Satellite A110 - SD card reader - error message code 10 this device cannot start

Similar Questions

• DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

  My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• In Device Manager it says code 10 - this device cannot start (read message)

  In Device Manager next to the icon for pioneer DVD - RW DVR-K17A Device, it has a yellow! triangle and when I click on it, it says this device cannot start code 10. I received the laptop in June and had not noticed the problem til now. When I followed the instructions for possbily install updated drivers/software I did but said that I am up to date.
  Thank you

  First of all: what kind of machine do you have and what operating system is installed on your laptop? Without this information, no one would be able to help you.

  Regarding your problem: I could check this site-> http://support.microsoft.com/kb/943104/ or check this document-> http://support.microsoft.com/?scid=kb%3Ben-us%3B314060&x=12&y=13 (I know, is not the error code of your question, but you can try anyway :))

  Greetings

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Standard VGA graphics card (this device cannot start. (Code 10))

  Hello

  I have a HP Pavilion dv7-6c73ca laptop 2.2 GHz 2nd generation Intel Core i7-2670QM processor with Turbo Boost technology up to 3.1 GHz... Running Microsoft Windows 7 home edition 64-bit.

  The Standard VGA graphics card gives me this error message: this device cannot start. (Code 10)

  Where can I find the driver for it?

  Thank you all in advance

  Hello:

  This should be the driver for your video card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102011-1&cc=ca&DLC=en&LC=en&os=4063&Product=5218622&sw_lang=

  Paul

• Installation of driver with PXI-8360 error "this device cannot start - Code 10"

  While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

  Thank you

  Manu

  Sounds great Manu,

  I also followed on that for you, then you should be getting approval sometimes today.

  I hope for the best

• Why won't my CD/DVD Slymtype player work, error: this device cannot start. (Code 10).

  Original title: why not my job as a player of DVD/CD of Slymtype at all?
  Here's what I have:

  SlimType DVD C DS24CZP ATA Device

  Windows Vista Home Basic

  Acer aspire 3680 series
  ------------------------------------------
  So here's my problem:

  Recently, I put a DVD disc into the drive. Then, once I closed it, it started to turn, then what sounds like a sound signal, spining, beeps several times, and this will be repeated for a few minutes. Once it stopped, it does nothing. You can not even here it spining. No AutoPlay starts, none Open box, nothing at ALL. The computer doesn't even recognize that there is a DVD in there.

  So, I advanced and found in the Device Manager. The picture showed it was a disc with a CD on top (representing is a DVD/CD player) and in front of it, there was a «!» So I opened the information for it. Here's what he said:

  "This device cannot start. (Code 10) »

  When I try to make windows to search for a solution, it came not with something. I tried to update the driver; no effect. Tried neutralizing him and he the reactivation. No effect. Tried unistalling and restart my computer. When he tries to install it, it fails.

  So now, I did everything I know. Does anyone know how to fix this without having to replace the drive itself? Or should I replace it?

  Thanks in advance!

  Hello

  Did you do changes on the computer before the show?

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Method 1:
  You can perform the steps in knowledge base article and check:
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Method 2:
  You can also visit the links:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

• Get a Code 10 error "this device cannot start' for my optical drive

  Hello

  I am running a Dell Studio 540 with the following specifications:

  Processor: Intel Q6600 @ 2.4 GHz

  RAM: 4 GB

  HD: 750 GB 7200 RPM SATA

  Graphics card: nVidia 9800GT 512MB

  OS: Windows Vista Home Premium 32-bit

  All the drivers and BIOS are up-to-date.

  My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:

  This device cannot start. (Code 10)

  Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".

  I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.

  Any help would be greatly appreciated.

  Thank you for your time,

  Donald Lundie

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/

  You can run the fix in the below article data and check if this is useful.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network cards - "this device cannot start." (Code 10)

  I recently bought a new video card and in order to make it work, I got my BIOS and motherboard software updated (v9 to v20, a huge leap that I've apparently updated in 2012). After the update my new graphics card worked perfectly, but I ran into a problem with my network card.

  At the start, my internet connection is broken. When I access the Device Manager, it shows me that network cards, specifically my Intel 82579LM Gigabit Network Connection has an alert, and the message is: "this device cannot start. (Code 10) ». Now, if I reboot either OR I right-click on Intel 82579LM Gigabit network connection, and then select Properties > advanced > value and select "Automatic Detection" or "Force Master Mode" it resets and I have access to the internet (at least until the next time I turn on my PC and there is no need to repeat the process). If I try this again, it breaks and I need to restart.

  I guess I have to reinstall my drivers and to this end, I visited the site Web of Gigabit and downloaded PROWinx64.exe (as I am running Windows 7 64 - bit). However, I am reluctant to run where it worsens the situation. So I thought that I check first with the experts and make sure that I took the right course of action.

  Please download this app (minitoolbox)
  Run it with 'select all' checked
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• Cannot access the he DVD drive in Windows Vista. Error: This device cannot start. (Code 10)

  All of a sudden my DVD drive has stopped working. Windows Vista SP2 doesn't see it, but I can see it in the BIOS.
  Error: This device cannot start. (Code 10)
  The driver has the exclamation point. I uninstalled the driver and restarted the PC, but the system does not re - install.
  The exclamation point is up there.

  Help, please

  Thank you

  Hello

  This article can help...

  http://support.Microsoft.com/kb/314060

  Tricky

• My sound card does not work after working yesterday. "This device cannot start. (Code 10) »

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  OZNalex wrote:

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  Hello

  First do a hard reset.

  Please go through this Hotfix from Microsoft for the error you are getting.

  Please uninstall & update audio driver & BIOS after checking, you have such version specified in the site pilot here on the website of the HP product . Reboot after that. Do the troubleshooting in the Microsoft Fix document.

  When you're done, shut down the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key ESC that you start the computer to launch the Start Menu, and then select F10 to open the BIOS menu.  Press F5 to load the default values (sometimes it's F9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press F10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Check if its working

  Thank you

• We get an error "this device cannot start" Code 10 on Windows 7.

  Original title: USB not recognized verified work storage device

  I have a 8 GB USB Flash drive that has, until recently, worked perfectly on several OSes including Windows 7 and 8. Recently, the player does not seem to want to work on one of my installations of Windows 7 on a PC (HP EliteBook 8470p).

  I tried to reinstall the drivers for it on my machine specific windows 7 that does not work on. Device Manager gives me "this device cannot start. (Code 10) "even after reinstalling the drivers and reboot several times. I use also some virtual machines in Windows 7 and 8 on the same PC, and when connecting virtually the USB key to the virtual machine to Windows 7, I can't detect it. When you connect the device to the virtual machine from Windows 8, I can access the files and even format, so the USB ports on my computer are all functional.

  To summarize, the device works in Windows 7 and 8 separate facilities of this computer, but does not work on 7 on my TI, if the main or virtualized operating system. The VM of Windows 8 on this computer can recognize the device.

  Thanks for the answer, except that I discovered the problem. I checked upward in the disk management window, and I saw that the reader, for some reason, was not assigned a letter. After you manually assign the drive letter, all data on the disc is now available. Thanks anyway.

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers