Satellite A200-10W - external monitor with graphics problem

Similar Questions

• Re: Satellite A200-1IZ - external monitor problem

  Hello
  I recently bought an IPS monitor for photo editing. I configured the monitor in several ways, such as two monitors or monitors extended, but the image on the external monitor has a few little flicker and the image is not very pleasing to the eyes, a feeling like little refreshment on old monitor, very disturbing for the eyes.
  I plugged the monitor into another laptop and the image is much better.

  What could be the problem? I have Windows 7 32 bit and Ati Mobility Radeon HD 2600 adapter with the latest drivers.

  We do not know what monitor you have exactly, but what is the native screen resolution and what resolution is set to the external monitor when you use it with your laptop?

• Satellite A200-1AX - External monitor reset

  I got my car and Acer monitor 20 inch and after a few minutes of use resets the monitor (becomes black and goes up to 1280 x 800).
  I tried on a different Satellite A200 with same works card (my brothers) like a charm, but when his hook on mine it keeps resetting. And also I see horizontal lines on the screen.

  My model is TOSHIBA Satellite A200-1AX (with a vga HD 2600 card).

  Hello

  You can disable the option in the power options of Vista to prevent mode standby when the lid is closed.

  > I got my self and Acer monitor 20 inch and after a few minutes of use resets the monitor (becomes black and goes up to 1280 x 800).
  However, reading this post I'm not sure if your external monitor goes black or the A200 display internal.
  Is what screen affected?

  Did you try a BIOS and update the display driver?
  If this is not the case, check this box!

• Question about the use of with Satellite A200-10W USB network card

  Can I possibly use a wireless-G USB network adapt to my Satellite A200-10W [with Wi - Fi Finder]? Pls advise. Thank you.

  Hello

  Why not? Surely, you can use this stick with your machine. Just put em in a USB slot, install the drivers and then let go! :)

  If you have any other questions, then just ask.

  See you soon

• Tecra S4: cannot switch automatically to an external monitor with APR 3 +.

  Hello

  I used a Tecra S4 (with Windows XP Prof.) with monitor 3 + and with an external 19 "Advanced Port Replicator. If I connect my laptop with the Port Replicator, it will automatically switch to the external display. I have to use the function "FN" to move."

  I signed up the external monitor with "use this device as the primary monitor.
  I don't have this problem with my other laptop Toshiba Tecra A3.

  Now, I think the problem is the geforce graphics card.

  Does anyone have the same problem?
  Thanks for the help and sorry for my bad English; (o)

  Hello

  It works with Tecra S4, too.

  Install new Modules of Commopn
  http://support.toshiba-tro.de/Tedd-files2/0/CMOD-en-20071119111948.zip

  Install the latest Toshiba laptop Extensions
  http://support.toshiba-tro.de/tools/Tecra/TS4/XP/TME/TME-TS4-XP-38400xp-en.zip

  Install the display device change Utility
  http://support.toshiba-tro.de/tools/Tecra/TS4/XP/DPL-change-drv/dspdevchge-TS4-XP-2500-en.zip

  Enter in Control Panel, start Extension mobile controls.
  Go to the tab 'Change of display device' and activate the Service.

  Now, it should work.

• How to set the memory of the Geforce 7300 in Satellite A200-10W?

  Hello
  my laptop Satellite A200-10W, came with a Geforce 7300.
  I know that the card has its 256 MB dedicated memory, but I don't know how to use shared memory.
  In other how can words, I use the committed memory, as well as the memory shared of my cards.
  Thank you.

  Hello

  just for info: won´t you get more than 256 MB of RAM. The only graphics memory is your dedicated, I Don t know what you mean with that shared, in my view, there is no available shared mem.

  Welcome them

• Satellite A200-10W: I lost dual-mode Touchpad after Windows update

  I got a satellite A200-10W. The touchpad worked well at the beginning. Then, an update of windows has been installed and I lost dual mode on my touchpad.

