched on again ("Opened it back up and the screen was empty.") and no photo was available.

Moreover, operating system you have? Please, give a better and a MORE DETAILED description since it s impossible to solve a problem without any information. What do you have before the problem happened? You have installed some new software/drivers/etc and so on.

I'm waiting for your answer.

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite A105-S4274: need driver ethernet XP & screen is sometimes black

    I recently reformatted a Satellite A105-S4274.

    He has Xp SP3 I can't find the correct Ethernet driver.
    I installed all those on site pilot Toshibas to this model and stands still as no driver in the Device Manager.

    I also noticed that sometimes the computer goes black screen on me.
    Do not fall asleep, but go just black. Any ideas on what causes this?

    Maybe the driver problem?

    Hello

    Driver Ethernet means both: LAN or WLan.
    What device is already listed in device-> network cards Manager?

    If the LAN card is already listed then you need WLan card driver.
    If the wireless network card is listed then you need to install the LAN driver.

    With regard to the black screen.
    This happens if you touch the laptop for some time t n?
    S notebook my screen password if I put t touch for a while.
    I put the settings in Toshiba Power Saver-> screen and the screen turns OFF after 10 min.

  • Satellite L300 has only a black screen and will not load.

    Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
    See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.

    Can someone help

    Thank you
    Tony.

    Hello

    You mean that you are not able to access the BIOS?
    Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor?  :|

    If nothing will not help to remove the battery and disconnect the portable AC.
    Wait for about 1 hour then reconnect both sides and try to turn on the laptop.

  • Satellite L300 PSLB8A display, only a black screen

    Hi guys

    Please help if you can; This morning I turned on my laptop (Satellite L300 PSLB8A-04R004 running Vista family) and all I get is a black screen.

    I tried removing the battery and turn on while plaugged in the power supply, same black screen.

    I tried to remove the battery then replace after 10 minutes, but the same black screen. All the power lights are on (but non-corps House).

    I tried everything suggested in support on the site page, but thought that you guys might have the answer?

    Thank you.

    > I have tried everything proposed in the support on the site page, but thought that you guys might have the answer?
    Seems that you have already tried a workaround solution that I would recommend.
    Disconnect the power adapter, remove the battery, wait 1 hour or more.
    Reconnect the two parts and then try to switch on the appliance.

    If that does not help, then you might try to start the device using a single module of RAM.
    Maybe it's a question of s a RAM...

    Otherwise it s necessary to test the material parts and run diagnostic checks.
    This can be done by a Toshiba ASP.

  • Pavilion dv6 - 3227cl laptop entertainment puts but has only a black screen

    HP Pavilion DV6 - 3227cl Entertainment Notebook, which is about 2 years old and works on Windows 7 Home Premium, AMD Vision Premium, will to power, but not start.  The fan works and the "caps lock" flashes once approximately every 4 seconds, but all I get is a black screen with no error message or the cursor.  There are no beeps.  The power led lights (white) for about a second, then turns to a dim orange when the battery is installed, but remains white when the battery is removed.  However, the two lights (I'm not sure what they are for) next to the nearest port USB power light lights up as follows: one on the left (as you are looking at the right side of the laptop) is white; the right one is orange.  Both are fully illuminated, (not vaguely that the power light).  The power light is not as bright as the other indicator white located near the USB port.  The laptop started and seemed to be running once since this problem started, but I was not able to start again.  I'm told the battery is bad (it's my brother in law book), but it is possible that the problem is with the power source rather than the processor or motherboard?  I appreciate your comments/advice about this.  Thank you.

    Hi fejevitzky,

    Your question, "according to that, I think you're telling me you don't think it's the BIOS - is that correct?" Yes, as long as you don't see any "white" light reveals LCD bezel back while with the State of the white screen. Bezel LCD's coverage around LCD, most design put modeule LED in the lower corner next to the LCD. While the backlight is not during the boot sequence, which means system doesn't have chance to get BIOS current enforcement program. It also means, he stuck to the condition of the equipment to set up. Normally this motherboard related.

    Quickly, I checked hp.com and found a link that may help. Or 1-800-HP-invent (1-800-474-6836) can save time. This forum only intends to answer fast/just the users questions. On another charge of repair and maintenance, I have to give you other links to achieve.

    HP Partner and Store Locator: (I try to search for your city, but it does not work well.) Suggest that call you for a quick response)

    http://WWW8.HP.com/us/en/store-finder/index.do

    Contact information:

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    Contact HP:

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    HP SmartFirend Services: (I saw with the price of the service)

    https://h30617.www3.HP.com/HP/home/index.asp?JumpID=in_r11682_us/en/HHO/PPS/suppgateway_gi_ob_ds_pd/smartfriend_cc/DT

    Thank you very much. If you think that my answer helps your product, please help to close this case once you feel comfortable. Then, click on "CONGRATULATIONS."

