Satellite A200 - 1 MB don't wake up on hibernation

Similar Questions

• M70-160: don't wake up from hibernation or standby - hardware or software?

  I just maaaaaan!

  works fine, but will not wake up from hibernation or 5000mAh! unless you're going to wait a while! 15 min or something like that!
  After that he's going to wake up and work normally.

  I thought that it is overheating problem but now just turn it on and when the toshiba logo appear if you turn it off, it works again, but after 15 min it will BE!
  This isn't a problem of heating!

  She does this even without HD top!
  at first, it was the hibernation and standby problem, now it dose the same with stop!

  what I can do!

  I bought just the guys! ASP is now a way!
  is there anyway that I can do to fix this!
  I have difficulty PCs a lot, but not books!

  Hello

  You can also contact your local Distributor and check with him. They also have enough experience. On this path, it is not easy to tell exactly what is happening.

  Is the unit preloaded with recovery media or with your own operating system?

• Satellite A300-15 b don't wake!

  Well, I can go to sleep mode but the computer comes to wake up
  I try everything and its just stays in mode 'sleep'
  What can I do?

  Thank you

  This happened to my laptop a couple of times.

  To fix:

  Remove the battery and the AC.
  Remove or add a module of memory (you want to change the size of the memory).
  Turn on the laptop, it should detect the change in the size of the memory and give an error failed to resume.
  Turn off the laptop and replace the original in memory.
  Start normally.

• Satellite A200 - 14 d don't remember display settings!

  Vista drivers and 7300go cannot save Gamma, sharpness, contrast settings... It is not very nice.

  Now, can someone tell me what file I edit, hexedit or do what's necessary to put 0 in Gamma and Image sharpening settings.

  I'm ready to do what ever it takes to the Gamma 0 value!

  Help, please.

  Hello

  I m very surprised of your message with the question. He should be able to set\ all these settings in the nVidia Control Panel Vista!

  If it is not possible to s to remove the driver and the graphics card from the Device Manager and rebooted new reinstall the driver downloaded from the Toshiba page GPU!

  PS: If you change some settings don t forget to press Apply ;)

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• Satellite Pro P300D-21F - how I wake up from hibernation?

  How do I wake up? tried the mobile mouse by pressing different keys. If you press the power button / stop watch computor message was not closed properly.

  Hey,.

  Normally the computer may be trampled to the top of the hibernation mode when you press the power button. The same button as you start the computer normally.

  What operating system is currently installed? What is the message you get exactly?

• Satellite A10 is necessary for well wake up from hibernation

  My Satellite A10 takes about nine minutes to Hibernate when the lid is closed, but the computer start faster when you press the Start button. Energy saving mode has been implemented correctly for the hibernation.

  Hello Terry,

  The hibernation feature works by copying the current contents of the RAM to the hard disk so that when the laptop is powered on the contents of the RAM can be restored and CANM unit and continue to operate as it did before being closed. This is different from the day before where the contents of the RAM is held in RAM and is maintained by battery or AC power.

  The Hibernate feature takes longer to call because of the time taken to write the contents of the RAM to the hard drive. The actual time required will depend on the amount of RAM you have installed, and also what processes and applications you run when you call Hibernate.

  If the actual time is too long then this could indicate that your hard drive may have some attention (cleanup and defragmentation) or the drive itself has problems (bad sectors), causing it to start over read/write operations as it attempts to Hibernate. I suggest that you try to clean the disc and then running CHKDSK to check if the drive is physically OK.

  Kind regards

• don't wake up after hibernation at all

  I have a Toshiba satallite running Vista Home and it went into hibernation and will not come out of it. I tried to remove the battery, release the battery died, each key on the keyboard while feeding system, any withdrawal of the laptop and trying to start it. I've been looking for days and tent everything to get it to you wake up with no luck. I have pluged to the top of each type of unit just waking and nothing. All I get is the power button lights up, housing starts of HD to go upward and the sleep icon will light up and the processor fan runs, but nothing else. It's a P305D-S8828.

  Any help would be much appreciated.

  Hi Jeff,

  I think Sandeep is one proposed that there is a problem with your hard drive or the motherboard.
  When you press the power button on your laptop you see anything on the screen? Are you able to get into the bios of your computer?
  You will be able to check to see if the hard drive is still detected by the laptop in bios. If the drive has failed, it probably won't see the upstairs.
  Warning: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Satellite A200 - how to replace the HARD drive?

  Hey, I recently some strange problems with my laptop. I installed a new copy of Windows Vista and also tried with Windows 7 a few times. But eveytime I get problems. The installation of the operating system right. But after I installed some Windows updates my computer becomes very slow and at some point, I am unable to install any application, because it crashes just when installing... This happends with all the big software products such as Visual Studio, 3d Max, After Effects... etc.

  So I think that my HARD drive has a large number of bad sectors. I also tried to erase everything on my drive with KillDisk, but it hangs at 16%. Once again something that seems to be my HARD drive.

