Satellite A200-10W - update BIOS need

I've got A200-10W for a few years and a year and a half I decided to change the form of Vista 64 bit do Windows 7 64 bit, I installed it, everything worked fine until a month ago what problems began to occur.

When the BIOS screen it shows sometimes freezes and sometimes takes a minute to move to Windows 7 loading screen, I checked the BIOS version and it's 1.40 (yes I'm a fool to update only not earlier), so I decided to update the BIOS but I can't find no updates except 1.80 for Vista 32 bit can someone please help with this? =(

SRY for grammar bar



I agree with Akuma. You can always try the 32-bit version of Vista, it s has nothing to do with your 64-bit system. If it s is not compatible, you get an error message.

But unfortunately I doubt THAT BIOS will help you. If the computer hangs at the BIOS screen, that it might be related to hardware. Possibly peut t computer recognize part of properly hardware like RAM, HARD drive, or something else.

Until you try to update the BIOS to load the defaults (F9 key). Save & Exit new parameters and test again if the error occurs or not.

Tags: Toshiba

Similar Questions

  • Satellite A200 - 10W PSAECE - BIOS need for Vista 64-bit


    I'm having problems trying to update my BIOS under Vista 64-bit of the system. The plashnt.sys driver generates an error when loading.
    On the update of the BIOS page I can't find no 64-bit BIOS update for my laptop Satellite A200-10W (PSAECE). Also I've seen most of the computers portable ETA is updates of BIOS of 2009 and my update to the newest BIOS comes from 2007 (version 1.80 for Windows Vista)!

    The reason why I'm trying to update my BIOS:
    I have recently installed 4 GB of RAM on my laptop, the screen of the BIOS reports 4 GB but during POST, there are only 3! Vista reports also only 3 GB of physical memory total. I ran a series of landmarks and notes I got using 4 GB are well below the marks using only 2.
    Memory modules have been tested on another laptop and none of these problems has occurred (another laptop of the manufacturer).

    So I really need a sollution to update my BIOS and prefferably a BIOS update of 2009 available for download.

    On the other hand, I was looking for specifications of my laptop on the Toshiba site and I couldn't find my model on the current models, or models discotinued page. In 2007, when I bought the laptop, it was listed as new on the current page of models, so I expect at least to see it in the abandoned list.

    Thank you for your time!

    > 1. Why there is no updated BIOS newer than that of 2007 and
    There is no update of the most recent BIOS as Toshiba didn t release new updates.
    Why? Who knows maybe a new update is not necessary.

    > . Why my laptop is not listed in the discontinuous model (Satellite a200 - 10w psaece)
    Why should it be included as a discontinued model? The A200 series is not very old... so I n t think that this series could be abandoned

  • P870 PSPLFE satellite - cannot start update BIOS - need to fix the NumLock key


    first of all, sorry for my English I'm from Germany;
    to PSPLFE P870 of my wife, I need to open the installer, because the NumLock key does not work, and I think that in the setup there is a possibillty to fix...

    Please, could someone help me


    Why do you think that the BIOS update will fix your NumLock key question?
    At this key in the past book running the same BIOS?

    The NumLock key works correctly using external USB keyboard?
    If key and your keyboard controller BIOS are OK and the problem is with the internal keyboard.
    Replacement keyboard for most could solve the problem.

  • Satellite A200-10W: I lost dual-mode Touchpad after Windows update

    I got a satellite A200-10W. The touchpad worked well at the beginning. Then, an update of windows has been installed and I lost dual mode on my touchpad.

    It is for me a normal function as a touchpad, but the mode button does not work. It lights, it do give me the button options, volume control does not work it did not scroll even in normal mode either.
    I reinstalled the drivers both synaptics and alps, but nothing helped.

    How can I ever use dual-mode again?

    Thanks for any help!


    Very strange I didn't noticed any problem with the touchpad after the windows update.
    I have updated my windows and then lost the sound. After restarting again I ran the update and the Øresund back

    But if you, it seems that the MS updates could be a bad influence on the functions of touchpad.

