Satellite A200 - 1 2 has no DRIVE in the BIOS

Similar Questions

• Satellite A200 - no visible CD/DVD drive in the BIOS & workstation

  Hi all!

  I have this problem.
  I downgraded from Win Vista to XP.
  First, everything was working fine, now after reinstallation, I discovered my DVD ROM is not in my computer, not even in the bios.

  Also does not work when I try to reinstall the system (boot from cd drive is not found).
  It is possible to open my CD Rom, is light flashing everything looks just ok I can't use it.
  I would say that I need drivers for the cdrom or whatever, I don't really know.

  I was looking at this forum all night, until now. Please help me with this, it's URGENT. I was trying to install a lots different drivers, nothing has worked.

  Please someone contact me here or at the [email protected] as soon as possible.
  Thank you so much everyone.
  PS Sorry for my bad English I hope you understood my problem well.

  Enter the BIOS, the default settings and check again.
  CD/DVD drive is listed as boot device when you press F12 at the beginning upward?

• Satellite A200 - 26J PSAE6E: No. HARD drive during the installation of XP

  Hay @ all. My name is ahmet.

  I'm from the Germany. I have a problem.

  I bought a toshiba laptop and I think it's a very good laptop.
  But I don't like Vista. It uses to much space, much grafic and a lot more.
  So I tried to install my old windows XP Professional sp2. Here's the problem:

  During installation, Xp procres say there is no hard drive.
  Hmm, I thought I should have a look on other forums. There, they said to integrate a sata driver on the xp cd.
  But I don't understand the using nLite to use.

  Could you show me how I had to reinstall my old XP?
  I have a lot of files to my laptop and I change some settings in Vista so that I could not use internet.
  If I want to reinstall vista with the recovery cd, it would remove all folders, photo ect.
  I use only my other old computer.

  I would be very happy if you could help me.
  Thank you very much!!! If you have an answer I would be too happy

  my system:

  Toshiba - Satellite A200-26J

  Modell Nr.
  PSAE6E-0F000HGR

  Technology

  Hello

  The nLite is a freeware program that helps you to integrate the SATA (Intel matrix Storage Manager) driver in the original XP operating system.

  If you want to know how to use nLite software, then glasses a bit.
  There are many websites that explain how to use nLite.

  (Driver SATA) Intel Storage Manager can be downloaded from the Toshiba driver page.

  Last month, I created a new XP CD using the nLite.
  I've included a few pilots, SP2 and some patches it of really not very difficult.

  As I said... Scope of protection is a key ;)

  Good bye

• Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver

  Hello.

  I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB).

  I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.
  The computer began to be very slow, and since I had a lot of programs that I wanted more I restored it to the out of the box.

  The problem is that the screen went black after the windows logo. He worked only in safe mode. I deleted the drivers of graphics cards and it works but without a graphics card.

  Now, I can't play games or watch movies.
  Whenever I try to install the driver, no matter if its from the cd that came with the computer, the toshiba Web page or the Web site intel it still restarts black screen.

  I tried to disable the adapter instead of uninstall. When I enable it, she accepts and he will say his work but just with screen resolution of 640 x 480.

  If I try to put it above it is always black.
  Can someone help me?

  Thank you very much

  Hello

  First of all, you should visit this Australian page from Toshiba:
  http://www.ISD.Toshiba.com.au
  You will find all the drivers for this model of laptop.

  I checked and found that there is a BIOS v2.5.
  Check if the BIOS needs to be updated (if the older BIOS is installed)

  In addition, there is a display driver v14.29.1.4833 and chipset driver v8.2.0.1012
  Install it!

  Last but not least the Win XP should be updated to the latest state!

• Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

  Hello

  I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

  Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

  When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

  I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

  Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
  Would this work?
  Anyone have any ideas?

  Here's an interesting article from Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
  Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and check if the CD/DVD drive would work again!

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• Satellite A200 - 1 M 7: request password after update Bios

  I have PC Satellite A200 - 1 M 7.
  I downloaded the update of BIOS, installed.

  After completing the installation application password PC (I have had no password on the front).
  BIOS is also asking password.

  Can you help me?

  It's strange, but a BIOS password can only be deleted an ASP.

  In your case I find the nearest ASP and ask for help.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Portege 3500 didn't detect the HARD drive in the BIOS

  Hi forum,

  I go out the HARD drive, when I stick to the rear; the BIOS didn't detect the HARD drive.
  How can I configure the HARD drive in the BIOS? The discs i/o isn't editable t option.

  I need urgent help...

  Thank you

  Try to access the BIOS and set the defaults. Don t forget to save the changes. ;)

  A friend of mine had a similar problem and the BIOS default settings has been the key.

  So check it out

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• Mini 110 is not to find the hard drive in the bios

  I fix this hp mini 110 1025dx for a friend model...

  I can't find the hard drive in the bios... after removing the HD (seagate 160 GB), I could not mount the drive, with windows or Linux... Re-installed the HD and the bios still cannot find HD help... Please...

  Thanks, in advance

  Hello @quickcarl,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I stumbled upon your post on the issue of BIOS and wanted to help!

  Have you tried to restore, or update the BIOS?  Try to review the following document and let me know how it goes: HP Notebook PC - BIOS recovery

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite A200-1AI - Windows has detected the hard drive error

  Hi guys.