  • test the application on the device displays only a black screen.

    Hello
    I've created Hello world app, app works fine on the Simulator.
    But when I install this application on the device and the launch of devie it shows only a black screen. I'm not sure what is the reason for this.
    Device that I use is Intex clouds fx.
    Everything here in the face of this problem?

    Thank you

    Hi @bhuvan
    I solved this problem by adding this css on my html page.
    HTML, body {}

     background: white;
    

    }

    For some strange reason, app is running but watch entirely black screen.
    Jan Jongboom has helped me to fix this problem, I asked this question on stackoverflow so... Here is the link to this question.

    http://StackOverflow.com/questions/25831952/Firefox-OS-Hello-world-app-works-fine-on-Simulator-but-displays-black-screen-mob

    Hope that this tip will solve your problem as well

  • whenever I start PC as normal, that it would take me only a black screen

    ORIGINAL TITLE: I need help with my computer

    My computer has windows vista installed in it recently whenever I start it as normal, it would take me only a black screen where there is nothing else than the mouse there.
    Is there a way I can fix without having to lose all my data?

    Use the system restore:
    http://Windows.Microsoft.com/cs-CZ/Windows7/what-are-the-system-recovery-options-in-Windows-7

  • Dear Sir, I am unable to see you tube to firefox browser. hearing is only audio. black screen appears. I can see it on other browsers. Please notify.

    Dear Sir, I am unable to see you tube to Firefox browser. hearing is only audio. black screen is displayed. I can see it on other browsers. Please notify.
    However, I can see thumbnail when I move the mouse over the timeline of the video stream.
    concerning

    3 Paz,

    If you can't update your graphics / video driver, try turning off hardware acceleration.

  • Webcam on Satellite U500-17 x only shows black photo

    Hello

    I bought a portable 17 U500 x about a month ago. I'm on Win7 64 bit version that came with the pc.
    The webcam worked perfectly in the early days. Then I didn t use it for awhile and now it only shows black picture on webcam of Toshiba, msn or Skype software, all have the same problem.
    I didn't change any setting of the device. they have all of the default settings. The blue led on the side of the camera turns on but only a black screen.
    If I use the software Toshiba cam and try to take a picture it says "failed to capture the photo.
    On "Device Manager", the tab for imaging devices shows usb 2.0 uvc webcam without error and with the updated drivers. I get no error at startup or when opening the cam applications.

    I got drivers win7 European Toshiba webcam website "20091112111752" and them again after uninstalling the cam Toshiba Software I had installed. Also reinstalled the device of face recognition.
    The problem persists...

    Any idea?

    Best regards

    Hi Costa

    It is not easy to say what the problem is here. All that you have done is just but I think it's time for a more radical, but also more effective solution (test). Reinstall the operating system and test the features of cam with the factory settings.

    It should work again. If it's not... maybe service?

  • cannot re start my system by getting only a black screen with recovery of window failure

    original title: do not re start

    I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
    Myrna

    Hi myrnaspiers,

     

    1. What is the exact error you get when you try to start windows.

    2. what type of installation you have done, it's a custom Setup or an upgrade.

    3. check if you have the option to go back to the old version of windows.

    I suggest you follow the link to black screen when I start Windows 7 below.

     

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

     

    I also suggest you start in safe mode.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

    To open the Startup Repair refer

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

    For more information about the Startup Repair, refer

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  • I managed to install simultor but that I only see black screen

    I see not all contain on the Simulator

    only see black screen, what is setting for it

    now I am able to see the display screen

    After logo Blackberry now I am able to see the screen

  • Satellite U500-1E0 - Webcam shows only a black screen

    Hello world

    I have this problem, my webcam does not work. It has a blue light which indicates that it is running but it only shows the black screen. I tried to update software, uninstall, reintstalling once again, but nothing helped. I even downloaded a new driver from the Toshiba Web site but nothing.

    Please, does anyone have a any solution to this problem?

    My laptop is Satellite U500-1E0

    Thank you
    E-mail: [[email protected]]

    Hey,.

    If the webcam shows just a blank screen, I could imagine it's just a setting incorrect webcam.

    On the Web from Toshiba site, I found a helpful article that I think:
    [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

  • Satellite A100 system goes to a black screen after the recovery procedure

    I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
    Because I don't have that one CD I have support on ignore.

    I tells me that the installation is complete and I can restart my system.
    Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

    Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

    Help me please!

