Satellite A130/135 dies when the power adapter is connected

Yesterday, my laptop satellite A130/135 completely dead in use.
Even the lights indicating that the laptop is plugged into the custom of light.

I read today that by removing the battery, hold the power button and place the battery back in place, I could get the laptop to turn it.
It worked, but after that my battery is low I plugged my power adapter and the laptop is returned to its State does not.

So now I have a limited amount of battery power and it does not load.
Yes, what's wrong with my computer laptop/battery/adapter

How can I solve this problem?

Hello

I found your other thread:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=143840

It seems that the problem might be related to the hardware failure and all you can do is contact the ASP in your country.
I put really know what might cause this problem but I think it could be something wrong with the motherboard

To check the device by a technician of ASP.

Tags: Toshiba

Similar Questions

  • Satellite Pro L20: battery not charge when the power adapter is connected

    Hello

    all advice appreciated.

    I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

    There are two recent occurrences that coincide with this problem, I try to eliminate:

    1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

    2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

    I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

    I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

    see you soon
    Chris

    First, please check if the other are lit.
    If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

    > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
    If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

    So I really don t see any problems with the charge process.

    Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

  • Computer HP laptop goes black when the power adapter is connected

    Hello, g ' Day

    I have a HP Envy Sleekbook m6 and just today I realized after plugging in the power adapter tge screen woul go completely black. I can hear the cell phone still in market, but I don't see anything. If I play music until the screen goes black, it stops. I tried to change the power plan to see if that would settle the matter, but it does not work. Is there a way I can fix this?

    Thank you in advance.

    Hi jessiecornwall,

    Thank you for the information. I suggest you go to Device Manager and right click on your graphics card and update was from there. Here is a document of Manager of devices for Windows 8 information which has steps for the error codes you get.

    I am also including this document for an Overview of the switchable graphics or Dual GPU that explains what they are and how they work.

    I hope that this information help, please let me know how it goes.

    Thanks and good luck!

  • Trackpad and usb mouse stop temporarily when the power adapter is connected

    It is a very weird, crazy question. It began to happen today.

    Introduction: I installed ubuntu since 2008 in this laptop from version 8, now I installed 11.04. My brother has the same problem since a month there is around. It has the same model of laptop (DV9000 HP), but Windows Vista computer.

    The problem: mouse freeze random by 1 or 2 seconds, the two mouse pad and usb mouse attached. When I unplug the AC adapter, mouse works well immediately.

    Indices: I forgot my adapter in my apartment this week, and I got my brother to work here (the House of my parents). And another hint, I used a power adapter for cars, today give it a 19, 7V instead 18, original 5V AC adapter. My brother also use this car adapter.

    Hey, try to get the other original AC adapter. My laptop has become normal when I got my power adapter. See me first post

  • Satellite A300 stops when the power adapter is connected

    Hello!

    Yesterday, I bought a new Satellite A300. I plugged it in, worked some time with her and then I decided to stop it while it was plugged.
    The computer has stopped working, but in a few seconds, he started alone.

    I tried to do it while it was disconnected and there is no problem, but when it is plugged the problem persists.
    I would be happy if someone can help me!

    Thank you very much!

    I would try a BIOS update. You can download it here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Satellite L655 - questions turn on when the power adapter is unplugged

    Hello

    I have a problem with my new Satellite L655. When the power adapter is disconnected and wireless is disabled, the laptop can turn on for less than a second turn it off again. OR turn 'power' and 'Wireless' turns on, but black screen and hd light; After startup bios of 30-40 seconds, the wireless light turns off and hd lights; OR turn on normally;

    Toshiba has changed the motherboard a few days ago, but the problem persists. Update BIOS. My laptop is the only one affected

    Thank you in advance,
    Maurizio.

    Hey Buddy,

    > Toshiba has changed the motherboard a few days ago, but the problem persists
    So have you contacted already technicians again? You must tell them that the problem is still not resolved and it must be another reason for this problem. Then get in touch with technicians again to clarify this issue.

    Have you connected external devices while laptop is turned off?
    -Online if yes remove each of them.

    Load default settings in the BIOS?
    -Online if it is not this. Enter in the BIOS, and then press the F9 key to load defaults.

    Otherwise, it would be time to service as I have already written. It must be a nuisance material

  • His acute appears when the power adapter is plugged into satellite

    Hello

    My laptop is four days old, but when I use it and the power adapter is connected and provide electricity, a steep, low sound volume is issued from the fan area. When I remove the adapter it disappears usually, but sometimes intermittently returns in the form of a stuttering occasional, typically when I use many processor programs.

    I also noticed that, if the sound is not present and yet I increase the brightness of the screen in the properties of the TOSHIBA power saver, he'll be back with a vengeance. In addition, the power supply makes the same buzz, but at least I can sit several feet from it.

    Can someone therefore please tell me if this buzz / your electronic is normal, or if there is something I can do to prevent it being issued?

    Thanks for any help.

    [email protected]

    Hello

    I think you should contact your dealer / ASP with this problem. It seems to me that there is some sort of component inside the PC that generates this noise when the processor speed is high.
    Also if the power adapter is buzzing, you must show this to them as well.

    It does not seem right that the unit should behave like that.

