Satellite A200-09V - card Wifi detected but never connected

Hi all!

First of all, sorry for my English... so be cool with me!

I have a Toshiba Satellite A200-09V so I change my router to a DLink with 802.11n. So I buy an internal wireless card but the card is correctly detected, but never whant to be 'connected '.

The original card inside is an Intel 3945ABG.
When I turn on my laptop, on the front of my laptop, I have a little orange light with a switch to cut the card.

The card I buy is an Intel WiFi Link 5100 ABGN. But light, wathever I change the switch ON of OFF, again and always off the coast. Windows detects the card correctly and I install the right driver for intel, and in my equipment manager, the card is in the network card.

But the map never want to get "online"... I can turn the card but I can not connect (so I do not see the wireless near me).

I have the latest bios and driver... but it's like the laptop never 'talk' to the card and by the way, don't get pass the signal.

But why XP detects the card but not get cards online? If the card was bundles, XP will never be able to "detect" the card and if XP correctly detects the card, it's as if the card is compatible with the motherboard? Isn't it?

Thank you for helping be and I give you all the information you want...

The network without WIRE Intel 3945ABG card only does support A, B or G standard and your router has N.

So, you need to set the router to G standard or perhaps, you set up the router again to this standard and without security settings. It's the best way I think, and if it works, you can enable encryption and the security features more.

Tags: Toshiba

Similar Questions

  • Satellite A200 - update card WiFi

    I have Toshiba Satellite A200 - 1 MB PSAE0E with WiFI card 4965AGN.

    I want to change the old WiFi card with Intel N 6300, but when I insert the new card of the laptop does not work, at all. When I go back to the old, all right. What should I do to fix?

    Thanks in advance.

    > What should I do to fix?
    Maybe a stupid comment from me, but noting is broken and cannot be fixed. Problem is hardware compatibility. If some piece of hardware is not compatible, it will not work.

    As far as I know that these improvements are not supported by Toshiba and if you want to have fast WLAN connectivity and the most recent I recommend you use the USB (USB WLAN key) solution.

  • WiFi detected but cannot connect

    I have a Lenovo IdeaPad S10-3 and Windows 7 Starter. I've updated the BIOS, but now I can't connect to wifi plus. The various wifis are detected, they are not protected by word or whatever it is. But I can't connect them.

    The little wifi light on the front Crest is on. I pressed the FN + F5 and makes sure everything is on.

    What can I do?

    Hello and welcome,

    try to reset the router...

    cordially KalvinKlein

  • Satellite M300-D4316 - wireless network detected but cannot connect

    Previously, I could use LAN wireless on my laptop but last week because I signed up to a bluetooth connection, Wi - Fi connection no longer works.
    It can even detect a wireless network around me; I don't see every time when I try to connect, & it asks me to diagnose the problem & said something like "the signal is too weak.

    I'm sure that is not the problem of wireless service - all my friends can connect to him!

    What should I do?

    Maybe the wireless LAN tipped off?

    Try to press Fn + F8 to toggle wireless devices.

    Also make sure that the wireless switch is turned on in the front and the sides of the laptop.

  • Receives the "Acquiring Network Address" message when I try to connect to my network, but never connects to the internet.

    Acer Aspire 4736 XP acquiring Internet connection problem

    I have a laptop Acer Aspire 4736 and he was not able to connect to the internet, we have at home for almost 2 days now. I have Windows XP 32-bit. It displays 'Acquiring Network Address' but never connected to the internet. He never had this kind of problem before. I asked the ISP, technical support, and my other computer could connect to the internet. Only my Acer Aspire 4736 unable to connect to the internet. I wanted to have my acer continue good so I can give it to my mother.

    Acer Aspire 4736 XP acquiring Internet connection problem

    I have a laptop Acer Aspire 4736 and he was not able to connect to the internet, we have at home for almost 2 days now. I have Windows XP 32-bit. It displays 'Acquiring Network Address' but never connected to the internet. He never had this kind of problem before. I asked the ISP, technical support, and my other computer could connect to the internet. Only my Acer Aspire 4736 unable to connect to the internet. I wanted to have my acer continue good so I can give it to my mother.

