Satellite A200 - 1 M 5: sounds from the HARD disk that is not regular

Similar Questions

• Satellite A200-137 - cannot install windows after the hard disk crash

  last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
  I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

  After trying to install 3 times with recovert I tried to install windows xp.
  After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
  But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

  So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

  > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
  On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
  This title was the original HARD drive?
  If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

  Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
  Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

• access to the "My Documents" folder on the HARD disk that does not start

  Recently, I got 2 hard drives put in place into a monster of table (SATA) on me. I had an IDE hdd hooked that I had just never deleted. My "mirrored array' failed me so I ended up replacing my MB & CPU and started from scratch. The IDE hard disk has some very relevant info, I need to recover. I can get to basic files in there, but my most important stuff is in my folder 'My Documents' but as far as I can get is to open "Documents & settings". Another thing I try to open fails. I made a password but have no way to enter (at least AFAIK), I would appreciate greatly any help on this problem. Thank you

  Please see how appropriating a file or a folder in Windows XP .
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Satellite L450 - how do you start the recovery from the HARD disk?

  Hello world

  I just joined the forum and already I need help.

  I have 2 questions (10) I'm an ODP, and I volunteer for a local blind group who all have laptops and rewrite the textbooks in braille users. Now a desire to know how start recovery from the HARD disk drive and what you should do disks for this.

  and (2) another received a laptop computer Toshiba A 100 and it does not start as soon as the Toshiba screen appears it lacks a password, we tried all kinds of passwords, tails of start and a new record of program but it does not start. Can anyone help please.

  Ken

  For instructions how to recover a Toshiba laptop with verification of HARD drive recovery procedure please this document > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  The Satellite A100, I presume that you need BIOS password. Unfortunately, there is nothing you can do about it. Accredited maintainer Toshiba can remove the password for you.

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• Whistle sound from the hard drive

  I have a HP Pavilion laptop dv6, and recently, when I did a hard drive error checking, the hard drive has begun to produce a similar whistle sound. Additionally, the error checking was insensitive. So I had no option, but turn off the laptop directly. After turning on, it showed that I had to install an operating system! I turned off again, and then later, it works. This time, he's walking normally. But I would like to know if all precautions should be taken, since the noise coming from the laptop earlier worries me. I would like if this is normal or dangerous.

  Akhil

  Hi Akhil,

  The problem may occur if the hard disk is not connected correctly. I suggest you make sure that everything is connected and working properly. You can also see the article for the diagnosis of the hardware:

  Screening of hardware failures (Windows 7, Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01443317

  It will be useful.

• Satellite A100-998: Clunks from the HARD disk in just 2 months old

  This laptop has just started to make a rattle almost constant light, awkward - probably from the hard drive. No difference to the power of battery or sector. The noise is not related to the DVD at all drive. Moreover, the performance of the computer were normal.

  Should I seek attention warranty for ths noise or as pixel screen died strange, it's something I have to learn to live with that?

  Thank you.

  Hello

  In my opinion, you should contact the service authorized in your country partner and clarify the situation. If there is something wrong with the HARD drive you will get a new.

• Satellite A100 PSAA9A - drivers and applications from the recovery disk

  This laptop was reformated HARD drive and I decided to try Windows 7 (beta), which is currently installed and working well. I would like to install the original drivers and applications from the Toshiba recovery disc but I don't want to reinstal the operating system (XP). Is this possible?

  As far as I know that is not possible because applications from the recovery disk and drivers are for Windows XP and they are not compatible with Windows 7.
  In addition it of not possible to install the only special drivers or applications from the recovery disc.

  You can download all the drivers and tools on the site of Toshiba, but I doubt that it of compatible with Windows 7, but you can try it out and post your result here.
  http://EU.computers.Toshiba-Europe.com

• How to recover files from the hard disk recovery partition?

  There are recovery (D) on the hard disk.  How can I recover all my old files and programs of this drive?

  Original title: I changed from Vista Ultimate to Windows 7 operating systems.

  Hello sdf361,

  The recovery partition, that is what you would use to restore your computer when you bought it with the OS on it
  that was pre-installed. It is not your old programs and data on it. You will need to backup your data to restore and install
  your programs since the original installation discs.

  If you do not have the program disk, I suggest that the manufacturer of the computer.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• T400 problem booting from the hard disk, blinking cursor on the top left corner of the screen

  I have problems with T400 (2765-TDG). He struggled with the Setup, which requires power 5 minutes/disable to propely operating system boot.

  Computer laptop is less than two months, entirely properly the driver being up-to-date, then after that, nothing's been done about it to user or system administrator. Problem occurred suddenly after two weeks of mentioned maintenance.

