Satellite A130/135 completely stopped working

Similar Questions

• Satellite A130/135 dies when the power adapter is connected

  Yesterday, my laptop satellite A130/135 completely dead in use.
  Even the lights indicating that the laptop is plugged into the custom of light.

  I read today that by removing the battery, hold the power button and place the battery back in place, I could get the laptop to turn it.
  It worked, but after that my battery is low I plugged my power adapter and the laptop is returned to its State does not.

  So now I have a limited amount of battery power and it does not load.
  Yes, what's wrong with my computer laptop/battery/adapter

  How can I solve this problem?

  Hello

  I found your other thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=143840

  It seems that the problem might be related to the hardware failure and all you can do is contact the ASP in your country.
  I put really know what might cause this problem but I think it could be something wrong with the motherboard

  To check the device by a technician of ASP.

• Satellite P300D - 21K - Sound completely stopped working

  Hello

  I used my P300D - 21K with no problems for a few weeks now. But today the sound completely stopped working on the laptop. It seems that there is laptop thinks it is running through it, like the sound level meter, the exit bar is pulsated up and down that I play a sound track.

  Any ideas?

  I got a message saying "Error in creation of the sound buffer winamp 8878006 error code" but it was after I had lost the sound.

  Have you checked the Device Manager? The sound card is correctly recognized?

  Maybe you should try to update the audio driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Did you check if the sound is muted only? You can do this with FN + ESC.
  Check it!

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Touchpad has completely stopped working

  Hey, my touchpad completely stopped working. I tried to download the driver and restart and the stuff, but nothing seems to work. There was formerly an icon for it down to the right on the toolbar, but that's even more here, it's like the software so that it just doesn't even exist anymore.

  Can anyone suggest a solution please?
  Thank you

  Hello!

  You can disable and enable the touchpad with FN + F9. Select this check box, because maybe it s disabled.

  Have you tested an external mouse? You have the same problem with it?

  Good bye

• W700 wake from sleep or standby long, paved model touch completely stop working

  After having used the w700 less than a week, I found another problem on the laptop.

  I'm not sure it's a problem hardware or software, if someone has the same experience as me.

  Please give me some advice: is it a common problem or what else?

  A moment where the operating system, close the form or click sleep or hibernate with touchpad (touchpad with shifts two keys are completely work now).

  Re-open the screen, laptop alarm, the touchpad, including down to the left and right keys then completely stop working right now. I have to use three other buttons above the touch pad with red dot to restart the computer.

  After restart it completely, the touchpad with two down keys working again.

  Very strange, is there some sort can help me solve the problem?  Thanks for your reply.

  Try to uninstall the scanner activity monitor if it is installed.

• Media Player has completely stopped working

  My media player has completely stopped working

  System-Windows 7

  All media is still listed, but nothing is available.

  When I try to start, the following message appears.

  "running the server failed.

  Hello

  Have you recently installed another player?

  Make sure that WMP is not already loaded. Right-click on taskbar - Task Manager - tab - process
  Search for wmplayer.exe - to COMPLETE the PROCESS in this regard.

  -------------------------------------------------

  Make sure that Windows Media Player is on.

  How to enable or disable the features of Windows 7
  http://www.SevenForums.com/tutorials/5023-Windows-features-turn-off.html

  How to uninstall and re-install Windows Media Player 12 (WMP12) in Windows 7
  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

  -------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ---------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  -----------------------------------------------------------------

  Microsoft Fixit Center
  https://Support2.Microsoft.com/FixIt/en-us?WA=wsignin1.0

  Support for technical problems of Windows Media Player
  http://support.Microsoft.com/ph/7763#TAB0

  Troubleshooting Windows Media Player Guide
  http://www.SevenForums.com/tutorials/57348-Windows-Media-Player-troubleshooting-guide.html?LTR=W

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  .

• Satellite A200 completely stop working

  Hello!

  I have a big problem: I have this 2 years computer laptop satellite A200 myself and last month, he began to stop working when I run an application, he simply spend some time and I can't move the pointer of the same mouse the keyboard and the current application were all stop working for almost an hour.

  So what I did is to hold the button walk / stop and after a few seconds, I did it again. Last week several same problem and same thing, I did, but now he began to black from the LCD screen and sometimes all could start. Thinking that the problem is on the BONE I changed from VISTA to XP, but then the same problem occurs.

  Please help a lot me... thanks and Goodbless.

  You will not fix anything using the "Memtest86 but this tool would test your RAM modules."
  If something would be wrong with a RAM then this utility detects an error and it would mean that a RAM replacement is necessary.

• Re: Satellite P850 - 12 X completely stopped working

  I can't give info much more than that, but my computer has just stopped working.

  I had owned the PC for less 2 hours, but while I was installing some programs the computer will just empty. It seems to be quite dead.

  It fails to turn on, the light indicating it is connected is not yet lit.

  I have no idea what could be wrong or what caused it to stop just but it is rather relative. The only thing I can say is he was running rather hot, I never expected to get so hot, but I assumed it was normal given the processor, it is running.

  An hour after initially breaks I tried to turn it on again, but nothing helped. Does anyone have and suggestions/recommendations for my next course of action?

  Post edited by: aclarke91

  Change P850-12Z P850-12 x

  You are right. Ask for the replacement of the laptop. I hope that you will get a new.

• Satellite C855 - speakers suddenly stopped working

  I have a Satellite C855-1J2 running Windows 7 Edition Home Premium SP1. I turned on December 21, 2012 and installed five applications - the latest versions of Firefox, CeltX, Notepad ++, Open Office and Microsoft Security Essentials (I removed McAfee). I have the latest Windows. Since then I have not installed other applications.