  It is for me a normal function as a touchpad, but the mode button does not work. It lights, it do give me the button options, volume control does not work it did not scroll even in normal mode either.
  I reinstalled the drivers both synaptics and alps, but nothing helped.

  How can I ever use dual-mode again?

  Thanks for any help!

  Hello

  Very strange I didn't noticed any problem with the touchpad after the windows update.
  I have updated my windows and then lost the sound. After restarting again I ran the update and the Øresund back

  But if you, it seems that the MS updates could be a bad influence on the functions of touchpad.

  Have you chosen the touchpad drivers just for the PSAECE series?
  The Synaptics Touch Pad driver to set the properties and the touch pad control functions.
  And the Alps Electric Touch Pad Driver allows you to set the properties and functions of mouse control.

  Perhaps you need to configure the settings again after the new installation of drivers touchpad?  :|

  But have you tried to update to Windows Vista again? Sometimes, you have to restart the laptop to get all the necessary updates that will fix the problems.

  In a value of the case, recover the laptop and does not perform the updates of windows

• Satellite A200-10W: incorrect serial number activation of information products online

  Hello

  I just bought a Toshiba satellite A200-10w.
  When I activate the product Toshiba online information I get the message 'Bad serial number', even if I get good one who is at the bottom of my laptop.

  What can be the problem?
  Thanks for your help.

  Hello

  Really put a good number? You do not mixed numbers or letters?
  Sometimes people insert a wrong number or mixed number with a letter; for example, zero and o

• laptop connected to an external monitor with vga cable issues?

  1The votefavorite

  I use a Sony Vaio e series laptop running windows 7 Home premium 64-bit, which I always connect to an external monitor with a VGA cable. I put graphics options to display only on the external monitor and I would like to close the lid of the laptop. In the power settings I put it do nothing when the lid closes. When it is connected to the external screen I am able to look at the screen very well if the lid of the laptop is open. But whenever I close the lid, the display on the external monitor is turned off. I have tried everything I can think of as the use of a keyboard to toggle the display, change the plan to plug the monitor off before and after and even more, to much to list etc. I actually did it on my HD TV using a Hdmi cable that allows me to close the lid. But I want to use it only on my monitor that is sadly only VGA. I know I'm not alone here, I found many forums on the same issue, but nobody seems to have an answer. It is always with the help of a VGA cable when I find others with the same problem. Does anyone know where a response? It seems either VGA may be quite old now since the introduction of HDMI, that Microsoft has not bothered to look on this or get out an update to resolve this issue. Sorry it's just very frustrating because cannot find an answer, and I don't like the laptop overheating or wasting money on energy.

  (1) right click on your power Option icon on the taskbar

  (2) will take you to Options below

  Control Panel:

  Choose what closing the lid"this choice is the 3rd in your list of choices

  The next screen will allow you to configure your choice:

  When I close the lid:

  On battery: do nothing and

  Plugged in: Do nothing

  This will prevent your system/video to go to sleep or stopping

  Hope this helps

• Re: Dual mode does not not on Satellite A200-10W

  Hello

  I m using Toshiba Satellite A200-10W but I suddenly found that the mode of double in my touchpad no longer works!

  My OS is Windows XP Service pack 2.
  By the way I checked what written here [http://aps2.toshiba-tro.de/kb0/HTD9702NL0000R01.htm] and I found all my settings are correct!
  Is it possible to restore double to my touchpad mode?

  Post edited by: sshehab

  Hello

  Maybe stupid question now but what do I tell exactly with dual-mode touchpad?
  Have you checked the touchpad settings?

• Qosmio X 500 - 13R: picture on external monitor with resolution 2560 x 1440 is blurred

  Hi all

  I have a computer laptop X 500 - 13R Toshiba Qosmio, although 2 years, still a great piece of hardware.

  I just bought a new monitor 27 "U2713HM which supports a resolution of 2560 x 1440.

  Computer video card notebook (GTX 460 m) supports a resolution higher than through a digital connection, so I used a HDMI cable to connect.

  Via Control Panel Nvidia, I could create a custom resolution, but the image is not clear / is blurred.
  It is readable, but it's just not everything.