    Hello

    The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
    I think that the message and the possibility to insert the second CDconfuses a little.

    In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
    Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

    But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

    It's worth a try.

  • Satellite L675-10T stucks in a black screen after the new RAM upgrade

    Hi all

    I recently decided to upgrade the memory in my laptop pretty.
    I went online, has adapted Rams and ordered.

    What I got are 2 of them:
    http://www.offtek.co.UK/RAM-specification/Toshiba/Toshiba-laptop-memory/satellite-L675-10T/pid921300

    The installation is very easy, but as soon as I turn on my laptop, it stucks in a black screen with a straight white line underscore.

    I guess it's an incompatibility problem?
    Could you please help me?

    Thank you.

    I think you're right, it seems that the modules are not totally compatible, even if the online retailer page says they are
    You can remove the new RAM modules just to check if the laptop to boot up properly I guess correctly the unit upwards.

    Solution? Use a different RAM modules I had good experience using modules from Kingston, they might be a little expensive, but I think they should work correctly.

  • My video played very well yesterday, now, he will play not (only a black screen in preview).

    My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

    My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

    ==========================================================
    I can only imagine that you are referring to Windows
    XP Movie Maker 2.1.

    Some general info that may be worth a visit:

    Since the issue is recent... it may be worth trying to
    do a system restore to an hour before the beginning of the question.

    See the following article:

    (306084) how to restore Windows XP to a previous state
    http://support.Microsoft.com/?kbid=306084

    If you have automatic updates of Windows...
    possible that a driver has been downloaded and installed
    It's not as compatible with your system such as
    you already had. This sometimes happens with video
    Drivers. You can try a system restore or a driver
    Roll back

    (306546) HOW to: use the driver to restore roll back feature
    a previous Version of a device in Windows XP driver
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

    Three possible causes for Movie Maker questions

    (1) the incompatible source files... (eventually... MPG or MP3)
    It is sometimes useful to turn off the filters.

    Tools / Options / Compatibility tab, uncheck all filters...
    also, it may be interesting to try left click on "restore all".
    Default button".

    Several formats are apparently compatible with
    Movie Maker, but the most reliable choices are:

    Photos - bmp
    Video - wmv
    Audio - wav, wma, wmv

    (2) files source corrupted... the only solution for this would be to
    Remove the source files of the project one at a time and
    try to save each time until the problem file is discovered.

    (3) project is too big or too complex for system resources.
    Create several small projects... Save as WMV.
    Then re - import WMV files collected / drag in the timeline
    and record the final movie.

    XP Windows Movie Maker 2.1...
    To save in a .wmv movie file...
    Type of... CTRL + P (or go to...) File / save movie file)
    to open the wizard movie recording.
    Choose... My computer.
    Next /.
    Enter a name and a location.
    Next /.
    ICT... "Best quality for my computer.
    Next /.
    Wait while the movie is saved.
    Finishing...

    XP Windows Movie Maker 2.1...
    To save a DV - AVI movie file...
    (and other options)
    Type of... CTRL + P (or go to...) File / save movie file)
    to open the wizard movie recording.
    Choose... My computer.
    Next /.
    Enter a name and a location.
    Next /.
    Show more choices.
    Other parameters.
    Open the window of the droplet and choose... DV - AVI.
    Next /.
    Wait while the movie is saved.
    Finishing...

Maybe you are looking for

  • Write continuously measure file problems

    I'm a new user of labview, so forgive me if it's simple, and do your best to not to judge my program because it is a work in progress. I tried to create an acquisition of data using a controlled box of activex and the complexity of a single loop slow

  • my key boad is t\putting to the top of numbes and missing5 h6elp letters

    Can I have a vi\us?  I \can can't spell estoe point any help that I can g5et would be app\eciated

  • FPGA error: failed to create the C Series module

    I use sbRIO 9631 with LabVIEW 2012, as well as the FPGA 2012 module. Everything worked fine until yesterday, I got this error when creating a new FPGA project.«LabVIEW FPGA: an error has occurred loading the VI on the FPGA device.»  Check that the ta

  • Most recent game crashing almost immediately on the launch titles.

    Just got a new system.  The old songs that I installed (WoW and Crysis) work very well. Three new titles that I bought (Dragon Age, Just Cause 2, BF:Bad Co. 2) crash almost immediately on launch.  I'm afraid to buy new software that I'm afraid that t

  • How to defrag my computer XP

    I have Windows XP Professional, I don't need to defrag my computer, I am clueless about computers, how can I do it, is there already a defrag on my XP program, or do I need another product? If I need another product, is it a windows one? Concerning J