  Three days later, my laptop was working fine until, suddenly, that the speakers stopped working. I can identify the specific incident that caused it. I connected a pair of perfectly ordinary headphones using the standard headphone jack, power the laptop off, after that I was done listening but headphones plugged on the left.

  When I turned on the laptop back the next day, no sound came in headphones.
  When I unplugged them, no sound came from the speakers.
  I rebooted my machine and the speakers worked fine.

  However, I am now in a situation where whenever I turn on my laptop, the speakers do not work and they will work again when I restart then. A little investigation of this problem shows the following...

  Whenever I turn on my laptop and go to control panel-> hardware and sound-> manage Audio devices I see two items:

  (1) ' - high definition Audio Device - speakers not plugged"with a speaker greyed out icon with a red arrow.

  (2) "audio digital (S/PDIF) - high definition Audio Device - default device" with a colored external amplifier icon (it looks a bit like a DVD player) with a green check mark. There is an icon of audio level next to him that shows sound whenever the sound is played on my laptop, but no sound is audible, either through my speakers or headphones.

  Whenever I then reboot my laptop and go to control panel-> hardware and sound-> manage Audio devices I can see an article:
  "Speakers - Realtek High Definition Audio - Default Device" with a colorful speaker and a green arrow icon. The sound works perfectly well.

  I already looked online and the Toshiba forums for a solution to this, but while I found lots of people with similar problems of speaker with Toshiba Satellite laptops, I have not found a solution (and when I say something, I mean something a little more useful that "have you tried completely reinstalling your operating system') so this thread.

  Even if a reboot is currently to solve my problem, I obviously shouldn't have to restart my machine at all in order to get something as simple as his, so my questions are:
  (1) what is the cause of this problem - in other words, why what is happening?
  (2) what is the Toshiba solution to this problem?

  Thank you very much.

  Hello

  It seems to me that the issue you described above that the speakers would not be chosen as device by default, but the Audio Digital (S/PDIF).
  Somehow the audio driver cannot detect the first initialization of the system speakers.

  I don't know why this happened but I have two proposals:

  (* 1) * uninstall the audio driver from the system. Download the driver from his most recent of the Toshiba page and install it after restarting the laptop first.

  (* 2) * if installing the audio driver is not enough, the last resort would be the recovery of the system.

  (> 2) what is the Toshiba solution to this problem?
  If you want to get a recommendation of Toshiba, I would give advice to connect with people. It is the community of users.

• Because I installed a Satellite L300 printing software stopped working

  Hello!

  I'm new here so not sure if I'm posting in the right place. Mods, please do not hesitate to go to the relevant section, thank you.

  OK, I have a Toshiba Satellite L300 laptop and since I installed a printing software Wednesday evening, my laptop suddenly stopped working!

  Since Thursday night, I tried to make it work, but I am faced with this message:

  When I load up, it goes to Windows error recovery:

  "windows does not start.a recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.if power was interrupted during startup, choose start windows normally"

  then it gives two options: Launch Startup Repair (recommended)
  Start windows normally
  ==========
  -then I click on (recommended) launch Startup Repair
  -then a scren called load' system recovery options «...» It is said: select an operating system to repair, click next.only windows vista listed operating systems and can be repaired

  If you do not see your operating system listed, click load drivers to load the drivers for your hard disks...

  but nothing comes up so I click load drivers and it gives me just loads of records at random... and I don't have any idea those to load
  ========
  5 years report an abuse
  Additional details
  so I click "next".
  ========
  Then, I have 5 options:
  -Startup Repair
  -system restore
  -windows complete pc restore
  -windows memory diagnostic tool
  -command prompt
  ==========
  Startup Repair says that manually, it can't solve any problems

  -simply said system restore your computer is located in a limited State, and this action can not be changed... but there is no option to do so

  -restoration of windows complete pc says I need to insert a backup disk which I do not have

  diagnostic tool memory Windows says that windows blocks it
  ============
  but on restoring system it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
  but I don't no where... I typed in the command prompt, but don't understand how to use it
  =========
  I also tried to click Start windows normally, but it won't work

  If the problem is the software installed, start Notepad in safe mode and try to start restoring the system from there.
  Please let me know what options are available. Can roll you back OS a few days back?
  Are some that are listed restore points?

• Satellite C650 noise has stopped working

  I had my laptop for about 6 months and have had no problems with the sound so far.

  I recently did a windows update and a few hours after my sound has stopped working completely.
  I updated the driver (Conexant chip Cx20671 hd audio) after having failed, I uninstalled and reinstalled the driver off toshiba downloads, after restarting again no sound.

  When I have media player, the sound engineer acknowledges there is something to play, but there is no sound coming out of speakers

  _ * Please can someone help! *_

  Hi mate

  > When I have media player, the sound engineer acknowledges there is something to play, but there is no sound coming out of speakers

  Just a question: have you checked if the sound is not muted?
  Please press FN + ESC to activate or deactivate mute.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro L500 - Webcam stopped working

  The Web camera integrated on my Satellite Pro L500 stopped working with the following message:
  C:\Program Files (x 86) \Toshiba\Toshiba Web Camera Application\TWebCamera.exe

  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.
  The event log points to microsoft.vc80.openMP.

  Could someone tell me please how to fix the web camera. I use it very rarely, so I don't know exactly when it has stopped working.
  Thank you.

  Hey,.

  What do you think about reinstalling the webcam software? Maybe it will work

  Please see the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Just search your laptop model and the available downloads. If you find it, download the new Camera Assistant Software but before you install it, first remove the old version and restart your computer.