    There seems to be a problem with cell phones and wireless encryption type I gives some links to solve this problem, because it's my job to do in my company so please follow the links

    1. http://www.technology-HOWTO.com/2011/08/how-to-fix-Windows-can-not-configure.html
    2. http://www.technology-HOWTO.com/2011/08/Windows-is-unable-to-connect-to-network.html
    3. to update the wireless drivers, click here to find out how
    4. go to services.msc and stop and restart the wireless zero configuration/wlan auto configuration
    5. If nothing works then change the encryption type, click here to find out how
  • My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

    My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

    original title: status: network address acquisition
    Hi BKlap,
     
    Try these methods in the order.
     
    Method 1: Repair the network connection to solve the problem.
    For more information, see:
     
    Note: The information in the article applies to Windows XP Home Edition as well.
     
    Method 2: Follow the steps listed in this article to resolve the problem:
  • Satellite A200-1VP - new WiFi card does not work

    Hi all

    I just bought an intel 4965agn wireless card to replace the original card intel 3945abg. I bought the card on ebay, it's a computer dell laptop.

    I installed it (connecting the black wire on pin 2 and the white wire to Terminal 3). The device appears in the device manage correctly without any problem. I installed the latest driver from intel for this card.

    the problem is that no wireless connection cannot be captured. the utility intel built in diagnosis, the card seems to fail the test of material. The section troubleshooting said to check the Device Manager and install the appropriate drivers. I've done it before, so I'm not sure of the problem.

    any ideas?

    Thank you

    Hi ansarali,

    Why you traded a new WLAN draft N card if you can t use it? I want to say that your laptop was only equipped Intel abg card and for standard project you also need 3 antennas and as much as I know Satellite A200 are not equipped with 3 antennas

    In addition, the antenna cables must be connected correctly. This means that you must connect the white cable to the HAND and the black cable to the auxiliary voltage
    Check this box!

  • Satellite A200: SD card reads sometimes only

    Hi all

    I have a Satellite A200 - 14 d (Win XP SP2) and my SD card cannot be read sometimes.

    I insert the SD (from my digital camera) into the slot (with adapter memory stick), it detects, but I can't access the drive E: (the memory stick reader). The returned message is + "Please insert a disk in drive E:." + "

    If I try to delete safely, he returnes + "the"Device MemoryStick0"device cannot be stopped now. [...]" +.

    Sometimes, it works perfectly. I insert the card and the small "open with...". "window opens to the right.

    Hello

    How many times this problem occur? You may need to update your BIOS and install the latest drivers for your computer. You must also make sure that your smart card service is started successfully in the "services".

    Some comments would be nice :)

  • Re: Satellite A200-1Z3 - LAN cannot detect anything

    Hi, I have a problem with my Lan port

    When I connected the lan cable only 1 light turn on and my system (Windows 7 Ultimate and Linux Ubuntu 11.04) cannot detect anything. Cable works at my book of fathers, but I have a problem, starting after that when I gived computer Service Center, I haved some problem with hard drive. Now, I don't have a warranty.

    How can I solve this problem?

    Toshiba satellite A200-1Z3 PSAE3E

    Thank you...

    Hello

    If the green light of LAN port lights if a cable is connected to the port LAN work physically so I doubt s faulty.

    The network adapter is in the Device Manager correctly and have you tried a driver update?

    Have you tested this situation on the factory settings?

  • Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

    Hello

    About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
    It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

    Some time passed and I removed Vista and now I have Windows XP with sp3.
    All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
    I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

    Here's a screenshot of my device manager:
    [http://img22.imageshack.us/my.php?image=devicem.jpg]

    Those with question marks is not supported by XP as I know, correct me if I'm wrong.

    Hello

    Satellite A200-1AX belongs to the PSAE6E series.
    It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

    Regarding the housing of card reader SD;
    You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

    By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

    Good bye

  • Question about graphics on the Satellite A200-1VO card memory

    Hello
    How do you assign more memory to the graphics card on laptop Satellite A200-1V0?
    Thank you

    Hello

    in your case it s not possible to change the size of graphics by yourself, memory as graphics memory in your machine is shared with main memory, so if you upgrade main memory and graphics memory should increase. But this question is governed by the chipset and the user has no influence on it.