    Have you chosen the touchpad drivers just for the PSAECE series?
    The Synaptics Touch Pad driver to set the properties and the touch pad control functions.
    And the Alps Electric Touch Pad Driver allows you to set the properties and functions of mouse control.

    Perhaps you need to configure the settings again after the new installation of drivers touchpad?  :|

    But have you tried to update to Windows Vista again? Sometimes, you have to restart the laptop to get all the necessary updates that will fix the problems.

    In a value of the case, recover the laptop and does not perform the updates of windows

  • Is it perhaps connect my Satellite A200-10W for TV

    I could connect my satellite A200-10W to TV?
    If so, should what device I buy?

    Yes you can, simply buy a S-video ( cable you connect and you also need an Audio cable that can give an audio output to the TV (

  • Re: Dual mode does not not on Satellite A200-10W


    I m using Toshiba Satellite A200-10W but I suddenly found that the mode of double in my touchpad no longer works!

    My OS is Windows XP Service pack 2.
    By the way I checked what written here [] and I found all my settings are correct!
    Is it possible to restore double to my touchpad mode?

    Post edited by: sshehab


    Maybe stupid question now but what do I tell exactly with dual-mode touchpad?
    Have you checked the touchpad settings?

  • Satellite A200-10W - where to find drivers for 64-bit Windows 7?

    I have a laptop Satellite A200-10W. Now I have vista x 86 installed, but I want to switch to windows 7 64 bit, but I don't know where to find the drivers because on the Web site, I can't find these.

    Can someone help me? How can I use sound card, network card, webcam and others if I don't have these drivers?


    I checked the page Toshiba, Satellite A200-10W belongs to the PSAECE series and so I was able to find only the Vista 64 bit drivers: > support & downloads > download drivers

    Normally, these drivers are also working on Windows 7, then you should try. Perhaps all will work them and if you have Windows 7 with all the drivers. :)

  • Satellite A200-10W and 64-bit support


    I bought a Satellite A200-10W and I replaced the 1 GB of RAM with 2 x 2 GB RAM cards, but I don't see a 3.07 GB of RAM. This means that the processor architecture is 32-bit, and he cannot use a 64 bit OS or what?

    Please notify.

    Thank you


    I think that the answer to your question, you can find in this document

    Good bye

  • How to set the memory of the Geforce 7300 in Satellite A200-10W?

    my laptop Satellite A200-10W, came with a Geforce 7300.
    I know that the card has its 256 MB dedicated memory, but I don't know how to use shared memory.
    In other how can words, I use the committed memory, as well as the memory shared of my cards.
    Thank you.


    just for info: won´t you get more than 256 MB of RAM. The only graphics memory is your dedicated, I Don t know what you mean with that shared, in my view, there is no available shared mem.

    Welcome them

  • Question about the use of with Satellite A200-10W USB network card

    Can I possibly use a wireless-G USB network adapt to my Satellite A200-10W [with Wi - Fi Finder]? Pls advise. Thank you.


    Why not? Surely, you can use this stick with your machine. Just put em in a USB slot, install the drivers and then let go! :)

    If you have any other questions, then just ask.

    See you soon

  • Satellite A200-10W - external monitor with graphics problem

    I connected my monitor from my old pc with my Satellite A200-10W and I seted as primary and I closed the laptop screen.

    I find colors to the pc and the games, but I'm not so happy when I play a movie on my satellite.
    same movie, same monitor different pc only and I get lowest graphics.
    There is no way to fix it?

    My problem is that when I saw a movie avi or dvd

    You compare a TFT screen with a CRT monitor?
    Hey Buddy don't compare because the two screens are completely different!

    I don t want to describe the technology all in details, but if you want you can read a few articles on Wikipedia:

    just a hint; you will always notice a difference between the two screens while watching a movie or similar!

  • Is the Satellite A200-10W supports a PCMCIA slot II type

    I want to know if the side slot on the satellite A-200-10w is a PCMCIA type II port and if not, adapters external usb for the same thing?

    Hello Hari

    Satellite A200-10W does not support PCMCIA location.
    The A200 supports only the Express Card location that is placed on the left side for laptop.

