Satellite A200 - 1 GB: after upgrade to Vista Ultimate-> issues

Hello

I upgraded my Vista ultimate laptop, but I found a lot of problem:
1 - the Fn + F1, F2,... no longer work.
2 - get a blue screen,

So I tried to do a clean install of vista ultimate, but I had no more problems!
for example:
"When you try to install the utilities equipment & password, I get a message" incorrect series.

The media player shortcut key do not work
If I install the toshiba value-added, the Fn + f1, f2... no longer work.
In addition, no bluetouth software, no card Flash, no test available in the diag...
and also, the BLUE SCREEN.

I don't know if anyone can help me and thak you

Baker

Hello

already made an update of the BIOS? It would be useful, maybe it s just because the BIOS does not correctly handle the Ultimate. What drivers did you download?

It s a bit tricky, but I think that if you reinstall, and then put the drivers on it, it should work. Don't forget: Vista Ultimate needs a lot of resources and a bunch of useless stuff that can cause the machine does not properly.

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite P205-S6257: Chicony USB Webcam does not work after upgrade to Vista Ultimate

    I've upgraded to Vista Ultimate Home and now my Webcam does not work. When I tried to update the driver, I get a message that says that Windows has encountered a problem installing the software driver for your device...

    The installation file forthis training device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

    I succumbed to find the drivers on the Chicony website. My laptop is a Satellite P205-S6257 and the Toshiba is not yet display on their support site. I don't have a disk for webcam.

    Any suggestions?

    I wish more users would use the advanced search for the Toshiba forum because many topics have already been discussed here and the solution was already planned.

    Check this box:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

    or this thread
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24868&MessageID=91172

    In the thread above, you will find a link to this page in the solution:

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

    I hope I could help

  • Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

    After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

    Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

    Hello

    you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

    It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
    Would appreciate comments on your success.

    See you soon

  • 6 buttons do not work on Satellite U400-10O after upgrade to Vista Ultimate

    Hello

    I have improved my U400-10O of original Win Vista Home Premium to Vista Ultimate, installed every driver and utility, (some of them, for example PVAT repeatedly ;-))

    However, could not succeed to operate the keys of multimedia shortcut, Led power button, Media Player, game, etc... They did not work with the original Setup, but I need this Ultimate Win.

    What is the real solution to enable them to work?

    Thank you

    EIO.

    You may need to configure these buttons first
    Go in the * Toshiba Assist-> Optimize-> Toshiba button support *.

    There you can configure the simple buttons.

    But it might be possible that the PPV is not supported by Vista Ultimate, I've read about various problems after installing Vista Ultimate applications didn't work as it should.

  • Satellite A215 no sound after upgrade to Vista o Win XP Pro

    Hi all

    I bought Toshiba notebook A215 series with Vista for 2 months. I have upgraded to Windows XP pro yesterday, everyhing looks ok but no sound. I checked the management of the material for the sound card, it seems normal.

    Someone knows this problem?
    Thank you.

    Hello

    I noticed very strange and different problems after downgrade to XP.
    And to be honest, the question of his No. is not uncommon.

    You know that some series of portable needs a special version of the BIOS after installing Windows XP or Windows Vista. It is important to use the right BIOS!

    In addition, you should be sure you used the right and compatible Realtek audio driver.
    If you need to download a new one from the Realtek page.

    Last but not least you must update the operating system to the State.
    To do this, use this MS page:
    http://update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=de-de&cm=NAV&CE=Nav2b

  • Office Ultimate 2007 guard Assembly and re - configure any time, I try to use Outlook 2007 after upgrading from Vista Ultimate 32 bit to Win 7 Ultimate. Something is definitely wrong with Outlook 2007 and Windows 7

    There must be a fundamental incompatibility between Win 7 and Outlook 2007. It would be nice if Microsoft looked into this right away and immediately corrects before we start trashing Win 7.

    Hello oguchi,.

    Thanks for posting on the Microsoft answers Forum.

    Office 2007, including Outlook 2007 are compatible with Windows 7.
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Office%202007&page=1

    If you're still having problems with Outlook 2007, it would be better to post in the Forums Office.
    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

    Hope that helps.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • No sound after upgrade to Vista on U-series of satellite - solution

    Hi, I had the problem that I had no sound after upgrade to Vista Business.

    After several attempts to get a solution from Toshiba I found myself.

    Here are the steps to resolve this problem:

    1. update the Bios to version 3.5
    2 do a clean install of Vista
    3. install the added value of package
    4 install the audio driver
    5 install the patch "mute off".

    Should work now.

    Hey wow, it's really nice. Already bookmarked it. :)

    We users and me (freak ;)) appreciate good solutions.

    THX dude

  • Monitor HP w2338h area shrank after upgrade to vista 64 to 7

    Monitor HP w2338h area decreased by 3/4 in both sides, & 1/2 upstairs and downstairs after upgrade from vista to 7 settings I tried solving max on HP Pavilion a6857c please advise, I rebooted as the drivers for my video card an ATI Radoen HD 5450 and all updates for windows 7 home Premeium 64 bits & HP updates

    I rechecked the ATI Catalyst control Center and found that I could adjust the scaling and fixed the ProblemPlease share with anyone with a problem out

  • After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

    After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

    but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

    How to fix this?