    BR

    Tom

  • Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

    I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

    I have read several other posts on other sites with people having similar problems.

    There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

    Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

    Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

    Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

    Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

    When I unplug my power as well the battery seems last mabye 5 minutes at the most.

    Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

    If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

    Concerning
    Florence

    Hmmmmm... interesting.

  • Satellite Pro L500 - stops when the power cord removed

    Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

    Someone please help. I have not installed anything new.

    Hey,.

    For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

    I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

    You can find a list of all FSA here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

    The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

    Original title: clear the display

    Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

    Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

    You can now close the Power Options pane when you return.

  • Satellite A300 may depend on from when the power adapter plugged

    Hello

    I have a problem with my Toshiba Satellite A300 when the laptop is connected to the power adapter I have no possibility to turn it on, it's only 2-3 seconds once it comes down.
    When Toshiba is enabled with the battery power and I tried to connect the adapter it also goes down.
    I have no problem with the charge itself, but only with working with AC adapter.

    Please help me what can I do with this problem, does anyone has similar problem?

    Hello!

    For me it sounds like a hardware failure of the motherboard if the AC/DC adapter is plugged and the laptop is turned on

    I don't know but how best to m would be if you go to the authorized service provider nearest with the AC/DC adapter. Technicians can check your laptop and swap the motherboard if it of really necessary. The guys are very friendly and helpful!

    Here, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • HP Pavilion 6500 goes out when the power adapter plugged

    My Pavilion 6500 (specifically dv6623cl) turns off when I plug in the power adapter. If I plug it in, then turn on the laptop, it automaticly turns off before loading windows. If the laptop is already started, and I can plug the power adapter, it immediately turns off. I can charge the battery without any problem, also while the laptop is turned off, but as soon as I turn it on with the adapter plugged it stops, I checked the battery through HP battery check and he said its good, he is holder of a charge very well and everything, the only change made to the laptop hardware wise was an upgrade memory I had no such problems until the upgrade of memory, but I do not see how it would affect the power on the aspect, in order to make a system restore, if ever, I need, the poweradapter must be plugged and theres other system functions that require the adapter complete, it is a question that must be corrected

    any ideads what the problem would be?

    any help is much appreciate

    Thank you, rayandmaura

    Talk to a jury of uselles / forum, do those who seek info on how to reset / bypass the bios password on their (or anyone elses) computer or something as it gets 20 pages of answers, but asking a power / card issue and your luck if you get a response at all,

    I'll just give up to deal with this useless community and just buy 3 extra batteries and remind all of the accused

  • Satellite A300 stops when the power adapter cable

    Hi people

    When I connect the power cable for my toshiba satellite a300, it stops immediately. I can use it on battery normally without any problems.
    When I boot in safe mode, it works fine without any problems with the AC adapter plugged into the laptop.
    Operating system is Windows Vista
    What is the reason? What can I do to fix this?

    Thank you

    Can you use it for laptop with AC power only when the battery is removed?
    If so, boot up your laptop and when the operating system is loaded to put battery inside, wait a few minutes and disconnect the power supply.
    Plug it in again and let us know if the same thing will happen again.

  • Satellite L20: Strange noise from heat sink when the power adapter is purchased

    Hello

    I own a Satellite L20 laptop and when I take the power cord out of my L20 and power to the battery on a strange sound high tone appears when I put my ear on the heat sink and can be heard normally.

    It is never used to do this.
    Any ideas?

    I don't know if you can hear the sound, as I do, when to do as you described, but this noise is coming from the CPU, when your phone is inactive or sous-travaille.

    Have it on my computer Toshiba no as well and everything I read that there is nothing to worry about and normally, you does not recognize.

  • Satellite P205: Touchpad does not work when the new adapter is connected

    I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

    -Does not load properly and turns off after an hour.
    -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
    -Charger Word to say the laptop plugged in but not charging

    What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

    See you soon!

    Hello

    I guess that the touchpad worked correctly in the past with the former sector adapter.
    Is this good?

    Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

    Check the AC adapter s old part number and if the issues could be resolved using this adapter.

Maybe you are looking for

  • How to boot from USB FD in HP Pavilion Sleekbook 14-b035tx

    How to boot from a flash drive? I pressed F10 and go into the BIOS menu > System Configuration > start, in the start options Options, I have not found my flash drive...

  • Cannot reset the home page

    I tried to reset my home page with Internet Options, but the area that is shaded and a message at the bottom of the dialog box shows some settings are managed by your administrator. Problem is my computer is a stand-alone system, not in any network c

  • Printer will no longer work on this computer.

    I oversee a lab with 12 computers in a main centre.  A unit running vista will not be printed.  He says its printing but nothing happens.  This device used to work great.  The printer works fine on XP units.  Printers has changed, not different.  Uni

  • HFM ON LINUX

    I created the oracle of 6.5 vm linux server. I installed the linux essbase, planning, hfm and property reports, it works well. but when I open the application HFM its display errorHFM application created successfully.

  • Is there something like a broom to "change the hue?

    Can I change the colors of a picture with the Hue/Saturation or the color Balance adjustments.  I'd do itWhat to do in a small area of the image, similar to what I can do with the brightness using the tool Burn / Dodge.Is it possible to do?I don't wa