Satellite A105-S4384 - his party using Ubuntu Linux 8.04

Similar Questions

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• Satellite A105-S4547 boots itself using the battery

  Hi I'm new to this forum. Since the "password" problem and reset the bios, I have two things to hurt.
  1 work dosent Touchpad, but I'am not really taken worth on this subject because I use a mouse anyway.

  The biggest problem is that off, he starts up again on its own.
  I have a temporary solution. I removed the battery and at the time where he stopped I turn off to AC power.
  Sometimes, when the captain is restored it restarts itselff, sometimes not.

  But will always be with battery. Resulting in a dead battery.

  Have looked everywhere in this specific problem with no luck answer so have resorted to a new thread. If anyone can help, so thanks in advance. exact model, Satellite A105-S4547

  Other info. did the upgrade of the bios, was no help

• Satellite A105-S4384 - a 4GB SDHC work?

  Help I can not get my A105-S4384 to see a 60 - HD 4 GB SD chip.

  Y at - it an upgrade online that I can download?

  I doubt that a SHDC 4 GB card works in the Satellite A105.

  Look in your manual, I can only find information that normal SD cards works.

• Distorted screen of the console using Ubuntu Linux on Satellite C70-B-212

  Hi all

  I have a problem with Linux on my laptop Satellite C70-B-212. The videochip Intel Graphics 4400 is supported by Linux, but on this laptop, it gives very distorted output on the console screen. I see a few vertical lines on the screen showing a few ghosts strange images of the output.

  The Office of exit itself seems to stop smoking well, until I have a screen and move it to the bottom of the screen. You can see the top of the screen some distortion in the upper line.

  In Windows everything works fine. When I use the parameter 'nomodeset' turns off the kernel mode setting these lines do not appear. But then, I expect that 3D hardware acceleration is disabled too.

  I suspect that this is a timing issue with the screen of the computer. Just a very minor lag on the clocks or sync.
  It could be just my laptop and then it just cloud be replaced or maybe it has to do with the series.
  Anyone seeing the same issue on this model or series.

  Having Linux on C70-B-212.
  Who can verify this by starting Linux liveCD on laptop C70-B-212.

  Thank you

  Marco

  Hi Marco

  It sounds like a driver problem => kernel.

  You can try a kernel later maybe?
  Do you know that you are using atm?

  in terminal type:

  uname - r

  Course Fedora uses 3.16 nuclei which is a very recent (if not the most recent) output.

  Some Ubuntu distro oriented have test of nuclei in the repositories, you will have to add it manually.
  Maybe it's worth a try?

  Tom BR

• Developing applications using Ubuntu Linux

  Hi forum, thank you for taking the time to read my post.

  I want to Blackberry develop applications... but I don't see a Java plug-in download compatible Ubuntu.

  Any help on this would be useful.

  PS.

  If your answers include anything that is associated with Microsoft, please don't answer.

  I look for ways to develop Blackberry applications on the Linux platform. Thank you

  If your responses include anything Microsoft related, please dont reply.
  

  Simulators will not work on just * nix. You can try the wine, but your best bet is parallels or VMWare.

  If you want to do everything and use only a device for the test, you still have a chance to be * nix only. I think he was talking about a plugin for linux, but I doubt he'll go anywhere if it isn't out yet. You can always use the BB Ant tools, make a maven plugin or build everything yourself via command line.

  Basically, it is not supported, but it is also not impossible... just search around to pick up the pieces.

• Satellite L300D: error loading operating system - Ubuntu Linux

  The easiest way, you could any body help me with "error loading operating system"!
  Completely screwed?

  have you checked whether your CD s severe correctly?
  What distribution you install?

• Satellite A105-S361 wouldn't boot CDrom or PXE Linux

  Hello

  I just bought a toshiba satellite A105-S361, I deleted all partitions & installed Linux operating system. After a few days, I find that, although everything works perfectly, I can't boot from the CDrom or network (PXE). No matter how I change the settings in the BIOS, it is just try to boot from the CD or network, it goes straight to the startup hard disk!

  I was wondering if the hidden partition that toshiba use for its "express media player", has nothing to do with helping start the laptop cdrom/lan as well!

  Otherwise, no idea why I can't boot from them?
  I'm really worried how to fix my laptop, should I have to re - install any OS!

  Hello

  First of all, you have installed Linux on the unit and Toshiba doesn't support this OS.
  Toshiba delivered and designed only with a Microsoft Windows operating system.
  I don't know if your question has anything to do with LINUX on your laptop but if the function m worked with the Windows operating system, so it must be a Linux question.

• Multimedia keys and third party players - Satellite A105-S4004

  Actually I don't have any problems with my multimedia buttons. Suffice it to configure them to work for Winamp.

  I have a satellite A105-S4004 with 4 (actually 6, if we count the first and the last two) multimedia buttons and I would like to play/pause, stop, and ffw/rew in Winamp, not Windows Media Player, as is its default behavior.

  The question is even greater because I know where to set it up, as I start the assistance of Toshiba and I start the Toshiba button control. From there, I click the multimedia tab and I have two menus, which I should be able to select another program for media to work with buttons.

  I have Winamp, iTunes, QuickTime, PowerDVD, RealPlayer and same Windows Media Center, none of them appearing on the list. The second list is even worse because I can't choose a DVD player by default program at all (not even win MP).