    Welcome them

  • Satellite A200 - 23K - card SDHC not recognized on Windows 7

    Hello, I have a toshiba satellite A200 - 23K.
    I just installed Windows 7, all drivers support drivers toshiba and all the updates of microsoft windows, including the suport of 32 GB SD flash cards memory.
    http://EU.computers.Toshiba-Europe.com

    But in the Device Manager there is a witch of the element named "mass storage controller" has not been installed (which would be the SD card reader), but I didn't know any driver for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" and installed the VISTA driver instead. Now, the look of the device is fine in Device Manager, but he only read a normal SD card, and when I insert a SDHC 4GB it came to nothing. In windows XP / vista and linux (fedora / ubuntu) there is no problem with SDHC (4GB and 8 GB Kingmax SDHC class 6).

    I would very much apreciate in advance if someone will make a driver for the card reader (I use it pretty mutch for photos).

    Hey Buddy,

    I think the problem is the Vista driver expired that doesn t work 100% correctly on Windows 7

    As much as I know Satellite A300, which supports Windows 7, is also equipped with Texas Instruments card reader, or at least the pilot is also from the same company with respect to the Satellite A200.

    In your case, I would try this driver, I hope it works! :)

  • Satellite A200 - new card Wlan (Intel 5300) = Wlan led is always OFF

    Hello world

    I have recentlly bought a new card WLAN Intel 5300 (533AN_MMW) for my Satellite A200 - 1 CG (PSAE3E...). I installed a new card without any problems, downloaded and installed new drivers (Win7) also.
    The problem is that the Wlan led does not illuminate any. So I don't see the card functions normally in the Device Manager, but cannot establish a wireless connection because the Device Manager indicates that the WLAN switch is turned off.

    Help!

    Kind regards
    Igor

    Dear Igor

    Can you please tell us what A200 you exactly (A200-xxx) so that we can check the Toshiba for Win7 download page?

  • Satellite A200 cannot see wifi

    Hello
    I have a strange problem, up to what my wifi has now works well, but today, I don't know why my laptop can't see the wireless networks, as if the antenna was turn off. Of course, it's on, I see an orange light that reported that. I try to reinstall the drivers, but it did not help.
    LAN works.
    My computer: Satellite A200 1 M 4, Windows XP Professsional SP 2

    First of all, you should check if the wireless network adapter is still recognized in the Device Manager.
    If so,->, you can always try to remove and update the WLan driver.
    In addition, reset the WLan router. The reset of the router is necessary and especially it solves some problems with strange connectivity.
    Last but not least use the FN + F8 key combination to activate the WLan antenna

  • Satellite A200 works fine on battery but hangs when adding power supply.

    Hello
    I'm having a problem with my Satellite A200. I have no problem when I charge the battery and just run the battery, however, as soon as I plug in the adapter and I have problems.

    The machine seems to freeze and the screen has different colours in the lines and blocks.
    I bought a new adapter, but same problem persists.

    I think that this is without a doubt for professionals and I recommend you to contact the nearest Toshiba authorized service provider.
    Explain the situation and let it check your laptop.

    The A200 is older model laptop and I can't imagine you have been faced with a question described the first day so I'm afraid that there must be some hardware problem and to fix it you need professional help m.

Maybe you are looking for

  • audio input to the air of the ipad

    We have an ipad air we want input audio anilog on my ipad. is there a way? We tried the camera with a usb audio adapter, but the ipad says that it is not supported. The 32 plug is heavy and I don't like the way he wants to bend. What other way can I

  • Lack of sm bus controller driver

    After recovery from an initial recovery disk, sm bus controller driver was missing and cannot be found anywhere on my PC.  I uninstalled the driver and did restart, but he was not found anywhere.  I tried to download driver for my PC Acer install fro

  • PC (Vista) stops at the start even in the trunk or the repair mode.

    On his return from a trip, I rebooted my computer. Loaded Windows. After a few minutes, it will turn off by itself. I rebooted and you stop again just after the end of the loading of Windows. I restarted again and was able to open some apps and the c

  • Pavilion x 360: auto repair loop

    My laptop was working fine. I left home and came back, and now it is stuck in a loop of auto repair. I was looking around a bit online and nothing has worked. I can't enter the mode without failure or BIOS. I don't have a disk hard or in any case to

  • Pattern

    Database: Oracle Database 11 g Release 11.2.0.1.0I created an XSD to validate an entries in an XML file. XSD is then downloaded in oracle.One of the requirements is to validate this:< 1-65535 >: < 1 -65535>(so any number between 1 and 65535, then ":"