    > I get external USB for the same (PCMCIA) adapters

    Don t think so. I didn't see any USB key that would allow any PCMCIA interface.

    But I rally don't know why you want to use a PCMCIA card if the Express card slot is available.
    Using cards designed for Express card slot ;)

  • Satellite A200-10W: cannot use shortcut keys Fn after installing XP

    I installed the XP drivers a new? Control, drivers, Hotkey Utility, but problem is staying. I can't? t use these keyboard shortcuts. Any ideas?


    Satellite A200-10W belongs to the PSAEC series.
    Are you sure you used the right drivers for the A200 series right?

    In addition, I would recommend installing all the drivers available XP and tools on Toshiba as Chip Set Utility or hardware configuration page

    See you soon

  • Satellite A200-10W: incorrect serial number activation of information products online


    I just bought a Toshiba satellite A200-10w.
    When I activate the product Toshiba online information I get the message 'Bad serial number', even if I get good one who is at the bottom of my laptop.

    What can be the problem?
    Thanks for your help.


    Really put a good number? You do not mixed numbers or letters?
    Sometimes people insert a wrong number or mixed number with a letter; for example, zero and o

  • Satellite A200 - 28H - update of the BIOS has not


    I have a Satellite A200 28 h.
    {color: #ff0000} * I try to upgrad my bios of my laptop froze I turned it off using the highlight of power
    * now its dead please help me to save my pc *.


    {color: #ff0000} System properties:
    {color} {color: #ff0000} Manufacturer: {color} TOSHIBA
    {color: #ff0000} Product: {color} Satellite A200
    {color: #ff0000} Version: {color} PSAE6E-0GL045FR
    {color: #ff0000} Serial number: {color} 38258574K
    {color: #ff0000} Identifying unique universal: {color} 5FDE397F-EFCD11DC-91D0001E-EC32FB26
    {color: #ff0000} Startup type: {color} power button
    {color: #3366ff} Properties of the motherboard {color}:
    {color: #ff0000} Manufacturer: {color} TOSHIBA
    Product: ILHAM
    {color: #ff0000} Version: {color} 1.00
    {color: #ff0000} Serial number: 0123456789AB {color}.
    I downlod this bios: [update of the BIOS | = 2 & selFamily = 2 & selSeries = 153 & selProduct = 738 & langua ge = 16 & selOS = 26 & selType = 4 & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = 45 & 1 6 = selectedLanguage & type = 4 & page = 1 & FROM = vista & ID = 66222 & DISO = 26 & pilot language = 42 | bios] -.

    Driver details
    To download your chosen file just click on the file below. When prompted, select "Save this file to disk" and select "OK".
    The file will then be downloaded and saved to a location specified on your computer.
    Downloaded files can be opened and extracted using WinZip (select the WinZip link to download a copy of WinZip software).
    See below or check the contents of the zip for installation details. [Update to the BIOS: _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1] [Return to the download page of Driver: _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1]

    FTP - URL [|] [calleula.asp? ID = 66222 |] Date last modified01/21/09CompanyToshibaTypeBIOS WideDescription 1906Version2.60 - WIN32LanguageUniversalCountryWorld UpdateSubtypewindows-basedSize (KB)

    This Bios update adds functionality to your system. {color: #ff0000}
    This Bios is only compatible for portable computers with Windows Vista! (32-bit only!) {color}

    (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
    When the computer comes on, the BIOS is launched to perform various functions to start.)
    For the detailed update information please see [Information update BIOS Toshiba |]

    ModelEquium A200 (PSAE5), {color: #ff0000} Satellite A200 (PSAE6), {color} Satellite Pro A200 (PSAE7), Equium A200 (PSAE8), Satellite A200 (PSAE3), Satellite Pro A200 (PSAE4) operating systemWindows Vista 32 bit

    How do you do if your laptop does not start and if there is no action of the machine?
    I just think only technician ASP could help you maybe the motherboard (ROM chip) is not dead, but it can check only the technician for laptop

Maybe you are looking for