Satellite A20: I can not install the Ethernet controller driver

Similar Questions

• HP Pavilion g6-1310ea: can not find the ethernet controller driver

  I reinstalled Windows on my HP Pavilion g6 - 1310ea and can not find the drivers for the Ethernet, PCI Device and SM Bus controller controller. There seems to be no more this kind of drivers on hp suupp.

  Hello:

  I can't even to the driver page.

  Here are the drivers you must however...

  Ethernet controller: download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device: Download, unzip and run the exe file to install from the first item on the list at the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  SMBus Controller: This is not on the driver page even if it worked...

  I zipped and attached to the driver that you are interested in below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click the controller smbus who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• Satellite A100-773 - how to install the Ethernet controller driver?

  Hello

  I reinstalled Win Xp Prof on my satellite A100 - 773 (PSAA9E) and have a problem with the Ethernet controller. In Device Manager, the controller is marked with a yellow '?'.

  I use this driver http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & selSho rtMod = 444 & language = 17 & selOS = 10 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 12 & electedLanguage s = 17 & type = all & page = 2 & ID = 55434 & DISO = 1 0 & driverLanguage = 42

  Install it on the Device Manager and right click on ethernetcontroller - installation driver. This is the message that no driver is found (in the right! folder) nothing can be installed...

  I also remove ethernet controller, so that windows automatic reseacht for this, but nothing works.

  I don't know what I can do

  PS: Chipset utilities are installed

  Hello

  I can post a link where you can download the driver but I put t know what driver is missing now. Do you mean the WLAN or LAN card? What is the device?

  Please check the vendor and device ID to identify which device needs a driver. Go to Device Manager > right click on Ethernet controller > properties.
  There you should find some information like PCI\VEN_xxxx & DEV_xxxx
  With these codes you can look here to identify the device: http://www.pcidatabase.com/

  After this verification, the page of Toshiba to download a driver.

• Satellite C855 - 12K - can not install the correct display driver

  I have a Satellite C855 - 12K for the Croatian market. Recently, I noticed a loss of performance in games, even on settings low that I used to play normally high or ultra. So I decided to reinstall windows and get the latest drivers.

  All drivers installed correctly the display one, when I install and reboot the system and the laptop BSOD out restores.
  I tried to manually install the driver without any catalyst, but that does not work either.
  NET framework 4.5, directx 11 and vcredist are all installed in front of the pilot.
  Does anyone have an idea what this topic?
  Graphics card is the Radeon HD7610M.

  Update on this:
  I just managed to find the old CCC software (version 2012.0120.420.7502) and it installed fine.
  I am still concerned why the new driver does not work?

  Post edited by: markov

  Hi Markov

  According to the specifications of the laptop this model was delivered without BONES. Can you please tell us what OS you use and don't you try to install the driver on the Toshiba download page?

• I CAN NOT INSTALL THE VGA INTEL DRIVER AND CANNOT ADJUST THE BRIGHTNESS

  I have HP COMPAQ 41 224tx, with windows 7 ultimate 64-bit

  I have just updated to windows 7 32-bit basic family.

  and install all the drivers like ussually, but I can't change my brightness

  and worse, I can not install the vga driver intel.

  because I can install it when I use 32-bit windows

  Please help me

  I'm sorry, my language is bad

  Indonesian IM

  It's weird.

  My last suggestion and I hope it works for you, install the amd driver directly from AMD and see if it works better than the one on the support page and the driver of your PC.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy2&OS=Windows 7-64

  Also, try to install the latest chipset driver and see if that works too.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

• I can't windows 98 to connect to the net and I can not install the ethernet driver to install

  I don't know where start the ethernet card I have windows 98 can not install without a driver updated, I can't find a driver that I can towards the down loaded to an open disk and run winzip does not open on a disc and it wont let me install where it is help

  Hello

  Visit the following links to learn more about support for the Windows 98 operating system information.

  http://support.Microsoft.com/ph/1139

  http://www.Microsoft.com/Windows/support/endofsupport.mspx

  http://support.Microsoft.com/GP/lifean18

• Satellite C660-117 - where to download the Ethernet controller driver?

  Hello.

  Can someone please help with my laptop? Here's my laptop specs:
  Model: Toshiba Satellite C660-117
  Part number: PSCOLE-00Y00JEN
  Serial number: XA458343K

  I have just rewiped my laptop with Windows 7 Ultimate. I use the laptop on a wireless connection. In Device Manager, I have an exclamation mark next to the Ethernet controller. This prevents me from going online.