  But before you buy a new, I'd like to hear your opinions on my problem and I would also like to know how I have to replace my HDD on a Toshiba Satellite a200. I don't know where it is placed and what parts I need to unscrew.

  Thanks for any help.

  Hello!

  The HARD drive is placed on the underside of the laptop.

  The HARD drive on the underside Bay is fixed by two screws. Remove the screws and the HARD drive. Then you can swap the HARD drive.
  But unplug the AC adapter and remove the battery before doing this.

  The new HARD disk must have the SATA interface.

  Good bye

• Memory Stick Pro DUO is not in my Satellite A200 - 1 H 2

  Laptop computer most I want to set up my Memory Stick Pro DUO inside the laptop, but not this one, it can t happen so I tried to put the Memory Stick Pro DUO in one of these adapter Memory Stick DUO that accompany it, and although it does not connect, nothing happens...

  What is c? Why can't t my laptop does not recognize it? Doesn't it support?

  Hello

  I don't know what you mean with most laptops, but it is logical that each laptop producer offers very precise specifications where you can read about the compatible memory cards that can be used with multi card reader.

  Have you checked the user's guides document for your Satellite A200? I don't think so.

• New Satellite A200 is restarted after installing XP

  Hi all

  I hope someone can help with this problem.
  I have a new Satellite A200 and made in the wake of the SP2 and matrix storage drivers.
  I completely deleted all partitions on the disk and installed XP (slipstreamed version).
  All going well until the first reboot and then it restarts just over and over again.
  If I have safe mode of choice it loads correctly and I can't install drivers etc.
  I wonder if it is a BIOS issue?
  I tried to update using windows bios update for XP and it will not allow in safe mode.
  The reboot happens before even starting XP screen appears, hard drive blinks twice, then it power cycles.
  I hope that I'm not the first to encounter this problem.

  Any help would be appreciated.

  Hello

  Mhhh very strange to me, it looks like a software problem!
  In Windows XP, the default setting is for the computer to automatically reboot when a fatal error occurs. If this fatal error only occurs when you stop, the system reboots automatically.

  Have you noticed the same course the Vista OS?

  What you could do is to install the Vista from the recovery CD again, and then update the BIOS to the XP version.
  After this procedure install the XP with all the service packs and the compatible Intel matrix Storage Manager

  Good luck

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• Satellite A200-238 - no wake mode from 'sleep'

  Hi all

  When my laptop goes to sleep automatticly or 'forced', when I push the power button, it won't wake up.
  I normally just push the powerbutton 1 time and he wakes up, but now its no longer works.

  I shut down the pc by pressing the powerbuton for a few seconds.
  I can't reinstall is the solution easy, but with all my data on it its not so easy to transfer everything.
  So im wondering if there is any other way. The device is a satellite A200-238 (vista).
  The mobo is the 1.00 ILHAM with bios V2.00.

  Thanks in advance

  Hello

  As I understand your problem, your notebook screen remains black and not wake mode hibernation or standby.

  Well, buddy, I think I have good news for you the OS reinstallation is not necessary (as I m wrong completely ;)).

  I see you are using the old BIOS.
  So to my knowledge the BIOS update should help you resolve this annoying problem.

  Check it out ;)

  Good bye

• Re: Satellite A200-1FL: BIOS asking me a password that I don't know

  Hello world

  Last week was a bad BIOS update and my laptop has not begun. I managed to fix it with the crisis recovery disk and the "BIOS update" of the toshiba support web http://support.toshiba-tro.de/tools/eula/info_eng2.asp for Toshiba Satellite A200 PSAE6E, Windows Vista.

  My problem now is that BIOS and system start-up or disk, after that the BIOS to ask me a password that I don't know because I had a different password for the BIOS and no for the starting System.

  Anyone who would these passwords? I tried a few default passwords found in internet with no luck

  Thanks in advance

  Hello

  I think that if someone can really help with this password or something like that in this forum. You should contact ASP (SAV).

• Don't know how to get down Satellite A200-1MD to WXP

  I bought the Satellite A200-1MD 3 months ago and I want to downgrade Windows Vista to Windows XP, I have not yet tried, but I need help with the downgrade, can anyone help?...

  Thanks in advance.

  Hello

  Don t you need a lot. Download the drivers for your machine by clicking [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] choose your machine (model number is PSAE0E) and registration of all the drivers available on your machine. Then I suggest you to burn all the drivers on a CD to get to your hands after installation.

  It could happen that your hard drive is not recognized during installation. It comes from the lack of drivers SATA (Serial ATA) on the Windows XP CD. This can be solved trough the "F6Floppy" or 'slipstreamed Windows XP CD' solutions. Sorry I would now not explain the WHOLE process how do this because this problem/issue was discussed, about 1,000,000 times here in the forum.
  I guess you already saw the text box 'Research Forum tips' above. Take these words I gave you above (F6Floppy + CD XP Slipstream) and type here or in google.com.
  You will find many useful documents.

  Otherwise there is no special thing, you need to take care off. (Plus I Don t know what I could tell you about your installation of XP on your beautiful machine path ;)))

  That's all, good luck and good weekend...