  Tried with HDMI 1.4, without success.
  I volunteered to connect through Dual Link DVI cable, but the phone doesn't have a DVI connector, and I doubt the adapter will help.

  Anyone has a suggestion how to fix this problem?

  Thank you.

  I would like to share my experience using an external monitor with a HDMI cable.
  My monitor supports both HDMI and DVI port.
  First of all, I plugged my laptop on the external monitor using a HDMI cable to HDMI.
  But the fonts and the picture was not clear. I used the resolution 1920 x 1080

  Then I went to the DVI port. I plugged the laptop s HDMI port to monitor s port DVI (HDMI/DVI cable) and that solved my problem.

  I'm not quite sure the relevance of m this could be for you, but it worth the try

• Satellite A200-10W - where to find drivers for 64-bit Windows 7?

  I have a laptop Satellite A200-10W. Now I have vista x 86 installed, but I want to switch to windows 7 64 bit, but I don't know where to find the drivers because on the Web site, I can't find these.

  Can someone help me? How can I use sound card, network card, webcam and others if I don't have these drivers?

  Hello!

  I checked the page Toshiba, Satellite A200-10W belongs to the PSAECE series and so I was able to find only the Vista 64 bit drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally, these drivers are also working on Windows 7, then you should try. Perhaps all will work them and if you have Windows 7 with all the drivers. :)

• Satellite A200-10W and 64-bit support

  Hello

  I bought a Satellite A200-10W and I replaced the 1 GB of RAM with 2 x 2 GB RAM cards, but I don't see a 3.07 GB of RAM. This means that the processor architecture is 32-bit, and he cannot use a 64 bit OS or what?

  Please notify.

  Thank you

  Hello

  I think that the answer to your question, you can find in this document http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  Good bye

• Satellite A200 - 10W PSAECE - BIOS need for Vista 64-bit

  Hello

  I'm having problems trying to update my BIOS under Vista 64-bit of the system. The plashnt.sys driver generates an error when loading.
  On the update of the BIOS page I can't find no 64-bit BIOS update for my laptop Satellite A200-10W (PSAECE). Also I've seen most of the computers portable ETA is updates of BIOS of 2009 and my update to the newest BIOS comes from 2007 (version 1.80 for Windows Vista)!

  The reason why I'm trying to update my BIOS:
  I have recently installed 4 GB of RAM on my laptop, the screen of the BIOS reports 4 GB but during POST, there are only 3! Vista reports also only 3 GB of physical memory total. I ran a series of landmarks and notes I got using 4 GB are well below the marks using only 2.
  Memory modules have been tested on another laptop and none of these problems has occurred (another laptop of the manufacturer).

  So I really need a sollution to update my BIOS and prefferably a BIOS update of 2009 available for download.

  On the other hand, I was looking for specifications of my laptop on the Toshiba site and I couldn't find my model on the current models, or models discotinued page. In 2007, when I bought the laptop, it was listed as new on the current page of models, so I expect at least to see it in the abandoned list.

  Thank you for your time!

  > 1. Why there is no updated BIOS newer than that of 2007 and
  There is no update of the most recent BIOS as Toshiba didn t release new updates.
  Why? Who knows maybe a new update is not necessary.

  > . Why my laptop is not listed in the discontinuous model (Satellite a200 - 10w psaece)
  Why should it be included as a discontinued model? The A200 series is not very old... so I n t think that this series could be abandoned

• Is the Satellite A200-10W supports a PCMCIA slot II type

  I want to know if the side slot on the satellite A-200-10w is a PCMCIA type II port and if not, adapters external usb for the same thing?

  Hello Hari

  Satellite A200-10W does not support PCMCIA location.
  The A200 supports only the Express Card location that is placed on the left side for laptop.

  > I get external USB for the same (PCMCIA) adapters

  Don t think so. I didn't see any USB key that would allow any PCMCIA interface.

  But I rally don't know why you want to use a PCMCIA card if the Express card slot is available.
  Using cards designed for Express card slot ;)