Satellite A105 - unable to connect to the wireless router more

I had the success of connection to a router Wireless Linksys for the last few months. Today, that I couldn't connect to the Linksys still another. A few times I have to connect to the Linksys router, but I got a weak signal so I would be disconnected. The green bars on the router Linksys under available networks are all solid green full bars, but I can't? t connect.

To do or check to login once more?
Thank you

HM, you will need to do some research! What was the last you´ve installed applications? Installed new drivers/tools/software on your computer?
If not you already installed the latest drivers for the chip wireless for your laptop? If not already done, then try it and Don t forget to update BIOS. :)

If anything brought success then just to give a few comments. :)

Welcome them

Tags: Toshiba

Similar Questions

  • Unable to connect to the wireless router

    I can't connect to my wireless router.  My PC shows that the router has an excellent signal strength. The password is correct, but it will not connect.  What Miss me.

    Moved from Explorwer Internet

    Original title: wireless network device network Ethernet network router

    Hi Trisha,

    Many routers need firmware updates to work with Windows 7. Maybe it's the issue.

    Please answer these questions:

    1. What is the brand and model of the router?
    2. If it works much earlier?
    3. Any changes made to the computer before the show?
    4. What is the exact error message received when you try to connect to the router?

    I suggest you try the steps from the following link:

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:

    Set up a wireless router

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

    Setting up a wireless router
    http://resource.Dlink.com/connect/setting-up-wireless-router/

    Post back with the State of the question.

  • Satellite L300 - unable to connect to the wireless network

    I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

    The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
    However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

    I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
    The strange thing is that my L300 CAN connect to a wireless network, but not mine!

    And my wireless network works as I can connect from my HP laptop.
    On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

    Any help would be appreciated.

    Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

    Test it with standard B on both devices.
    I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
    I really thing all is due to wrong WLAN settings.

    Play around with that sort of thing.

  • Satellite P200 - unable to connect to the WLAN router

    I have a Satellite P200 and that you have upgraded from Vista to Windows 7.

    The wireless is working and to see available networks, but trying to connect it does not ask the WEP key, it just says: he has a connection problem and (possibly) says that it cannot connect.

    Someone at - it clues on this?

    Thank you.

    Hello!

    It's really strange Mavourneen. I also have Windows 7 on my Toshiba laptop, but I put t have problems to connect to my router WLAN. Everything works fine on it.

    Can I ask you if you tried to update the driver WLAN? You can download the latest version here:
    http://APS2.toshiba-tro.de/WLAN/

    Have you tried to update the BIOS?

  • Unable to connect via the wireless router "problem with wireless adapter or access point" _

    Hello

    I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

    The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

    I had help from my internet service provider, the installation correctly the problem not because of the connection.

    I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

    OK, you're my next hope to solve the problem can you HELP Please!

    Hi, JoelbX
    I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
    All the best
    Tring

  • Satellite L500D - unable to connect to the WLAN router

    Hey all,.

    Hoping that someone here will be more help. For some reason, my laptop won't connect to a wireless network today and it was working fine yesterday.
    When I troubleshoot I get: there might be a problem with the wireless network connection card

    I called belkin and the Lady reset our wireless under a new name which we I = didn t need that my roommate who has vista had no problems with his internet. When I connect the cable through my laptop, I have internet

    Now that I see there no button on my phone to activate the wireless it connected always automatically and the led is on.

    Hi Ren,

    In the wireless issues forum, you can find hundreds of discussions on different WLAN problems.
    Did you check that?
    I think that you will find your answer.

    According to your assignment on resets the router I think that it s properly configured. Check the router security options if the SSID is visible and then encryption and password. Also, make sure that the MAC address filtering is not enabled.

  • Unable to connect to the wireless router. No ip address

    Recently, I plugged a Linksys E2000 router to connect two computers for internet access. Computer has access. 2nd computer cannot obtain an ip address. using windows xp sp 3. Technical support was no help.

    Hello

    As a first step put the computer near the router and start with the security off the coast.
    When it works, take it back to the final spot. If it stops then working, then you have a problem of distance.

    In general

    My wireless is not working - http://www.ezlan.net/wireless.html

    Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

    Wireless Security - http://www.ezlan.net/Wireless_Security.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • see the ssid but unable to connect to the wireless router

    I just installed a WRT160N router, I can see the ssid of the network wireless networks but cannot establish a connection with my laptop windows xp or my wify active blackberry...  Could I connect my mac laptop son with no issues... of ideas?