  So, is there something I can do, any third-party program that I could use to help me or any other tool to configure this or a setting that I missed? BTW, I have the latest updates of all the tools of Toshiba, so don't advice upgrade me... been there, done that, nothing...

  YOY ;)

  Hello

  I have the U400 and I can use playback, pause and another button with the application installed to WinAmp.

  If you want to use these buttons in WinAmp, you must activate the settings of Winamp.

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=138585

  Good bye

• Can I use ubuntu on my Satellite C850-A967?

  Can I use ubuntu on a Toshiba Satellite C850 A967?

  I have to post what written UndercoverLawyer.
  In General, you can use it but please note that Ubuntu is not supported by Toshiba and you're on your own with this.

  Before anything please create recovery DVDs. It is very important.

• Impossible to use on my Satellite A105 Multirecorder

  Hello

  Can someone help me? I buy a Satellite A105-S4074. It has a DVD multi recorder MAST * A UJ-850. More or less three months, that everything works fine. One day, I try to record a DVD, but when recording the time some problems it doesn't complete the file, then make it a driver message code error 039.

  After this problem it doesn't find it in my computer, I try to install but always make the code 039. So I did not install.
  Have give you any help to solve this problem.
  Thank you

  Hello

  At first try this please: http://support.microsoft.com/kb/270008

  If this does not please write again.

• DVD drive is dead - l need to reinstall XP Satellite A105

  Hello world

  My wife went on vacation in Hawaii, and while she was missing, its Satellite A105 (is no more under warranty with a dead DVD player) started to malfunction to the point where XP where freeze at startup.

  I tried everything I could, but it wouldn't boot.
  So finally I took a DVD USB drive formatted the drive with killdisk and tried to use the recovery disk to at least get the operational unit. Problem is that the unit does not complete the installation I get the following error:

  Windows cannot find c:/bin/errordialog.exe

  I thought it was the disk so I cleaned it and still the same thing, since I was a student, I had access to XP pro from the msdn network so I got a copy and still the same error.
  I don't have a big enough USB flash drive, and the laptop doesn't have a floppy so I'm stuck with no way to restore the operating system... Needless to say that the wife is not happy with me!

  I managed to get Linux installed without problem, but my wife wants his laptop back to xp and will probably hate me until I can correct what I did. Help, please!

  TIA

  As far as I know it s is not possible to boot from the CD/DVD USB drive and reinstall the operating system by using this procedure.

  I would recommend therefore to replace the CD/DVD drive with a new, then boot from the Toshiba Recovery CD.

  The CD/DVD drive is an essential device for laptop and it is worth having a what functions and trouble free work.

  Welcome them

• Re: Satellite A105-S2194 a audio driver missing or corrupt

  I have a laptop Toshiba Satellite A105-S2194 that somehow lost its audio driver. He worked week last and then this week his party.

  I uninstalled and reinstalled as the help and support on the computer Center said to do, but to no avail.

  I have also re-uploaded the driver on the Toshiba site and he says always "No. Audio Driver" or pop up this error message "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».

  I have no idea why I can't get the sound to work.
  It says downloading, but when I go back it shows an error.

  Anyone with a few useful insite would be much appreciated.

  Thanks in advance :)

  Hello

  I don't have any idea of what windows operating system you have, but it is a series of Toshiba laptops, we and the necessary drivers are located on the Toshiba U.S. page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Here you can download the latest version of the driver.

  In addition, I recommend the deletion of the soundcard from the Device Manager and restart the laptop. If the audio driver has previously been installed correctly then the Windows operating system should recognize the sound card again and the sound should work.

  PS: If you are using Win XP then you need to install SP3 * _avant_ * you need to install the sound card driver

• Re: Networking on Satellite A105

  I have a Satellite A105 that I m trying to fix for a friend. It is currently not possible to use a network connection, I tried Windows and Linux and I ve replaced the wireless card.
  None have worked.

  Any ideas?

  Hello

  What operating system do you use?
  You have a problem with LAN, WLAN or both?

• Satellite A105-S2194 acknowledges that half of the installed RAM.

  Hello

  I have a Satellite A105-S2194 I bought in January 2007 from Walmart. It came with a single stick of PC - 4200 512 MB of RAM. Later this year, I bought a 1 GB of RAM PC-4200 (Crucial memory) key, so it has been read 1.5 G since then. Last week, I bought another stick of 1 GB of RAM (Kingston), which is PC-5300. Today, I installed the second stick, and when I started, it shows only 1 GB of memory in the BIOS and Ubuntu.

  If I take one of the sticks out (any), then it also shows 1 GB. This isn't a case of the PC-5300 is not not retro-compatible.

  Then I have three questions.

  1 is actually able to give me 2 (as advertised in different memory online configurators) GB the laptop?
  2. the fact that I mix PC-4200 and PC-5300 the reason why it does not show 2 GB now?
  3. If it's the fact that I mix speeds, should I buy another PC-4200 (which was originally installed) or another PC-5300 (I'm leaning toward the 5300, since that would mean only two brand new sticks as opposed to one that is 4 years old and a brand new).

  Thanks, and have a great day :)
  Patrick.

  In your case the problem is compatibility.

  Please visit THIS page and clck on detailed specifications. You will find all necessary information on your laptop and also part of the compatible memory modules number al.

  My answers to your questions:
  # Yes.
  # Probably
  # Use two modules with the same specifications. (PC-4200)