    Glad to hear it.

    If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.
  • Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

    Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

    My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

    Hello

    Method 1.
    Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
    http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

    I suggest updating all your drivers from the link above and drivers Realtek especially.

    Method 2. Set the default Microphone.

    Once the drivers installed to check if the microphone is the default value, here's how:

    Exercise the functions mentioned below to adjust the Microphone as default:
    1. Click Start and click on Control Panel.
    2. click on sound, then a new window will open.
    3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
    4. now check if the Microphone is listed there and right-click on it and choose activate.
    5. turn highlighted that Microphone and click "set as default".
     
    For more information see the articles below:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
    http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

    How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

    Hello

    You can download the Photoshop CS 6 from the below mentioned link.

    Download Creative Suite 6 applications

    Thank you

  • Satellite P200-144 never stop correctly using Vista Ultimate

    Recently made a regeneration of my P200-144. Used with Vists Home recovery disk. Then upgraded to Vista Ultimate. After it was sold went to the web site of toshiba for the latest drivers and decided to update the bios.

    To restart the laptop is it never shutdown properly. Left with no other choice it off (left by logging out of the screen).

    Now computer laptop won't do anything. Is it possible to get the bios to boot / restore or do I need to reach a support centre.

    Hmm, looks a little more that the BIOS update failed?  :|
    Usually, in such situation the ASP help is necessary.

    But before contact you the ASP and will be sent to this device on the balance I would recommend removing the battery and disconnect the laptop power adapter.
    Then wait about 20 min, then reconnect both sides and try to start the laptop.

    If you won't be successful then the help of ASP is required

    Good luck

  • I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

    I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

    Hello

    Thanks for the reply.

    I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

    Method:

    Reset permissions
    ============

    1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

    2. go to your desktop and double-click on the downloaded file.
    3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

    4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
    5. copy the following commands, and then paste them into the opened Notepad window:

    off @echo

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
    Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
    Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

    @Echo =========================
    Completed @Echo.
    @Echo =========================
    @pause

    6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

    7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
    8. you will see a window of type BACK treatment.

    NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

    If the same thing happens, move to the next step.

    Run the upgrade by using the built-in Administrator

    ================================

    1. click the button start-> all programs-> Accessories.

    2. right click on command prompt and select "run as Administrator".

    3. click on continue when user account control window appears.

    4 copy the following command and press ENTER:

    NET user administrator / Active: Yes

    5 restart the computer and then log on the computer of this administrator account.

    6. run the upgrade to windows 7.

    Hope this information helps you.

  • Upgrade to Vista Ultimate

    How can I upgrade my Vista to Vista Ultimate? I already have the product key for Vista Ultimate. I tried to run the Windows Anytime Upgrade, but it seems that I still have to buy something on the site. What should I do?

    Hello
    Thank you for visiting the Microsoft Answers forum.
    To upgrade to Vista Ultimate, you will need the Vista Ultimate Upgrade or Full edition DVD, this media must have came with product key license you own. If you purchased your product key at any time to upgrade, they will provide you with the media needed to do.

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I have windows vista Home premium. How upgrade to Vista Ultimate in India?

    Windows vista Ultimate.

    I have windows vista Home premium. How upgrade to Vista Ultimate in India?

    Are you talking about changing the language of Hindi?  If the language you want does not appear in the optional updates in Windows Updates, then you can buy a copy of Windows in the language you want and reinstall Windows.  You can not upgrade.  You will need to do a clean install.

Maybe you are looking for

  • How to disable the Mozilla Startup tab

    I have just a single tab appears when I run Mozilla. In my case, it is my start page on GOOGLE. Why I also have the Mozilla Firefox Start Page? I do not need or want. How to turn off this tab it appears not everytime I run Mozilla Firefox? How to dis

  • Satellite A660 webcam not in the list of devices

    A660 PSAW3A-07R00R had for a few years, but cannot use the Webcam because it is not in the list of devices. I downloaded the webcam application several times, with the last V1.1.1.15, but does nothing after extraction.

  • Satellite L500 - 'Boot from a hard disk BBS' shown at startup

    I have a Satellite L500, when to start it comes up with 'boot from a hard drive BBS' and that's where he stays. I tried to change the sequence of boot and startup speed. Could this be related material or the recovery disc won't work?Any ideas I can t

  • VI is paused and while loop has highlighted

    I'm in parallel while loops and for some reason when it should start to run loops, it pauses for the VI and highlights one loops. It was not last week when I ran it so I don't know what is the issue. I've included a screenshot of the beginning of the

  • Write in a txt file to variable rate

    Hello I asked who need slower (100 Hz) datalogging initially and then to increase the rate of datalogging high (10 KHz) after some time. I've tried integrating variable data acquisition rates but not success. I also tried to maintain the rate of acqu