  Symptoms:

  • After initialization of the mouse, screen goes black, and the upper left corner white cursor starts to Flash
  • There is no key keyb which can contine begin the process, wait for the reboot
  • There is no other device connected to the laptop, even mouse not
  • We have several, sometimes 3-4, sometimes even 10 times, to restart with the power button in order to get the boot of the operating system
  • When he is successful, just before the start of the operating system, the boot in diagnostic mode to start (with fast start disabled) I can hear only a single beep

  What I tried to do:

  • I changed the BIOS setting to force booting only from hard drive, cut off from any other starting device.
  • Also, changed from AHCI mode to compatibility for hard drive, but without help.
  • Turned off the coast of quick start, but during the startup process, there is no specific error indicated
  • Updated version of BIOS to 2.03 - 1.01 but with no help
  • Restored the default BIOS, no help

  Done some diagnostics generals, and here is what I noticed:

  • After changing the settings in the BIOS, save & exit, the computer hangs with a black screen. I have to turn off and on in order to continue the initialization. The settings in the BIOS are registered correctly.
  • When I was able to boot into the operating system (XP), graphics card sometimes is not recognized, not even by the original driver installation. In Device Manager, I have two graphics card drivers recognized traffic sign with "Intel management engine interface" device with warning sign
  • In Event Viewer, and then only error line is "Problem with HECI driver communicating with firmware" or something like that
  • Operating system is not able to enter in standby mode, it justshows white screen and I have to turn off the laptop by pressing the off button longer

  Any help appreciated. Thank you! I hope I can cope with this before I send laptop to the authorized service.

  Vedran

  I'm sorry to tell you, but in case, can I had to send laptop to the authorized service provider. They replaced the motherboard and the hard disk (!). Now, everything works fine, but puts shame on Thinkpad T series notebook.

• Deleting files from the HARD disk without confirmation?

  My catalog has thousands of duplicates.  I began to remove them by opening each folder & select 1 or more and do a right click to remove.  Whenever I do this I wonder if I want to remove the HARD drive as well and I always say Yes.  Is it possible to remove the step that requires the conformation?

  The old wax says:

  My catalog has thousands of duplicates.  I began to remove them by opening each folder & selecting 1 or more & then right-click to delete.  Whenever I do this I wonder if I want to delete from the HARD drive as well & I always say Yes.  Is it possible to remove the step that requires the conformation?

  I don't think so.

  But what you can do instead to delete each file individually: you can try to assign a keyword such as 'tobedeleted' to the selected files. You can assign the keyword for multiple files highlighted on your screen, browse another page and so on. When you're done, you select all files with that keyword and delete all at the same time with a single click to ' also delete disk.

• Remove stranded files from the hard disk to the VM package

  I have a virtual merger machine that is now 96 GB in size (database development) and it contains several virtual hard drives.  Now, I have cleared one of the drives on and outsourced (he placed on an external Firewire based drive).  Removing the abandoned drive does not reduce the size of the virtual machine.  Research in the VM package, I see that the hard disk file (vmdk) is always inside the package and using 54 GB.

  The question is so I can delete these files from the VM package or it will damage the VM?  I tried to make a backup of the VM, but right at the end that it maintains the production of an error so I would like to know if anyone has experience with this before making the jump.

  Removing a virtual drive simply deletes the references, it does not delete the virtual disk. If you do not have a snapshot (for example), it is safe to delete. Make sure get you the right one, well - I recommend you all first move somewhere else and then try to start the virtual machine. If it is used at the moment (but maybe not if it is only used by a snapshot), merge will complain.

• Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

  Hello

  Spilled water on the keyboard. Laptop has stopped working.
  Dried, but did not recognize the HDD start up and HDD does not Set - up.
  Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
  Is there an easy way to find and repair the defective HARD drive slot?

  Thanks for any help.

  PK

  Hello

  The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
  The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

  New motherboard would cost a small fortune he of not good about market 350Euros
  That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

  This is my personal opinion...

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley

• Try to migrate from the hard disk for ssd drive

  Hello, 4 days ago I bought dell inspiron with windows 8.1 5748 and a 1 TB hard drive.

  I also bought samsung 250 GB of ssd drive 840EVO to replace the disk of 1 TB of the laptop. I cloned the HARD disk drive and restored the image in the ssd drive and when I mounted the SDS disc and shot to the top of the laptop I got an error that it cannot detect a drive... Press F2 to enter setup F5 for diagnostics and F1 to reboot.

  First I made sure to rise properly. After I checked I entered the bios where I noticed that the drive is recognized in the details of the system. The model was correct, the capasity as well. Fashion was ahci.

  I ran the diagnostics and they couldn't locate a drive.

  So, is this an incompatibility? I checked for updates to the bios and I see I m to date on that. The player is surelly ok as I have tested on another pc...

  What can I do?

  Thanks in advance!

  Hi Add1ctiv3,

  We recommend that you use the recovery disks that are you ready when you got your system to restore the image of the original on the SSD hard drive. Since they have the same size, it should work without problem.