  Can someone direct me please the link to download some driver I need?

  Thank you much much in advance.

  Dennis.

  Hey Buddy,

  Controller driver Ethernet can be both: WLAN or LAN card. All the drivers and tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed Windows 7 Ultimate, but may I ask why you haven t used the Toshiba with Windows 7 Home Premium recovery disc? On this disc are all the drivers and tools are installed because it s a picture of factory for you don t have stress with driver and installation tool.

• Can not find the network controller driver please help

  Hi, I just did a full erase and reinstall and I can't find my network controller driver, I installed about 50 of them, read many messages, I've tried everything that someone please help...

  Windows 7 Ultimate x 64
  G6-1c40ca
  PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C & REV_01
  PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C
  PCI\VEN_14E4 & DEV_4747 & CC_028000
  PCI\VEN_14E4 & DEV_4747 & CC_0280

  This should be the driver Broadcom wireless lan to your laptop.

  Best regards

  ERICO

• Equium M50 164: cannot install the Ethernet controller driver

  My laptop was recently formatted and everything is back to normal except the DSL; Device Manager displays a yellow exclamation mark on Ethernet controller.

  I tried to find a suitable and closest driver, I had was Equium M series PSM59 (5.621.628.2004). I have downloaded and run the installation, but the yellow exclamation point is always there - even if I uninstall the driver and restart the installation. I get the message "new hardware found" and the installation wizard appears. But when I try to refer to the specific location for the driver, it says driver not found.

  What is the correct driver for the machine? If not, what is it and what is the address of the site? And I do it the right way?

  Thank you

  Fauzan

  Hello!

  Satellite A50-164 belongs to the series of PSM57E, not the PSM59 series that you have posted.

  In order to check the Toshiba website for drivers and the controller again missing Ethernet could be the card LAN or WLAN card.
  Make sure you have both installed.

  Good bye

• Satellite M70-122: could not find the network controller driver

  Hello! I can't find a driver. Any body can help me.
  Model M70-122.
  Thank you.

  Hello

  Have you checked the download from Toshiba site for the driver LAN?
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  You must select the Satellite M70 (PSM70) to download the right driver LAN.
  Also try to also install the Wlan driver because this device is certainly the Wlan card.

  Good bye

• Satellite Pro L500D - I can not install the ATI from Toshiba page display driver

  I reinstalled Windows 7 Home Premium 64-bit.
  No, I have the problem, I can not install the Ati (HD 4100), downloaded displaydriver from Toshiba for my Notebookmodel.

  > Now, I installed the displaydriver of the model Satellite A500d.
  .and? Doing a job?

• Can not install the new update

  Hi, I use windows 8.1.

  My Skype cannot be used at present. Pop message 'the old Skype 7.8 version can not be delete' while I install the new version by the message on Skype application.

  I got through all the files and make sure you all relate file has been remove. But I can not install the new version. How can I update the window to desktop?

  Thank you

  Run the following program to remove traces of Skype from your system, which should allow you to reinstall the program:

  http://www.pcdust.com/downloads/SRT/SRT.exe

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows95 CD-ROM - game Need for DCC Speed-No. pieces found - can not install the game - please help. ___

  Windows 95 CD-CD-ROM-game Need for DCC Speed-No. pieces found - can not install the game - please help.

  ------------------

• Can not install the kb2481109 update, see log attached

  Can not install the kb2481109 update, see below

  1.328: 11:36:42.796 24/08/2013 (local)
  1.328: c:\161c59ea6306a628592717476ee96b\update\update.exe (version 6.3.13.0)
  1,344: hotfix started with following command line:
  1,344: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  1515: C:\WINXP\system32\mstscax.dll is present
  1515: condition succeeded to the Presence.RDCInstallBlock.Section section in row 1 prerequisites
  1515: FileVersion C:\WINXP\system32\mstscax.dll is less than 6.0.6001.0
  1515: condition in Test.RDCInstallBlock.Section failed with the fist
  1515: Check condition for line 2 of prerequisite returned FALSE
  1515: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  1,515: KB2481109 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  1,562: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  1,562: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  38.890: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  38.890: user input: OK
  38.890: Update.exe extended error code = 0xf0f4
  38.890: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Hi Keith,

  I would have you look at the article-

  http://support.Microsoft.com/kb/958051#top

  http://support.Microsoft.com/kb/883824

  http://support.Microsoft.com/kb/822798#top

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Make sure that you back up the data on the computer before you continue.

  Thank you.