  I think its time I replaced my hard drive. Ive done all the checks and his return there is no errors with the hard disk, yet whenever I connect I get a message saying that there is.

  I guess that's only a matter of time before things get more serious.
  Its just now that it unattached restarts automatically.
  Ive gave my laptop below specifications and the specifications of the hard disk drive.
  I do not know which drive hard im supposed to be looking at.

  I don't want to buy one and then duty send because its incompatiable.
  Ive done some reading on the internet and he says I cn buy any production, but I need to know wheather its an IDE or SATA, what are these and what do mean? How can I find out what my current car?

  Also should I look for a hard drive with the same speed? It doesn't matter if its fatser?
  Wise, capacity is also ok for larger, will my laptop be able to handle it. Thanks for help

  MODEL NAME: Toshiba Satellite A200-1AI
  MODEL NO.: PSAECE-00U00JEN

  HDD SPEC:

  TOSHIBA MK2035GSS HARD DRIVE
  CAPACITY: 200 GB
  CERTIFICATION: S.M.A.R.T
  DrRIVE ROTATION: 4200 RPM

  Hello

  The Satellite A200 supports the SATA HDD controller.
  That's why you need to buy a SATA 2.5 HARD.
  The value of the rmp is not really important for compatibility issues with the 4200 RPM HDD or more is possible and compatible.

  SATA controller not limited to any size of HARD drive, you can also use large drives.

• Satellite A200 - internal mic has background noises

  Hello

  Description: Internal microphone with full boost, and volume has background noise. By reducing its levels, it has insufficient gain to drive Skype etc, so the only viable solution is to use front mic. Have you tried several MICS known for work on the other PC.
  Logbook - sometimes when its clogged, the front mic back, is the only micro displayed, but his level is very low with settings on full boost, and volume, is hardly audible; It is not set to mute. Sometimes the settings panel shows two microphones with works front and internal as well as external. EG remove the front plate near mic and it responds.

  I am a hardware engineer and it does not appear to be linked to the defective mic connector on the front. Both the A200 is relatively new. Also, I've seen similar to this Google search topics, but no one had their similar fault solved.
  His may be a hardware problem, but given the bizarre behavior of two microphones working with trendy front in and sometimes not, it tends to suggest a driver problem. But I installed the latest driver, I could find: driver Realtek SA200-SM200-RealtekHD-6.0.1.5406-Vis64-Vis32.exe

  I do not ask questions, because it's my job to solve PC problems, but this one has really left me speechless.
  Kind regards
  Alistair.

  Post edited by: BigAlGeorge

  Hello

  Which is really strange and I can only say that my girlfriend has a Satellite A200 too but she doesn't have any problems with the internal mic. She uses the microphone for MSN and Skype, for example, but without any problems.

  In any case, have you tried with the factory settings? I mean the Windows Vista preinstalled with all the drivers and tools of Toshiba. Normally with these settings, all should properly.
  Additionally, make sure that you have installed the latest BIOS for your laptop.

  Welcome them

• Satellite A200-1BP: need to display driver for Vista

  Hi guys!

  I have a satellite A200-1BP... that one must download a±? A± did not understand these = PSEAC, PSEA0...

  So I installed one of them for vista... for geforce go7300.but my display driver has not changed... it still didn't give me that a± want a good perormans... A± couldn't play NFS carbon: (...) How can a± install my display driver for vista? help me... Please explain correctly and in detail

  Thanks for your answers rigth now...

  Hello

  Additional numbers describes the series of laptop! There are different A200 series!
  At the bottom of the unit, you will find the integer and you need only the first characters and numbers 5.

  Please choose the right Satellite A200 series and download the graphics driver on the right!

  But the way in which; I don't know if the game performance will improve after the installation of the new graphics driver I've read somewhere that Vista needs a lot more material performance and that's why some games don t m runs smoothly.

  In such cases, it s advisable to run and play games on Win XP operating system!

• Satellite A200-1YW - required storage card driver for Windows 7

  Hello.

  I have the problem with the driver installation on Windows 7 storage card. I can not find the suitable driver for this model. Pls give me link to this driver.

  Hello

  I guess you mean the Flash card reader on your laptop?

  Satellite A200-1YW belongs to the series of PSAE3 I think and that's why you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I founded the driver for Vista 32 bit. If you use Windows 7 32 bit, you should try this driver. Normally it should work.

• Satellite A200-1AX: Win7 has very limited screen resolution

  ?:| Can someone help me please?

  I have a SCREEN RESOLUTION (1280 x 800) after that I went to w7, before I can get about 1600 x 1280 when I was in very limited vista. I lost my vista recovery disk so I decided to go with w7, but after that I did some installations/updates to update for all my drivers again my screen resolution gives me the size 1280 x 800 maximum.
  Anyone? Please? I need your suggestions...

  -J' have a Satellite A200 1AX (recently moved from vista to w7)
  -Screen: 15.4 "
  -My graphics card is ATI Mobility Radeon HD2600.
  -I just downloaded the latest driver from ATI.

  Please tell me what I'll do.
  Thanks in advance guys...: D
  Jeje

  > Until I can get around 1600 x 1280 when I was in vista
  I can't believe that why?
  Because the screen internal 15.4 "WIDE XGA supports a maximum resolution of 1280 x 800.
  Max which is possible on the internal display, and as a result, you will not be able to choose a higher resolution on the internal display.

  The resolution of the external display may be higher but not the resolution of the screen internal.