    Thanks for the suggestions, none of them had however.  The solution was to allow the width of the channel must be set to Auto 20 or 40 mhz, selecting only 20 mhz or individually selecting the 40 mhz would not so much my son computer macbook laptop and my IBM thinkpad to connect. But the default configuration which is set would not work. From the manual - yes I have finally checked it...  «Channel width Select Auto if you want that the router to automatically determine the width of the channel proper (20 MHz or 40 MHz) to use, or select 20 MHz only (default) If you want the router to operate Wireless-B and Wireless-G mode only.» For optimal performance, Auto is recommended. »

  • Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

    Original title: Unable to connect to the wireless network

    Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

    I should add that I have tried the solutions of the previous forum on this topic, and none worked.

    Hi Marilynnla,

    Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

    Read this article and follow the steps. Lets see if it helps in any way.

  • HP photosmart 5520 cannot connect to the wireless router

    The printer has worked I went on holiday, and now it will not work. I have run the wireless network test, and it says "hp printer is unable to connect to your wireless router.  The wireless router is connected and works fine.  My hp wireless computer (windows 7) works very well.

    The structural 'found ssid network name' report, said down

    But "current configuration" has shown the SSID

    can anyone offer a fix?

    Help

    colleenmercy

    Hi colleenmercy,

    In the network menu, select default network.  This reset the current network settings and will help you reconnect the printer to the network.  You can use the Wireless Setup Wizard or reinstall the HP software to reconnect.

  • I received a message on my laptop computer that says not able to connect to the wireless router.

    I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.

    I think you have transcribed the number incorrectly.  I think that the article you want is this one: http://support.microsoft.com/kb/871122

  • Satellite C660-1NJ - unable to connect to the wireless network

    Hi guys

    I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

    Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

    I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

    Can someone help will appreciate it greatly!

    Hello

    Are you able to connect to open WLan?
    I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
    Of course, you should only done for testing purposes

    If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

  • Satellite L650 - unable to connect to the public network (has no valid IP address)

    Hello

    Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

    I have visited many forums and did everything, but of no use.

    1. people with disabilities the tcp/ip V6 of the registry.
    2. the DHCP is enabled. With the help of the automatic IP (DHCP)
    3. also tried with a static IP configuration.
    4. uninstalled the antivirus provided with laptop computer (Norton).
    5 disabled the windows firewall.
    6. restored to factory settings.

    I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

    Can someone please give some other suggestions for this problem?

    Hey,.

    Can you connect to your home WIFI router correctly?

    If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

    What you can try is updated WLAN driver from Toshiba's official website:
    http://APS2.toshiba-tro.de/WLAN/

    If it doesn't work, ask the person contact I mentioned.

  • Map Wi - Fi on Satellite L40 does not connect to the wireless network

    Hello

    I have Satellite L40-15B with a realtek RTL8187Bcard. Problem is I Don t get a connection on wifi, but everything seems ok. I ve installed the BIOS update, the latest drivers and updates for Vista. Psychic Network is turned on, network switch is on, and yesterday everything worked fine. I had this problem too when I bought the laptop but thought that I solved it. Not!

    Vista tells me that everything is installed and works well. I can also see some available networks, but when I try to connect it just doesn't work.

    Someone at - it an idea what to do next? (by the way the network is ok other laptop computer wifi works fine)

    Thank you

    Albert

    Hello

    Your wireless network card seems to be properly recognized in Device Manager. And the problem is that you are not able to connect to the WLan router. Am I wrong?

    Have you tried to disable the Wlan encryption settings and then test the WiFi connection?
    You should also try to reset the settings of the Wlan router.
    Sometimes it helps.

    I got a WLan connection problem too I've checked everything twice and nothing worked Finally I reset the Wlan router. and surprise, surprise it's a key

  • Satellite Pro 6100 - unable to connect to the WLAN router

    Hello

    I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro loaded.

    I can't connect to my wireless router. The switch is in the correct position.

    I want to change to XP using the key provided with the new laptop (dual OS) however I can't reformat using a XP disc at the start up or if I use the recovery cd (start with holding C and let go when he works up) it starts but displays 'specification drive not valid' three times and charges Win2000.

    Can someone advise how (or if!) Can I reformat I want?

    Any help will be greatly appreciated.
    See you soon.

    Are you sure that the wireless network adapter has been installed in the laptop?
    Check in Device Manager

    On some series WLan is optional. This means that the WLan card is not installed, but it is possible to install an and, consequently, the laptop contains the WLan switch.

Maybe you are looking for